Atch_01,_PWS,_USATA_NG-0047-18.pdf

USATA NG-0047-18

Attachment 01

PERFORMANCE WORK STATEMENT

REFURBISHMENT AND UPDATE OF

ULTRAX MODEL H-60 UxVALIDATOR

1.0 GENERAL. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to acquire commercial factory services to provide factory refurbishment and upgrade to a UxValidator, Model H-60, manufactured by Ultrax Aerospace, Inc. of Lee’s Summit, MO.

2.0 CONTRACTOR TASKS.

2.1 Reference Ultrax Aerospace RMA 10200 dated 23 February 2018, the Ultrax Model H-60 UxValidator, Serial No. 3X4510476, a preliminary review of the unit indicates that a factory refurbishment and upgrade is required to restore the unit to full factory operating specifications, to include calibration and updating of proprietary product firmware. Calibration shall be compliant to ISO-IEC 17025.

2.2 The Contractor shall not provide repair or other services outside the scope of this contract without authorization from the government Contracting Officer.

2.3 The Contractor shall complete required tasks and return-ship the unit in accordance with the performance completion date at Section B of the contract.

3.0 GOVERNMENT TASKS.

3.1 The U.S. Army TMDE Activity, Redstone Arsenal, AL (Acceptance DODAAC: W80RA6) shall be responsible for receiving, inspection and acceptance in DFAS Wide Area Workflow

(WAWF).

3.2 The government shall be responsible for shipment from the government facility to the Contractor’s facility.

4.0 PLACE OF PERFORMANCE. Performance shall take place at the Contractor’s factory facilities only.

5.0 PERIOD OF PERFORMANCE. The Contractor shall complete performance in accordance with Section B of the contract.

6.0 GOVERNMENT-FURNISHED EQUIPMENT. None.

7.0 QUALITY REQUIREMENTS. Not Applicable.

8.0 CONTRACTOR MANPOWER REPORTING REQUIREMENT – SERVICE CONTRACTS.

8.1 Department of the Army requires reporting of all contractor labor hours associated with services, to include repair, provided to United States Army organizations; therefore,

8.2 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contractor for the U.S. Army TMDE Activity via secure data collection site. The contractor is required to completely fill in all required

USATA NG-0047-18

Attachment 01 data fields using the following web address: https://cmra.army.mil, and then click on “Department of the Army CMRA” or the icon of the DOD organization that is receiving or benefiting from the contracted services.

8.3 Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2018. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website.