Atch_01,_PWS,_NG-0026-18.pdf

USATA NG-0026-18

Attachment 01

PERFORMANCE WORK STATEMENT

FOR REPAIR AND CALIBRATION OF TEKTRONIX

MODEL DPO4104 OSCILLOSCOPE

1.0 GENERAL. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to acquire commercial factory repair and accredited calibration of a Model DPO4104 Oscilloscope, Serial Number 80009, manufactured by Tektronix, Incorporated.

The Oscilloscope is managed by the U.S. Army TMDE Support Center at Aberdeen Proving Ground, MD.

2.0 CONTRACTOR TASKS.

2.1 The Tektronix Model DPO4104, S/N 80009, Oscilloscope requires repair to the “trigger output.” Therefore, the contractor shall furnish all labor, material and equipment required to provide diagnosis, repair and ISO 17025 calibration of the unit in accordance with the manufacturer’s specifications

2.2 The Contractor shall furnish all labor, material and equipment required to provide diagnosis, repair and calibration of the items in accordance with the manufacturer’s specifications.

2.3 NOTE: The Contractor shall not provide repair or other services outside the scope of this contract without authorization from the government Contracting Officer identified at page 1 of the contract.

3.0 GOVERNMENT TASKS.

The U.S. Army TMDE Activity, Redstone Arsenal, AL (Acceptance DODAAC: W80RA6) shall be responsible for receiving, inspection and acceptance in DFAS Wide Area Workflow (WAWF) for all units.

4.0 PLACE OF PERFORMANCE. Performance shall take place at the Contractor’s facility.

5.0 PERIOD OF PERFORMANCE. The Contractor complete performance in accordance with Section B of the contract.

6.0 GOVERNMENT-FURNISHED EQUIPMENT. None.

7.0 QUALITY REQUIREMENTS. Not Applicable.

USATA-NG-0026-18

Attachment 01

8.0 CONTRACTOR MANPOWER REPORTING REQUIREMENT – SERVICE CONTRACTS.

[NOTICE: THE FOLLOWING IS MANDATORY FOR AWARD OF A GOVERNMENT SERVICE

CONTRACT:]

8.1 Department of the Army requires reporting of all contractor labor hours associated with services, to include calibration and repair, provided to United States Army organizations;

therefore,

8.2 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contractor for the U.S. Army TMDE Activity via secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: https://www.cmra.army.mil, and then click on “Department of the Army CMRA” or the icon of the DOD organization that is receiving or benefiting from the contracted services.

8.3 Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2018. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website.

https://www.cmra.army.mil/