Atch_01,_PWS,_NG-0020-18.pdf

USATA NG-0020-18

Attachment 01

PERFORMANCE WORK STATEMENT

REPAIR & RETROFIT OF DIGITAL MEASURING MACHINE

1.0 GENERAL. The U.S. Army Test, Measurement and Diagnostic Equipment Activity (USATA) has a requirement to acquire commercial factory services to provide on-site repair and retrofit of a Digital Measuring Machine, Model U302584, Serial No. D6835 manufactured by Pratt and Whitney Measurement System, Inc. The unit is located at USATA’s TMDE Support Center, Warren, MI.

2.0 CONTRACTOR TASKS.

2.1 The Contractor shall be required to provide a machine retrofit utilizing hand-scraped Measuring Machine Bed, microscope and accessories. The completed retrofit will include:

2.1.1 New Digital headstock (hand-scraped)

2.1.2 Adjustable Pressure Tailstock

2.1.3 Digital Readout with Inch/Metric mode

2.1.4 RS232C Output

2.1.5 Power Unit

2.1.6 Column for DRO

2.1.7 Instruction Manual

2.1.8 Factory Set-up and Training (on-site)

2.2 The Contractor shall furnish all labor, material and equipment required to provide preventive repair/retrofit on-site at the government facility and in accordance with the manufacturer’s specifications.

2.3 The Contractor shall not provide repair or other services outside the scope of this contract without authorization from the government Contracting Officer.

3.0 GOVERNMENT TASKS.

3.1 The U.S. Army TMDE Activity, Redstone Arsenal, AL (Acceptance DODAAC:

W80RA6) shall be responsible for receiving, inspection and acceptance in DFAS Wide Area Workflow (WAWF).

3.2 The Government shall provide adequate storage space for spare parts, tools and test equipment required by the Contractor in performance of Contractor tasks, as well as adequate working space, to include desks, chairs, heating, lighting, ventilation, electrical current and outlets for tools and test equipment for use by the Contractor’s customer support technicians. These facilities shall be within a reasonable distance of the equipment to be services and shall be provided at no additional cost to the Contractor.

3.3 Subject to applicable security regulations, the Government shall provide the Contractor access to the equipment to perform the required upgrades.

4.0 PLACE OF PERFORMANCE. Performance shall take place at government facilities located at TMDE Support Center, Detroit Arsenal, Warren, MI.

5.0 PERIOD OF PERFORMANCE. The Contractor shall complete performance in accordance with Section B of the contract.

6.0 GOVERNMENT-FURNISHED EQUIPMENT. None.

7.0 QUALITY REQUIREMENTS. Not Applicable.

8.0 CONTRACTOR MANPOWER REPORTING REQUIREMENT – SERVICE

CONTRACTS.

8.1 Department of the Army requires reporting of all contractor labor hours associated with services, to include repair, provided to United States Army organizations; therefore,

8.2 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contractor for the U.S. Army TMDE Activity via secure data collection site. The contractor is required to completely fill in all required data fields using the following web address:

http://www.cmra.army.mil, and then click on “Department of the Army CMRA” or the icon of the DOD organization that is receiving or benefiting from the contracted services.

8.3 Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30.

While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2018. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website.

http://www.cmra.army.mil/

[Notice: Contractor shall be required to perform on-site services at government facility located at the Tank and Automotive Command (TACOM), Warren, MI; therefore, the following paragraph is applicable.]

9.0 Access and general protection/security policy and procedures. This standard language is for contractor employees with an area of performance within an Army controlled installation, facility, or area. Contractor and all associated subcontractors employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DoD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.