SOW USG Snow White Filler_FY27_11NOV2026.pdf

PDF 171 KB Posted

Attached to
Anhydrous Calcium Sulfate (USG Snow White)
Solicitation number
W15QKN-27-Q-1CXZ
Issued by

About this file

This is a Statement of Work (SOW) for the supply of Anhydrous Calcium Sulfate (USG Snow White Filler) to the U.S. Army DEVCOM-AC's Ballistic Evaluation Center at Picatinny Arsenal, New Jersey. The contractor shall provide a minimum quantity of 6,000 pounds per delivery order, up to four times annually (maximum 24,000 pounds per year), over a five-year (60-month) ordering period. All deliveries must be shipped FOB Destination and comply with detailed physical and chemical specifications including specific gravity of 3, pH of 10.4, Mohs hardness of 2-3, oil absorption of 25-27 percent, and bulk density requirements. The material must meet precise sieve analysis specifications with 100 percent passing through 50 mesh and 97.0-100.0 percent passing through 325 mesh, as well as defined microtrac particle size distribution requirements. Chemical analysis must confirm 98.7 percent CaSO4 content with specified limits on carbonates, aggregates, and moisture.

The contractor shall perform all manufacturing, processing, packaging, and quality assurance testing at off-site commercial facilities with no operations permitted on government property. Material must be packaged in heavy-duty, moisture-resistant, multi-wall bags with plastic liners containing 50 pounds net weight per bag, stacked on 40-by-48-inch wooden pallets with individual pallet loads not exceeding 2,500 pounds including tare weight, fully weatherproofed with plastic shrouding prior to stretch-wrapping. Each delivery must be accompanied by a Certificate of Analysis (CDRL A001, DI-MISC-80678) in both hard copy with packing slip and digital PDF format. Material delivery is required within 10 days of order receipt or as specified in individual delivery orders. The contractor must provide 48 hours' notice before delivery and ensure compliance with Picatinny Arsenal security screening, base access control, and identification requirements, with delivery drivers presenting valid REAL ID-compliant identification, current commercial vehicle registration, and active proof of insurance.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK

FOR

Anhydrous Calcium Sulfate (USG Snow White Filler)

1.0 SCOPE

1.1 The contractor shall provide a minimum quantity of six thousand (6,000) pounds of Anhydrous Calcium Sulfate per delivery order, up to four (4) times per year (up to 24,000 lbs. annually), for a five-year (60-month) ordering period.

1.2 Deliveries shall be shipped FOB Destination to the designated receiving facility at Picatinny Arsenal, NJ, identified in Section 7.0 of this Statement of Work

(SOW).

1.3 The supplied material shall meet the standards outlined in section 3.0 of this statement of work.

1.4 Classification: This effort is UNCLASSIFIED.

2.0 APPLICABLE CODES, STANDARDS, AND DOCUMENTS

The following documents, standards, and specifications of the issue listed form a part of this SOW to the extent specified herein:

2.1 American National Standards Institute (ANSI)

2.2 American Society for Testing and Materials (ASTM)

2.3 Institute of Electrical and Electronic Engineers (IEEE)

2.4 National Electrical Manufactures Association (NEMA)

2.5 National Fire Protection Association (NFPA) 13 2007

2.6 National Fire Protection Association (NFPA) 15 2007

2.7 Underwriters Laboratory (UL)

2.8 NFPA 70, National Electrical Code (NEC) 2005

2.9 29 CFR 1910.1200 Occupational Safety and Health Administration (OSHA)

Standards

2.10 Certificate of Authentication and Certificate of Analysis (CoA) DD1423 A001

3.0 TECHNICAL AND MATERIAL REQUIREMENTS

3.1 Quantity & Schedule: The Contractor shall manufacture or provide a minimum quantity of 6,000 lbs. of Anhydrous Calcium Sulfate per delivery order, up to four (4) deliveries per year (up to 24,000 lbs. annually, or as specified on individual delivery orders), over a five-year (60-month) contract period.

3.2 Intended Use: Deliveries are for use at the Ballistic Evaluation Center at Picatinny Arsenal, NJ, in accordance with the applicable physical and chemical specifications and quality requirements defined herein.

3.3 Quality Verification: Each lot delivered shall be accompanied by a Certificate of Analysis (CoA) in accordance with CDRL A001 (DI-MISC-80678) certifying compliance with the physical and chemical properties listed below:

Physical Properties Specific Gravity 3 pH—10% Slurry 10.4 Mohs Hardness 2-3 Refractive Index 1.6 Oil Absorption 25-27 Loose Bulk Density (lbs./ft.3) 50 Packed Bulk Density (lbs./ft.3) 70

L, a, b values 90.4, 1.2, 3.4

Median Particle Size (microns) 5.5 Top Particle Size (microns) 124

3.4 Chemical analysis of the provided material must meet the following specifications:

Typical Chemical Analysis % CaSO4 98.7 CaCO3 • MgCO3 0.5 CaCO3 0.3 Aggregate 0.3 Free Moisture at 45 °C (113 °F) 0.1 Combined Moisture at 225 °C (437 °F) 0.5

3.5 Sieve analysis of provided material must meet the following specifications:

Sieve Analysis % Through 50 mesh (300 microns) 100 Through 100 mesh (150 microns) 99.9 – 100.0 Through 200 mesh (75 microns) 99.9 – 100.0 Through 325 mesh (44 microns) 97.0 – 100.0

3.6 Microtrac analysis of provided material must meet the following specifications:

Microtrac Analysis % Smaller Than % 22 microns 80 11 microns 55

5.5 microns 30

4.62 microns 24

1.945 microns 4

0.972 microns 0.1

5.0 PACKAGING, PALLETIZATION, AND MARKINGS

4.0 Unit Packaging: Material shall be packaged in heavy-duty, moisture-resistant, multi-wallpaper bags with plastic liners, containing 50 lbs. net weight of material per bag.

4.1 Palletization: Bags shall be stacked, secured, and delivered on standard 40 in.

x 48 in., four-way entry wooden pallets conforming to commercial shipping standards.

4.2 Weight & Load Constraints: No individual pallet load (including the pallet tare weight) shall exceed 2,500 lbs. Pallet loads shall be wrapped securely with heavy-duty film (i.e. stretch wrap) to prevent shifting or transit damage.

4.3 Weatherproofing: Pallet loads must be fully covered with a weather-resistant plastic shroud or top cap prior to stretch-wrapping to protect the hygroscopic material from ambient moisture and humidity during transit and offloading.

4.4 Markings: Each individual bag and external pallet wrap shall be clearly labeled with the Manufacturer’s Name, Product Name/Trade Designation, Lot/Batch Number, Date of Manufacture, and Net Weight.

6.0 PLACE OF PERFORMANCE AND SITE ACCESS

6.1 Off-Site Performance: The Contractor shall perform all manufacturing, processing, assembly, packaging, and quality assurance testing at its own or subcontractor commercial facilities. No manufacturing, chemical processing, packaging or industrial operations shall be conducted on Government property.

6.2 Site Access Limitations: : The Contractor is not required to provide continuous or permanent on-site labor or technical services at Picatinny Arsenal. Physical access to Picatinny Arsenal is restricted to freight delivery, initial carrier check-in, and receiving hand-off activities as outlined in Section 7.0.

6.3 Installation Access Compliance: The Contractor and its designated freight carriers shall ensure full compliance with all Picatinny Arsenal commercial vehicle security screening, base access control, and identification requirements in effect at the time of delivery.

7.0 DELIVERY, BASE ACCESS AND RECEIVING

7.1 Delivery Schedule & Terms:

o Material must be delivered no later than 10 days after receipt of order (ARO) or as stipulated in the individual delivery order.

o Deliveries shall be executed FOB Destination.

7.2 Delivery Address:

Commander, US ARMY DEVCOM-AC ATTN: Ballistic Evaluation Center / CO TBD Building: TBD Picatinny Arsenal NJ 07806

7.3 Carrier Requirements and Security Regulations:

o The Contractor shall notify the receiving point of contact (POC) / Contracting Officer’s Representative (COR) at least forty-eight (48) hours prior to anticipated arrival to facilitate security clearance and dock readiness.

o Delivery drivers must present valid REAL ID-compliant identification, current commercial vehicle registration, and active proof of insurance at the Picatinny Arsenal Commercial Truck Inspection Station.

8.0 DELIVERABLES (CDRL SUMMARY)

Exhibit / CDRL

CDRL A001 (DI-MISC80678) – Certificate of Analysis (CoA) & Certificate of Conformance (CoC) – Accompanying each lot shipment. The Contractor shall deliver a hard copy with packing slip and digital PDF via email.

File details come from the government source that posted it. Updated .