Waterless_Toilets-Urinals_Specs_FY_19.docx

Requirements for the Latrine Waterless Toilets The waterless toilets shall be fabricated from 18 gauge type 304 stainless steel. The floor extension shall be fabricated from 24 gauge type 304 stainless steel. The construction shall be spot welded with exposed stainless surfaces polished to a #4 finish.

The waterless toilet shall include an 18 gauge stainless steel seat with piano hinge and 1-1/2 inch wide floor flange with 3/8 inch anchor holes. Anchoring hardware shall be provided by others.

The waterless toilet shall be as manufactured by Willoughby, Model WT-2016, or an approved equal.

Structural Design Requirements Engineering drawings shall be available to plan for required dimensional tolerances.

Support The awarded vendor shall provide a help desk phone number if the troops have questions upon assembly.

Vendor Requirements The vendor shall have the ability to accept a purchase order from the Federal Government.

Supporting Documentation Installation instructions shall be included with the shipment. The instruction should include suggested tools for mounting.

Shipment The vendor shall have the capability to deliver the order on a pre-determined date. Delivery driver shall have the valid credentials to enter the military installation. Terms of shipment shall be F.O.B Destination – Fort Dix, NJ.

Sheet 1 of 2 Requirements for the Stainless Steel Urinals The stainless steel urinals shall be fabricated from 14 gauge type 304 stainless steel. The unit shall be seamlessly welded to form a one piece. Tamper resistant fixture. Exposed surfaces shall be polished to a #4 satin finish.

The urinal shall come with a beehive type strainer, P-trap, and vandal resistant stainless steel trap enclosure. The concealed anchor rods and fasteners shall be fabricated from plated steel. A 1-1/2 in. OD P-trap with 2 in. long tailpiece shall be included for slip-joint connection.

Structural Design Requirements Installation rough-in drawings shall be provided by the manufacturer.

Support The awarded vendor shall provide a help desk phone number if the troops have questions upon assembly.

Vendor Requirements The vendor shall have the ability to accept a purchase order from the Federal Government.

Supporting Documentation Installation instructions shall be included with the shipment. The instruction should include suggested tools for mounting.

Shipment The vendor shall have the capability to deliver the order on a pre-determined date. Driver shall have valid credentials to enter the compound. Terms of shipment shall be F.O.B Destination – Fort Dix, NJ.

Sheet 2 of 2