SPECS_-Salvaior_Model_300.pdf

FOOD WASTE DISPOSER

SPECIFICATIONS

CORROSION RESISTANT BODY

Permanent molded from heat treated aluminum alloy.

EXTENDED LIP WATER SEAL

Protects the motor from damage by water.

TAPERED ROLLER BEARING

Provides longer motor life, quiet operation and shock absorbing.

WATER COOLED MOTOR

Provides maximum efficiency and longer life.

QUIET OPERATION

Extra thick rubber mounting adaptor and drain outlet isolates sound and eliminates vibration.

WASTE MIXING CHAMBER

Extra large to ensure proper mixture of water to waste.

n 208 Volts 3 Phase 8.8 Amps n 230 Volts 3 Phase 8.0 Amps n 460 Volts 3 Phase 4.0 Amps

FULL LOAD AMPS

JOB: Item No.:

NEMA 4 Watertight Controls

Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS

3 HP Model 300 u SPECIFY EXACT OPERATING VOLTAGE u

SCRAP

RING

ALL PIPING ½"

½" FIXED

NOZZLE

FOOD WASTE

DISPOSER

DISPOSER

CONTROL

OPTIONAL

CONE COVER VACUUM

BREAKER

2" or 3” DRAIN

SOLENOID

VALVE W/

WATER

FLOW

CONTROL

Cone Assembly

TABLE CUT-OUT:

12” CONE - 12 7/8”

15” CONE - 15 7/8”

18” CONE - 18 7/8”

NOTE: INSTALL PER ALL APPLICABLE CODES

MRSSMSS

ARSSARSS-2

The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA

1-800-SALVAJOR (816) 363 -1030 FAX: 1-800-832-9373

www.salvajor.com Email: sales@salvajor.com service@salvajor.com

Manufacturers of Commercial Food Waste Disposing Systems since 1944

Salvajor Model 300 Food Waste Disposer 3 HP – 3 Phase D E T A I L S A N D D I M E N S I O N S

SPECIFICATIONS:

MOUNTING – Rubber adaptor above grind chamber and rubber drain outlet isolates sound and eliminates vibration. No metal to metal contact.

EXTERIOR HOUSING – Permanent molded from heat treated, corrosion resistant aluminum alloy then computer machined to a smooth polished finish. Paint free.

SHREDDER – 9 inch diameter, machined high strength, wear resistant hardened carbide alloy.

ROTOR – 9 inch diameter with 4 cutter bars, machined high strength, wear resistant hardened carbide alloy.

MOTOR – 3 HP totally enclosed. Fan cooled and water cooled for efficiency and longer life.

Built-in manual reset thermal overload protection.

Available in 208-230/460 volts, 60 cycle, 3 phase.

BEARINGS – Tapered roller (top) Sealed ball (bottom)

SEAL – Extended Lip Water Seal.

WATER REQUIREMENT – 8 gallons of cold water per minute.

WASTE OUTLET – Rubber drain accepts 2” piping or 3” piping by removing drain insert.

DUAL DIRECTION GRINDING – Designed to operate in either direction. Direction of rotation can be controlled when installed with automatic reversing controls.

Reversing rotation can double cutting teeth life.

LEG SUPPORT – Single leg, adjustable.

ASSEMBLIES: (See Specification Sheet) CA – Cone Assembly with 12”, 15” or 18” Cone SA – Sink Assembly with 31⁄2” or 61⁄2” Sink Collar

DISPOSER CONTROLS: (See Specification Sheet) MSS: (Non Reversing) MRSS: (Manual Reversing) ARSS-2: (Automatic Reversing) ARSS: (Automatic Reversing with Water Saver)

20 7/8" (53.02)

5 5/8" (14.29)

5 3/4" (14.65)

11" (27.98)

8" (20.31)

8" (20.31)

1/2" NPT

WATER

INLET

1/2" NPT

WATER

INLET

1/2" FIXED

NOZZLE

16 5/8" (42.26)

30 3/4" (78.12) to

36 1/4"(92.08)

8 5/8" (21.96)

8 5/8" (21.96)

2" or 3"

DRAIN

2" or 3"

DRAIN

POWER

ENTRANCE

RESET

BUTTON

6 1/2" (16.51)

13" (33.02)

18" (45.72)

5 3/4" (14.65)

3/4" (1.91)

11" (27.98)

3 1/2" (8.89)

SINK OPENING

6 5/8" (16.83)

CUTOUT

POWER

ENTRANCE

RESET

BUTTON

13" (33.02)

17 7/8" (45.40)

5 5/8" (14.29)6 1/2" (16.51)

15" (38.10)

14 7/8" (37.78)

5 5/8" (14.29)6 1/2" (16.51)

12" (30.48)

25 1/8" (63.83) to

30 5/8"(77.79)

18" CONE 15" CONE

12" CONE

31/2" SINK MOUNT 61/2" SINK MOUNT

Printed in USA Form No.S300 (06-17)

SAMPLE SPECIFICATION

300 - CA- 18 ARSS (230/60/3)

Model Cone Disposer Size Control Assembly

Electrical Specs.

u SPECIFY EXACT OPERATING VOLTAGE u

NOTE: Dimensions in parenthesis are in centimeters (Specifications subject to change without notice)

Current specification details may be found online at www.salvajor.com