ASA_Dix_Latrine_Stalls_SOW.pdf

Statement of Work ASA Fort Dix

305th Aerial Port Squadron

TRTC BLDG 1757 Vandenberg Ave

MC GUIRE AFB NJ 08641

Latrine Stall Partitions:

Requirements for the Latrine Stall Partitions

The stall partitions shall be fabricated from solid phenolic material (color throughout) in a color as close to Army

Tan as possible. The partitions shall include the ability for floor mounting in addition head rail bracing. This is necessary due to the design of the latrines in which they will be installed.

The partitions shall be fabricated so that they can be installed on 32 inch center-to center distances. In addition, the design will be compatible with the building layout with a solid wall at both ends of the toilet area.

Purpose: The partitions shall be installed around the three (3) toilets (ea.) in the men’s and women’s side of the two (2) rebuilt latrines for a total of twelve (12) stalls. All mounting hardware (hinges, handles, toilet paper holder, coat hook, and mounting hardware) shall be included.

The floor mounted and head rail braced design shall include 80 inch pilasters that will go from the floor to a head rail that is located at least 12 inches above the doors and panels. A head rail is required for added strength and rigidity.

Structural Design Requirements

With submittal of quotes, vendors should submit technical specifications, any and all drawings of the manufactured partitions for approval by the TMD Engineer.

Support

Vendor will be responsible for the delivery of supplies, no set up or install is required.

The awarded vendor shall provide a help desk phone number for support if the troops have questions upon assembly.

Vendor Requirements

The vendor shall have the ability to accept a purchase order from the Federal Government.

Supporting Documentation

Vendor shall provide assembly drawings and instructions with the order. A comprehensive list of all required tools must be provided.

Shipment & Delivery:

The vendor shall have the capability to deliver the order 60 days after contract award.

Terms of shipment shall be F.O.B Destination – Fort Dix, NJ.

Vendor must have the capability to deliver and unload the shipment within the Fort Cantonment. Vendor must supply all equipment for unloading shipment. Vendor is responsible for delivery of supplies (either through themselves or a third party). All material will be delivered to BLDG. 5867 New Jersey Ave (Troop Construction

Warehouse) on cantonment.

Access to the Military Installation:

Contractor and all associated sub-contractors employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

Sheet 2 of 2