Vessel_Specifications.pdf

PDF 112 KB Posted

Attached to
NPS, BISC, VESSEL, OUTBOARD MOTORS, AND TRAILER
Solicitation number
140P5424Q0015
Issued by

About this file

Written by GovTribe AI ·

This document outlines specifications for a 30-foot vessel to be procured by the National Park Service under solicitation number 140P5424Q0015. Key requirements include a vessel between 29'6" and 30'6" in length with a beam between 9'6" and 10', draft of 19", and fuel capacity of minimum 265 gallons split between three tanks. The vessel must be constructed of fiberglass with foam core and vinyl ester resin and include hard top, trim tabs, navigation lights, bilge pumps, batteries, self-bailing cockpit, dive platform, and integrated electronics. An R30x trailer with LED lights, 6000lb axles, and 5-year warranty is also specified. The solicitation seeks to award a contract to provide the vessel, two 300HP outboard motors, trailer, and installation of Government Furnished Equipment including a GPS, radio, and lighting.

View the file

Other files

File Type Posted
Sol_140P5424Q0015.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Vessels Specifications

• Length of vessel Minimum 29’6”

• Max Length of Vessel 30’6”

• Minimum Beam 9’ 6”

• Maximum Beam 10’

• Maximum Draft 19”

• Fuel Capacity - Minimum 265 gallons

• Minimum three (3) fuel tanks: To include two saddle tanks and one center tank

(Port Tank Minimum 75 Gallons, Starboard Tank Minimum 75 Gallons, Center Tank Minimum 115 Gallons)

• Two 300 HP V8 Mercury Verados - Four Strokes

• T-Top, Hard Top -Fiberglass (Minimum 112” x 72”)

• Twin Stepped Hull Configuration with 24.5 Degree Transom Deadrise

• Cored laminated construction throughout entire boat

• Hand-Laid Fiberglass Throughout High Tech Construction Using Multi-Directional

Fabric & Foam Cored Solid Glass Stringer System

• High-Density Coosa Transom core

• 100% vinyl ester resin construction throughout vessel

• Minimum of four (4) full length, full height longitudinal stringers

• Deck must be bonded to hull structure with plexus methacrylate

• Laminated aluminum plates used for mounting hardware.

• Under-deck storage must be watertight

• Deck must be level

• Deck/Cockpit must be Non-Skid

• Walk-thru Transom Door w/ latch

• Recessed bow handrail

• Vessel Must have Foam Floatation

• Vessel must have Self-Bailing Cockpit

• Vessel must have integrated dive platform and a full transom

• Heavy Duty Rub rail (Black in color)

• Forward anchor locker with storage

• Choice of Hull & Deck Gel Coat Colors (to be determined by agency)

• Recessed Kiekhaefer 280’s Trim Tabs with electronic controls

• Entire vessel and all components fabricated in-house

• Minimum 10 year structural warranty of vessel

Mechanical/Electronical

• Recessed pop up LED Bow-light/ Navigation Light

• LED Anchor Light mounted on Hard T-top

• Waterproof Switches & Breaker Panel with Indicator Lights

• Minimum of Two (2) Rule 2000 GPH Bilge Pumps

• Minimum of Two (2) Rule Float Switches

• Minimum of three (3) Deka, group 27 batteries (2 - Cranking Batteries, 1 - All

Purpose Battery)

• Minimum of three (3) independent battery switches

• Minimum of three (3) Chart LED Lights installed in Hard T-Top

• Installation of eight (7) Boarding lights on Hard T-Top (specific location will be determined by agency)

• Uflex Electro-Hydraulic Power Steering Uflex (Compatible w/ Mercury Verados

300s)

• Digital Throttle System (DTS)

• Mercury Vessel Smart View Gauge

• Two (2) Stainless Steel Propellers

• Fusion Marine radio and marine speakers

• Installation of VHF Radio

• Installation of VHF Antenna

• Installation of Garmin Global Position Unit (GPS)

• Installation of Garmin Radome HD 18”

• Installation of Garmin Thru-Hull Transducer

• Installation of LED Police Light Bar

• Installation of Siren

• Installation of Whelen WPA Control Siren Box

• Installation of Police Radio (will be supplied by agency)

• Installation of Stryker LED Spot Light

• All electronic connections will be waterproof/marine rated heat shrink

Vessel Configuration/Console/Hardware

• Minimum of six stainless steel fixed 8” Cleats (Specific Location will be determined by agency)

• Stainless Steel Heavy Duty Recessed Bow Lifting Ring with Cleat (Pop-Up)

• Two (2) Stainless Steel Heavy Duty Stern Lifting Rings

• Center Console with side door access and lockable latch.

• Console must have flush floor with deck and a false floor installed inside of center console

• Console must have minimum 18” x 30” Recessed Electronics box that is lockable.

• Configuration of Electronics, switch panels, radios, etc. (will be determined by agency)

• Stainless Steel steering wheel with stainless steel knob

• Clear Plex-glass acrylic windshield (Minimum 21” High)

• Stainless steel hardware where applicable

• Leaning post with flip down foot step

Trailer

• R30x Trailer w/ 7 ½ x 32” l-beams, all stainless steel hardware.

• LED lights throughout entire trailer

• Minimum 6000lbs axles with 16” Radial Tires

• Minimum 5 Year Warranty on all axles.

• Lifetime Warranty on Structure.

Items supplied by NPS (to be installed by boat manufacturer)

• Garmin Global Position System (GPS)- 7612

• Garmin Radome HD 18

• Icom VHF Radio

• Stryker LED “GO Light” (Spot Light w/ wire remote for dash)

• (7) Rigid Industries LED Lighting (Boarding Lights)

• (1) Police Radio

• (1) Antenna for Police Radio

• (1) Thru Hull Transducer for Garmin

• Seaview Plate and Radar mount

• Whelen Light Bar

• Whelen WPA Siren Box

• Whelen Siren w/ bracket

File details come from the government source that posted it. Updated .