USP CAA Front Lobby Door Area Requested Specifications.docx
DOCX document 16 KB Posted
- Attached to
- USP Canaan Front Lobby Door Supply
- Solicitation number
- 15B21526PR000181
About this file
This is a technical specifications document for a front lobby door assembly required for USP Canaan, a federal penitentiary facility operated by the Department of Justice Bureau of Prisons. The specifications detail a three-section modular security door system with left, middle, and right sections designed for high-security applications.
The left and right sections each feature a 48" wide by 83-1/4" tall door fabricated from 12-gauge steel with a 32" by 26" security viewing panel (clear security-temp + poly Type SG4), four hinges, internal stiffeners, insulation, pull handle, door closer, 14-gauge stainless steel kick plate, door sweep, and weatherstripping. Each door accommodates a 10300E Solenoid Operated Electro-Mechanical Deadlatch (supplied by facility). The frames for these sections measure approximately 72" wide by 85-1/4" tall by 8" deep, fabricated from 10-gauge steel with welded 1" x 1" x 1/8" angles for durability, flat thresholds, removable access panels with insulation, and mounting holes for assembly. The middle section measures 59-1/4" wide by 85-1/4" tall by 8" deep, fabricated from 12-gauge steel with a welded exterior panel and removable interior steel plate for access. All three sections include transoms (framed areas above measuring approximately 72" or 59-1/4" wide by 44-3/4" tall) with welded exterior panels and removable interior panels secured with tamper-resistant security screws. All components will be powder coated with Zinc Rich Primer, include Grade 8 bolts for assembly, and feature insulation throughout. The system is designed to bolt together at the jambs with dimpled holes and removable panels to facilitate installation and maintenance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| USP Canaan Front Lobby Door Supply Q and A.docx | DOCX document | |
| Door Schematics.pdf | ||
| Front Lobby Entrance Area.jpg | JPG image | |
| CAA Front Lobby Door Supply SF-18.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Front Lobby Door Area Requested Specifications
Left Section Door: approximate dimensions: (48” wide x 83-1/4” height x 2” thick)
• Fabricated from 12-gauge steel.
• Viewing panel approximate dimensions: (32” wide x 26” height x 3/4” thick) o ¾” clear security-temp + poly Type SG4
• (4) Hinges
• Internal stiffeners.
• Door will be insulated.
• Door handing: LHR or Right-Hand Outswing
• (1) Pull handle on exterior side
• (1) Door closer
• (1) 14-gauge stainless steel kick plate: (45” wide x 45” height)
• (1) Door sweep.
• Rubber weather stripping: (1) 48” header, (2) 84” legs of frame
• *Rubber weather strips will be included, but not mounted.
• Will contain a lock catch to accommodate a 10300E Solenoid Operated Electro-Mechanical Deadlatch (facility will supply lock)
• Door will be powder coated Zinc Rich Primer.
Frame: approximate dimensions (72” wide x 85-1/4” height x 8” deep)
• Will be made from 10-gauge steel.
• Will contain a lock pocket for a 10300E Solenoid Operated ElectroMechanical Deadlatch (facility will supply lock)
• Will have dimpled holes along the jamb to bolt together with middle section.
• 1” x 1” x 1/8” angles will be welded along the frame for durability.
• Flat Threshold: ¼” high x 7” wide x 36” long.
• Viewing panel approximate dimensions: (18” wide x 42” height x 3/4” thick) o ¾” clear security-temp + poly Type SG4
• Under View Panel: removable panel approximately (18” wide x 41-1/2” height) to gain access to bolt installation along the jamb and ground.
• This area will be insulated.
• Grade 8 bolts will be included to bolt sections together.
• Frame will be powder coated Zinc Rich Primer.
Transom: Framed area above the door and frame. Will be welded to lower frame.
• Approximate dimensions: (72” wide x 44-3/4” height x 8” deep)
• On exterior side, panels will be welded to the frame
• On interior side, panels will be removable to gain access to mounting holes for installation.
• Areas will be insulated.
• All removable panels will use Tamper Resistant Security Screws.
• Transom will be powder coated Zinc Rich Primer.
Middle Section Frame: approximate dimensions: (59-1/4” wide x 85-1/4” height 8” deep)
• Fabricated from 12-gauge steel.
• On exterior side, panel will be welded to the frame
• On interior side, a (½” thick steel plate) will be removable to gain access to mounting holes for installation.
• Will have holes along the jamb to bolt together with left and right section.
• Areas will be insulated.
• Frame will be powder coated Zinc Rich Primer.
Transom: Framed area above the door and frame. Will be welded to lower frame.
• Approximate dimensions: (59-1/4” wide x 44-3/4” height x 8” deep)
• On exterior side, panels will be welded to the frame
• On interior side, panels will be removable to gain access to mounting holes for installation.
• Areas will be insulated.
• All removable panels will use Tamper Resistant Security Screws.
• Transom will be powder coated Zinc Rich Primer.
Right Section Door: approximate dimensions: (48” wide x 83-1/4” height x 2” thick)
• Fabricated from 12-gauge steel.
• Viewing panel approximate dimensions: (32” wide x 26” height x 3/4” thick) o ¾” clear security-temp + poly Type SG4
• (4) Hinges
• Internal stiffeners.
• Door will be insulated.
• Door handing: LHR or Right-Hand Outswing
• (1) Pull handle on exterior side
• (1) Door closer
• (1) 14-gauge stainless steel kick plate: (45” wide x 45” height)
• (1) Door sweep.
• Rubber weather stripping: (1) 48” header, (2) 84” legs of frame
• *Rubber weather strips will be included, but not mounted.
• Will contain a lock catch to accommodate a 10300E Solenoid Operated Electro-Mechanical Deadlatch (facility will supply lock)
• Door will be powder coated Zinc Rich Primer.
Frame: approximate dimensions (72” wide x 85-1/4” height x 8” deep)
• Will be made from 10-gauge steel.
• Will contain a lock pocket for a 10300E Solenoid Operated ElectroMechanical Deadlatch (facility will supply lock)
• Will have dimpled holes along the jamb to bolt together with middle section.
• 1” x 1” x 1/8” angles will be welded along the frame for durability.
• Flat Threshold: ¼” high x 7” wide x 36” long.
• Viewing panel approximate dimensions: (18” wide x 42” height x 3/4” thick) o ¾” clear security-temp + poly Type SG4
• Under View Panel: removable panel approximately (18” wide x 41-1/2” height) to gain access to bolt installation along the jamb and ground.
• This area will be insulated.
• Grade 8 bolts will be included to bolt sections together.
• Frame will be powder coated Zinc Rich Primer.
Transom (Framed area above the door and frame. Will be welded to lower frame)
• Approximate dimensions: (72” wide x 44-3/4” height x 8” deep)
• On exterior side, panels will be welded to the frame
• On interior side, panels will be removable to gain access to mounting holes for installation.
• Areas will be insulated.
• All removable panels will use Tamper Resistant Security Screws.
• Transom will be powder coated Zinc Rich Primer.
File details come from the government source that posted it. Updated .