USNS BURLINGTON- Sources Sought Notice.doc

THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation or request for quotes and no contract or purchase order will be awarded from this notice. There is no solicitation, specifications or drawings available at this time. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis.

Military Sealift Command is seeking eligible businesses for the Mid Term Availability (MTA) for the USNS BURLINGTON (T-EFP 10) commencing on or about November 01, 2022 for 66 calendar days. The USNS BURLINGTON (T-EPF 10) has a length of 337.9 ft., a Beam of 93.5 ft., a Draft of 12 ft. 8.5 in, and is 2,500 tons. Work to be performed at Contractor's facility on or about the above mentioned date. Area of consideration is East Coast/ Gulf Coast. Estimated issue date of this solicitation is on/about April 13, 2022. After issuance, solicitation may be obtained by accessing SAM.gov.

While the finalized list of work items are still under development, a list of the notional work package items is as follows:

· Flight Deck Preservation (3 YR)

· Clean Heat Exchangers

· Propulsion Line Shaft Bearing Inspection

· Waterjet Flexible Hydraulic and Lube Oil Hose Replacement Vacuum Sewage Collection System Maintenance

· Switchboard Cleaning

· Load Center Cleaning

· Annual Radar Service

· Annual ECDIS Service

· Annual GYRO Service

· Annual VDR Recertification

· Echo Sounder Serivce

· Reverse Osmosis Unit Maintenance

· Vacuum Sewage Collection System

· HEF Maintenance

· Gauge Calibration

· Fire Doors and Shutters

· Range Hood Fire Extinguishing System

· Marine Evacuation System

· Life Vest Serviving

· ESMF Install

· HVAC and Refrigeration System

· Shaft Aligment and Bearing Reaction

***NOTES OF CONSIDERATION***

Aluminum welding is a skill that requires specialized expertise that differs from traditional steel welding. The time period for this MTA can cross into the colder months of the year and span across several Federal Holidays. These could be potential areas of concern because the temperature affects the outcome of aluminum welding and the labor force could become greatly diminished over the holidays. The contractor needs to be able to provide ABS and approved material certs, ABS approved aluminum welder certs, and ABS approved aluminum welding procedures to MSC rep and ABS Surveyor. All welds shall include Non-destructive testing (NDT) to the satisfactory of the MSC rep and ABS surveyor. As a minimum, PT, UT, (where possible) and 5X visual shall be conducted on all welds. Contractor shall use protective enclosures for a moisture and draft free environment while welding. Pulse Gas Metal Arc Welding (GMAW) shall be used on repairs and install where deck plate is 6mm and below.

All Small businesses, Service-Disabled Veteran-Owned Small Business, Certified HUBZone and Certified 8(a) Small Businesses are encouraged to respond. The Government will determine whether a set-aside acquisition in lieu of full and open competition is in the Government’s best interest. This office anticipated award of a contract no later than 02 September 2022. The appropriate NAICS Code is 336611. THIS IS NOT A REQUEST FOR QUOTE OR PROPOSAL. It is a market research tool used to determine the availability and adequacy of potential small business sources prior to determining the method of acquisition and issuance of an award. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis.

It is requested that interested small businesses submit to the contracting office a brief capabilities package demonstrating ability to provide the requested items. This document shall address, as a minimum the following:

(1) Company Profile to include number of employees, office location(s), DUNS number, CAGE Code and a statement regarding small business designation and status;

(2) The facility where the work will be performed;

(3) Partnership, teaming, joint ventures, or mentor-protégé agreements with any large businesses.

Submission of a capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Government in tailoring requirement to be consistent with industry.

RESPONSES ARE DUE on Tuesday, April 05, 2022 by 12:00 PM Eastern Standard Time. Responses shall be sent via mail to the following address: Military Sealift Command, Code N104-B3 (attn: Jerica Bray; Alvinia Jenkins), 471 East C Street, Norfolk, VA 23511. Email submissions of the capabilities packages (jerica.e.bray.civ@us.navy.mil; alvinia.r.jenkins.civ@us.navy.mil) WILL be accepted. Fax submissions of the capabilities packages WILL NOT be accepted. Questions or comments regarding this notice may be addressed to Jerica Bray and/or Alvinia Jenkins at the above address or via email at jerica.e.bray.civ@us.navy.mil and/or alvinia.r.jenkins.civ@us.navy.mil.