KATHERINE WALKER DD FY20 - Sources Sought.doc
DOC document 42 KB Posted
- Solicitation number
- Not on record
About this file
This document is a sources sought notice for drydock repair work on the Coast Guard Cutter KATHERINE WALKER. There are approximately 54 work items in the requirement, including hull plating repairs and replacements, tank cleaning and inspection, engine and propulsion work, deck preservation, and temporary services. Interested parties should respond by December 2nd noting their business type and providing past performance references. The Coast Guard will then determine if the requirement will be set aside for small businesses such as HUBZone, Service-Disabled Veteran-Owned, or Women Owned Small Business concerns. A combined synopsis/solicitation will be posted on FBO.gov after the determination. The performance period is July 21st to September 30th 2020, with quotes requested by February 21st and contract award anticipated May 22nd. The NAICS code is 336611 and small business size standard is less than 1250 employees.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation Number: USCGC KATHERINE WALKER (WLM 552) Drydock (DD) Repair Availability Notice Type: Sources Sought
The U.S. Coast Guard is looking for sources which would be interested in performing Dry-Dock repairs for Coast Guard Cutter (CGC) KATHERINE WALKER (WLM 552).
The performance period of this upcoming DD is 21 July 2020 to 30 September 2020 It is anticipated requests for quotes will be issued approximately 21 February 2020 and the contract would be awarded around 22 May 2020.
CGC KATHERINE WALKER is a 175’Buoy Tender/Keeper home ported in Bayonne, NJ. 07002-1099. There are approximately 54 work items in the requirement and the sampling of work items (tentative list) to be performed are listed as follows:
WORK ITEM 1: Hull Plating (Side Scan), Ultrasonic Testing
WORK ITEM 2: Hull Plating (U/W Body), Inspect
WORK ITEM 3: Hull Plating (U/W Body), Ultrasonic Testing
WORK ITEM 4: U/W Body, Preserve (100%)
WORK ITEM 5: Hull Plating Freeboard, Preserve – Partial
WORK ITEM 6: Hull Plating Freeboard, Preserve “100%”
WORK ITEM 7: Hull and Structural Plating (General) -10.2-Pound Steel, Renew
WORK ITEM 8: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew
WORK ITEM 9: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew
WORK ITEM 10: Hull And Structural Plating (General) - 20.4-Pound Steel Plate, Renew
WORK ITEM 11: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew
WORK ITEM 12: Hull and Structural Plating (General) - 7.65- Pound Steel Plate, Renew
WORK ITEM 13: Hull and Structural Plating (General) - Cracked Steel Welds, Repairs
WORK ITEM 14: Appendages (U/W), Leak Test
WORK ITEM 15: Appendages (U/W) - Internal, Preserve
WORK ITEM 16: Chain Locker(s), Clean and Inspect
WORK ITEM 17: Tanks (Mp Fuel Stowage And Overflow), Clean and Inspect
WORK ITEM 18: Voids (Non-Accessible), Leak Test
WORK ITEM 19: Voids (Non-Accessible), Internal Surfaces, Preserve
WORK ITEM 20: Tanks (Mp Fuel Service), Clean and Inspect
WORK ITEM 21: Tanks (Ballast), Clean and Inspect
WORK ITEM 22: Tanks (Dirty Oil and Waste), Clean and Inspect
WORK ITEM 23: Both Main Diesel Engine Mounts, Renewal
WORK ITEM 24: Both Z-Drive Propulsion Trains, Alignment
WORK ITEM 25: Z-Drive Propulsion Units, Overhaul
WORK ITEM 26: Z-Drive Propulsion Unit, Renew (Drydock)
WORK ITEM 27: Z-Drive Input Drive Shaft, Thrust Bearing Renewal
WORK ITEM 28: Sw Heat Exchangers; Clean, Inspect and Hydro
WORK ITEM 29: Fathometer Transducer, General Maintenance
WORK ITEM 30: Underwater (Speed) Log Transducer(s), Renew
WORK ITEM 31: Sea Valves and Waster Pieces, Overhaul or Renew
WORK ITEM 32: Sea Strainers (All Sizes), Renew
WORK ITEM 33: Sea Strainers - Duplex (All Sizes), Overhaul
WORK ITEM 34: Sea Bay, Preserve - Partial
WORK ITEM 35: Sea Bay, Clean and Inspect
WORK ITEM 36: Sea Bay, Preserve 100%
WORK ITEM 37: Thruster Unit (General), Overhaul
WORK ITEM 38: Anchor Windlass, Inspect and Service
WORK ITEM 39: Anchor Chain(s) and Ground Tackle, Inspect and Repair
WORK ITEM 40: Anchor Chain and Ground Tackle, Preserve
WORK ITEM 41: Anchor(s), Preserve
WORK ITEM 42: Hawse Pipes, Preserve
WORK ITEM 43: Chain Locker, Preserve 100%
WORK ITEM 44: Chain Lockers, Preserve – Partial
WORK ITEM 45: Tanks (Dirty Oil and Waste), Preserve “100%”
WORK ITEM 46: Tanks (Dirty Oil and Waste), Preserve “Partial”
WORK ITEM 47: Decks – Exterior (Buoy or Construction Deck), Preserve 100%
WORK ITEM 48: Hull Plating Freeboard (Buoy Port Areas), Preserve
WORK ITEM 49: Superstructure, Preserve “100%”
WORK ITEM 50: Superstructure, Preserve “Partial”
WORK ITEM 51: Cathodic Protection / Zinc Anodes, Renew
WORK ITEM 52: Drydock
WORK ITEM 53: Temporary Services, Provide - Cutter
WORK ITEM 54: Sea Trial Performance, Support, Provide
GEOGRAPHICAL RESTRICTION MAY OR MAY NOT BE RESTRICTED
Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc…. Further if there are no past performance evaluations on file in the Past Performance Information System Retrieval database, contractors should provide a couple past performance references including the following information: contract numbers, project titles, dollar amounts, points of contact and telephone numbers.
Replies should be sent by 2 December 2019, 2:00 pm Eastern Standard Time to: Patrick.D.Brown@uscg.mil
Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website (https://www.fbo.gov/).
The NAICS Code is 336611. The small business size standard is less than 1250 employees.
Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Service-Disabled Veteran-Owned Small Business Set-Aside" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service disabled veteran owned small businesses.
Additionally, regarding FAR 52.219-30 "Notice of Set A-Side For Women-Owned Small Business Concerns…": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.
Primary Point of Contact:
Patrick Brown, Patrick.D.Brown@uscg.mil
Phone: (757) 628-4588
File details come from the government source that posted it. Updated .