Updated SPECIFICATIONS SHEET-FY26 18 EOD COMMUNICATION ASSEMBLIES.pdf

1 | P a g e

SPECIFICATIONS SHEET 18 EOD COMTAC VI HEADSETS AND DOWNLEADS

1. INTRODUCTION

2. Purchase and Deliver COMTAC Headsets

3. Purchase and Deliver Dual Comm PTT Assemblies

4. Purchase and Deliver Dual Comm PTT Downlead Assemblies

5. Purchase and Deliver 6 Pin Radio Connector Assemblies

6. EQUIPMENT DELIVERY AND WARRANTY

7. DESTINATION

8. POINTS OF CONTACT

2 | P a g e

SPECIFICATIONS SHEET

1. INTRODUCTION

a. The primary mission of the 18th EOD unit is to directly provide mission critical support to the 18th Wg and 1st Island Chain. 18th EOD function is to safely dispose of explosive hazards, clear aircraft hazards, clear aircraft bombing ranges In Support Of (ISO) 18th Wg and host unit sortie generation, respond on and off Kadena AB ISO the 18th Wg and ODB to mitigate UXO hazards, provide training to host nation and sister service to build competency and allyship. This is accomplished through rigorous planning, training and communication integration with all parties involved. The purpose of this contract is to acquire communication assets that meet the training and operational needs of 18th EOD to accomplish their mission. The 18th EOD’s mission set requires reliable communication across multiple platforms and frequencies. HAF directive for communication devices currently utilize PRC-163, PRC-152, PRC-117G, and ATAK platforms. These platforms all run multiple channels, often times requiring the end user (18th EOD in this case), to be able to monitor and transmit. The requirements below allow 18th EOD end users to fully utilize HAF mandated communications platforms as intended. Without this equipment, 18th EOD is unable to communicate across platforms and frequencies, creating major limiting factors (LIMFACS) for operational and training missions.

b. This requirement is for the purchase and delivery of communications equipment as listed below to 18th EOD Unit.

2. Purchase and Deliver COMTAC VI Headsets

a. New Equipment ONLY; 3M manufactured, NO remanufactured or “gray market” items.

b. Contractor shall purchase and deliver twenty-one COMTAC VI Headsets with the following:

3 | P a g e

1) Salient Characteristics

a) Headset, 3M Made

b) Mission-specific auditory awareness settings (MAP)

c) Adjustable-length noise-cancelling boom microphone

d) Built-in wireless intercom communications, supporting at least 4 team members speaking simultaneously and 60+ listeners within a 30 ft radius

e) 5-conductor (TP-105) downlead cable that supports multiple push to talk (PTT) options

f) Level-dependent digital audio protection

g) Automatic noise compression for impulse/steady-state sounds

h) Amplification of weak ambient sounds to maintain full environmental awareness

i) Attenuation rating – 20dB, 21dB, 22dB, 23dB

j) Battery life – Approx. 30 hours

k) Battery type – Disposable AAA, rechargeable AAA

l) Number of leads – 1

m) Plug type – TP-105

3. Purchase and Deliver ARIES Dual Communications PTT Assemblies

a. New Equipment ONLY; NO remanufactured or “gray market” items.

b. Contractor shall purchase and deliver twenty-one Dual Communications (PTT) Assemblies with the following:

1) Salient Characteristics:

a. Comm Ports: x2 ODU Size 0HD Blue Jack (Push-Pull/Screw-Lock)

b. Headset Port: x1 ODU Size 0HD Red Jack (Push-Pull/Screw-Lock)

c. Switches: x2 DPDT Shrouded Switch

d. Channels: x3 Comm Channels

e. Cable Ratings: Temp: -40 degrees Celsius to 90 degrees Celsius

Voltage: 30V

f. Outer Jacket: Polyurethane: Flame Retardant, Black (matte)

g. Overmold Material: TPE Black (matte)

h. ECCN: 5A991

i. Cable Lengths: x2 3.50” Leads

j. PTT Dimensions: 2.63” x 1.80” x .930”

k. Immersion Rating: 4.5v Min – 36v Max

l. RF Immunity Level: High

m. Cross Talk Immunity Level: High

n. Compatible with - Standard & Dual Net Radios

- 21GC Series Cables

o. Compatible Headsets: - Comtac VI GC Series (3M)

- Revolution X

4. Purchase and Deliver ARIES Dual Communications PTT Downlead Assemblies

4 | P a g e

b. Contractor shall purchase and deliver twenty-one Dual Communications (PTT) Downlead

Assemblies with the following:

a. Connector type: x1 ODU Size 0HD Blue Plug (Push-Pull/Screw-Lock), x1 ODU 0HD Tan Jack (Break Away), x1 19C Nemesis (PRC-163)

b. Cable Ratings: Temp: -40 degress to 90 degrees Celsius

c. Outer Jacket: Polyurethane; Flame retardant, Black (matte), EUD: TPE Black

d. Overmold Material: TPE Black (matte)

e. Immersion Rating: 10m/10hrs

f. Length: Rad: 27.00” EUD: 8.00”

g. Weight 4 Ounces

h. ECCN: 5A991

5. Purchase and Deliver 21GC SERIES: PRC-163 / RF-9820S / 148E SPEAR

(W/ EUD) 27" LEAD 6 Pin Radio Connector Assemblies

b. Contractor shall purchase and deliver twenty-one 6 Pin Radio Connector Assemblies with the following:

a. Connector type: x1 ODU Size 0 HD AMC (Blue), x1 6 Pin Radio Connector

b. Length: 27”

6. Equipment Delivery and Warranty

a. For the Contractor to successfully handoff the specified piece of equipment and receive payment from the United States Government (USG), they shall:

1) Deliver items to Shipping Address: 18 CES/CED

OPC 80 Box 5201

APO, AP

96367-5201.

b. This equipment shall come with the manufacturer’s standard equipment warranty.

c. Delivery Address: 18 CES/CED

OPC 80 BOX 5201

APO, AP

96367-5201

Or DLA Consolidation Point Tracy California

5 | P a g e