Updated_Build_Scope_of_Work_and_Specifications.pdf

Build Scope of Work and Specifications:

Customer: Everglades National Park 33100 Tamiami Trail East Ochopee, FL 34141

Please include delivery in your quote. If location is within 300 miles of delivery address, park reserves the option to pick up the vessel to save on costs.

Vessel/Hull Specifications

• Length: 21’

• Beam: 7’9”

• Hull Dry Weight: NTE 950lbs

• Draft: 10”

• 12 to 15 deg deadrise

• Fuel Capacity: 60 gallons or greater.

• Outboard HP: Rated at minimum to accept a 300hp (Customer Supplied)

• Hull Material Composite construction

• Hull Color: White

• Rub Rail Color: Black

• Upholstery Color White

• Vee-hull, Flats Boat Design

• Forward and Rearward Decks o Forward Anchor Locker o Forward Dry Storage separate of Anchor Locker o Rear Deck Storage, with hatch access o Self-Bailing Hatches

• Console mounted aft, to utilize the rear deck area as a seat/platform/or leaning post o Helm Seat or Helm Pad Removable o Console has recessed toe kick

• Self-Bailing Deck and cockpit

• Powder coated or stainless grab rails.

• Stainless steel hardware to include all hinges, fasteners, and rigging.

• Stainless Steel Steering with Tilt o Hydraulic Steering

• Large Heavy Duty Rub Rails

• Dual Battery (House/Starter) wired on a dual battery switch.

• Non-Skid texture covered decking.

• Fitted Covers, Console Cover, Seat Cover (if seat isn’t removable) and Engine Cover

• Live Well Hoses/Pumps/Through Hull Fittings Deleted.

• Storage Compartment Water Drains o Storage Lay Out:

Anchor Locker at the foremost area of the bow Large Storage Compartment on the bow deck, aft of the anchor Locker Large, hatched storage areas on the port and starboard gunnels Two Large storage Hatches on the Port and Starboard rear deck, with a storage w/hatch in between them.

Aft Deck has a large hatch for accessing the build area and maintenance.

• All cleats must allow for a smooth deck surface when not being utilized. IE: Pop-up or Fold Style Cleats.

o Two Cleats installed aft, Port and Starboard o Two Cleats installed midship, Port and Starboard o One or Two Cleats installed Forward, Center or Port and Starboard.

• 1 Bow Eye and 2 Stern eyelets

• Drain Plug

• Availability Accommodation for warranty work, within 300 Miles of the end user. ENP

Electronics/Accessories/Add-ons

• 10” Garmin GPS/Map o Main GPS/Chart Plotter is to be Installed flush into the helm/center console.

o GPS is to be wired and meshed in a network to accurately provide.

GPS location Updated marine charts for South Florida Atlantic and Gulf Coast waters.

Communicate and display Fuel and Engine Data Wired and updated to provide GPS/Weather data overlay.

• Nav Lights and AUX Lights o Shark Eye style navigation lights, mounted forward on the boat and under the rub rail to reduce night glare

• VHF Garmin Marine Radio with VHF Antenna. Flush mounted or mounted under/in console with easy access to controls.

• Marine Breaker switches inline of : (Jack-plate, trim/tilt, Trim Tabs,) wiring

• Blade Fuse/buss Terminal used to centralize all other electronics.

• Dual Bilge Pump, Wired on automatic float switch Min 1000gph each

• Compartment light LEDs

• Cockpit Light LED

• Lights, Bilge, ACC switch on console

Motor/Engine Configuration

• Must Mount Customer Supplied Outboard: Mercury Marine 300HP Four Stroke o Must accept customer supplied delivery of the outboard within a 300 miles of the

Everglades National Park o Not Customer Supplied: Must be supplied by vender.

Binnacle style controls, wiring harness and switch for trim/tilt

• Four-Blade Stainless steel performance prop o Spare Stainless-steel prop

• Fly-by-wire throttle/controls

• Trim/tilt

• Min 6” Hydraulic Jack-Plate (Hydraulic Jack-Plate will have an inline breaker installed at the source) Jack Plate Controls will be wired/mounted under the steering-wheel along the steering collum

• Trim-Tabs with Trim tab controls wired to console.

• Power Poles (2 each) 6’ Max 4’ Minimum Hydraulic/Electric Powered Shallow water

Anchor/Powered Anchor Pole (utilizing a side-mounted engine bracket or Jack Plate Bracket port and starboard)

• Inline fuel filter/canister

• Digital Gauge

Trailer Configuration

• Aluminum Trailer, with Torson Axles, stainless steel Hardware, Retractable Transom Tie-down straps, Spare wheel/Tire

Vessel Hull Configuration Examples:

Interior Layout: Overhead View