Truck_Side_Guard_Ordinance.pdf

PDF 4 MB Posted

Attached to
SLE - STEEL FRAMES and COVERS
Solicitation number
EV00018113
Issued by
Suffolk County, Massachusetts

About this file

This document is the Truck Side Guard Ordinance adopted by the City of Boston, Massachusetts, establishing mandatory safety requirements for large commercial vehicles operating within city jurisdiction. The ordinance applies to motor vehicles weighing over 10,000 pounds and semi-trailers exceeding 26,000 pounds that contract with City agencies, requiring vendors to install side guards, convex mirrors, cross-over mirrors, and blind-spot awareness decals. The ordinance became effective for all contracts commencing on or after May 5, 2015, and vendors must obtain inspection and permit approval before commencing work. The ordinance does not apply to agricultural trailers, fire engines, and vehicles used exclusively for snow removal. Side guards must be rigid and securely mounted without increasing vehicle width, with specific dimensional requirements including a maximum height of 21.5 inches above ground and a maximum depth of 14 inches below the vehicle structure.

The ordinance specifies detailed technical requirements for all safety devices, including mirror placement allowing visibility of objects three feet above ground and safety decals in high-visibility yellow positioned in vehicle blind spots. The average cost of side guard installation is approximately $847 nationally, with Boston's pilot program achieving installation at $1,200 per truck. Multiple manufacturers supply compliant products, including Airflow Deflector, J.C. Madigan Inc., and Susi Auto Body. Subcontractors regularly working on City jobs must comply with inspection and permitting requirements, though vendors making one-time material deliveries are exempt. The City offers off-site inspections for larger fleets depending on inspector availability and distance.

View the file

Other files

File Type Posted
EV00018113__Terms_and_Conditions.pdf PDF
SLE_-_STEEL_FRAMES_and_COVERS.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

As the first of its kind in the nation, the Truck Side Guard ordinance championed by Mayor Walsh applies to motor vehicles weighing over 10,000 lbs. and semi-trailers with a total weight exceeding 26,000 lbs. The ordinance requires City agencies to contract only with vendors that have properly installed the following: side guards, convex mirrors, cross-over mirrors, and blind-spot awareness decals. These features are intended to reduce the risk of unprotected road users from falling under the sides of vehicles and getting caught under the rear wheels. The ordinance does not apply to several types of large vehicles, such as agricultural trailers, fire engines, and trucks used exclusively for snow removal.

TRUCK SIDE GUARD ORDINANCE

LATERAL PROTECTION (Side Guards) Device must not increase the width of the vehicle.

Device is rigid and securely mounted.

CONVEX MIRRORS

Objects can be seen down the full length of the vehicle.

Objects can be seen 3’ above the ground.

CROSS-OVER MIRRORS

Objects can be seen 3’ above the ground, from the bumper to where direct vision is possible.

SAFETY DECALS

“Safety yellow” in color or bright.

Minimum of 3 located in vehicle blind spots on side and the rear.

Vehicles designed in a manner that protects against lateral accidents, by virtue of their shape and characteristics, may satisfy the above requirements.

SUMMARY

REQUIREMENTS

COSTS, APPLICATION

Studies by the U.S. Dept. of Transportation have determined the cost of sideguards to be an average of $847. *They are typically installed as a bolt-on addition and can be fixed or hinged.

Mercedes and Volvo have produced side guard models.

*In the City of Boston pilot, each truck was outfitted for $1,200.

Lowest edge of is maximum 21.5” above the ground.

Upper edge is maximum 14” below structure of vehicle.

DIMENSION REQUIREMENTS FOR SIDE GUARDS

TRUCK SIDE GUARD ORDINANCE

max. 21.5” above ground max. 14” below structure of vehicle

SIDE GUARD

12” max.

5” m ax.

SI

D

E

VI

EW

TO

P

VI

EW

Not over 5” inboard of maximum width of vehicle.

Not over 12” from outer part of front and rear tire.

FRONT

SAMPLE OF GUARDS FROM BOSTON’S PILOT

What types of vehicles does this ordinance apply to? This ordinance applies to large vehicles (over 10,000lbs) and semi-trailers used by City of Boston vendors within the City of Boston

Do I need an inspection before I start work on a contract? Yes

When does the ordinance go into effect? All contracts starting on or after May 5, 2015 must comply

Can tool boxes work as guards? Yes, but the tool box must meet all the required measurements in the ordinance

Do subcontractors with trucks regularly working on a job need to be inspected and permitted? Yes

What about deliveries to a job site? The City does not view a subcontractor that simply delivers materials or goods to a job site or to a City Department to be a “Vendor” subject to the ordinance.”

If I typically rent trucks for a job, do those need to be inspected and permitted? Yes

Will the City do an off-site inspection for larger fleets? Yes, depending upon availability of inspectors and distance. Call the number below.

Common Questions

AIRFLOW DEFLECTOR

made by Airflow Deflector www.deflecteurairflow.com/ sideguardprotection

CUSTOM ‘RAIL’ STYLE

made by J.C. Madigan Inc.

www.jcmadigan.com

CUSTOM ‘GRILL’ STYLE

made by Susi Auto Body www.susiautobody.com

Cross Over Mirror

Cross Over Mirrors Help drivers see objects in the front blindspot of large trucks

Photo Credit: NYCDOT

Photo Credit: Jim O’Grady, WNYC

CALL TO SCHEDULE AN INSPECTION

http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com

File details come from the government source that posted it. Updated .