Truck_Side_Guard_Ordinance.pdf

PDF 4 MB Posted

Attached to
One-Ton Heavy Duty Pickup (BFD)
Solicitation number
EV00018114
Issued by
Suffolk County, Massachusetts

About this file

This file is a Truck Side Guard Ordinance document issued by the City of Boston that establishes mandatory safety equipment requirements for large vehicles operating within the city. The ordinance applies to motor vehicles weighing over 10,000 pounds and semi-trailers exceeding 26,000 pounds, but excludes agricultural trailers, fire engines, and snow removal trucks. All City of Boston vendors contracting with city agencies must equip their vehicles with properly installed side guards, convex mirrors, cross-over mirrors, and blind-spot awareness safety decals before commencing work on contracts dated on or after May 5, 2015. The ordinance does not apply to vendors making one-time material deliveries to job sites or city departments. Vendors are required to obtain inspections and permits for compliance, with the city offering off-site inspections for larger fleets depending on inspector availability and distance.

The side guards, which cost an average of $847 according to U.S. Department of Transportation studies and approximately $1,200 per vehicle in Boston's pilot program, must meet specific dimensional requirements: maximum 21.5 inches above ground and maximum 14 inches below the vehicle structure. Convex mirrors and cross-over mirrors must provide visibility of objects at least 3 feet above ground along the full vehicle length. Safety decals must be safety yellow or bright in color with a minimum of three decals placed in vehicle blind spots on the sides and rear. Approved vendors for side guard installation include Airflow Deflector, J.C. Madigan Inc., and Susi Auto Body. Tool boxes may serve as guards provided they meet all specified measurements. Subcontractors operating trucks regularly on job sites must also comply with inspection and permitting requirements.

View the file

Other files

File Type Posted
One-Ton_Heavy_Duty_Pickup_(BFD).pdf PDF
EV00018114__Terms_and_Conditions.pdf PDF
EV00018114_Compliance.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

As the first of its kind in the nation, the Truck Side Guard ordinance championed by Mayor Walsh applies to motor vehicles weighing over 10,000 lbs. and semi-trailers with a total weight exceeding 26,000 lbs. The ordinance requires City agencies to contract only with vendors that have properly installed the following: side guards, convex mirrors, cross-over mirrors, and blind-spot awareness decals. These features are intended to reduce the risk of unprotected road users from falling under the sides of vehicles and getting caught under the rear wheels. The ordinance does not apply to several types of large vehicles, such as agricultural trailers, fire engines, and trucks used exclusively for snow removal.

TRUCK SIDE GUARD ORDINANCE

LATERAL PROTECTION (Side Guards) Device must not increase the width of the vehicle.

Device is rigid and securely mounted.

CONVEX MIRRORS

Objects can be seen down the full length of the vehicle.

Objects can be seen 3’ above the ground.

CROSS-OVER MIRRORS

Objects can be seen 3’ above the ground, from the bumper to where direct vision is possible.

SAFETY DECALS

“Safety yellow” in color or bright.

Minimum of 3 located in vehicle blind spots on side and the rear.

Vehicles designed in a manner that protects against lateral accidents, by virtue of their shape and characteristics, may satisfy the above requirements.

SUMMARY

REQUIREMENTS

COSTS, APPLICATION

Studies by the U.S. Dept. of Transportation have determined the cost of sideguards to be an average of $847. *They are typically installed as a bolt-on addition and can be fixed or hinged.

Mercedes and Volvo have produced side guard models.

*In the City of Boston pilot, each truck was outfitted for $1,200.

Lowest edge of is maximum 21.5” above the ground.

Upper edge is maximum 14” below structure of vehicle.

DIMENSION REQUIREMENTS FOR SIDE GUARDS

TRUCK SIDE GUARD ORDINANCE

max. 21.5” above ground max. 14” below structure of vehicle

SIDE GUARD

12” max.

5” m ax.

SI

D

E

VI

EW

TO

P

VI

EW

Not over 5” inboard of maximum width of vehicle.

Not over 12” from outer part of front and rear tire.

FRONT

SAMPLE OF GUARDS FROM BOSTON’S PILOT

What types of vehicles does this ordinance apply to? This ordinance applies to large vehicles (over 10,000lbs) and semi-trailers used by City of Boston vendors within the City of Boston

Do I need an inspection before I start work on a contract? Yes

When does the ordinance go into effect? All contracts starting on or after May 5, 2015 must comply

Can tool boxes work as guards? Yes, but the tool box must meet all the required measurements in the ordinance

Do subcontractors with trucks regularly working on a job need to be inspected and permitted? Yes

What about deliveries to a job site? The City does not view a subcontractor that simply delivers materials or goods to a job site or to a City Department to be a “Vendor” subject to the ordinance.”

If I typically rent trucks for a job, do those need to be inspected and permitted? Yes

Will the City do an off-site inspection for larger fleets? Yes, depending upon availability of inspectors and distance. Call the number below.

Common Questions

AIRFLOW DEFLECTOR

made by Airflow Deflector www.deflecteurairflow.com/ sideguardprotection

CUSTOM ‘RAIL’ STYLE

made by J.C. Madigan Inc.

www.jcmadigan.com

CUSTOM ‘GRILL’ STYLE

made by Susi Auto Body www.susiautobody.com

Cross Over Mirror

Cross Over Mirrors Help drivers see objects in the front blindspot of large trucks

Photo Credit: NYCDOT

Photo Credit: Jim O’Grady, WNYC

CALL TO SCHEDULE AN INSPECTION

http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com

File details come from the government source that posted it. Updated .