TRD.pdf

This is a Technical Requirements Document issued by the Department of the Air Force, Headquarters 96th Test Wing (AFMC) at Eglin Air Force Base, Florida, dated 7 May 2026.

The memorandum specifies requirements to purchase four Vitec TNP-100 Multiplexer units from VITEC with associated components and capabilities. The primary equipment (PN: 17893-us, TNP-100 – PCM Telemetry & IRIG IP Multiplexer and PN: 17901, Single Rack Mount Kit) must include: a multi-function interface with four multi-service ports; BNC connector with 75-ohm impedance; E1/T1 telecom connectivity with BNC and RJ45 connectors; digital data acquisition format support (TTL, ECL, CML) with 80 b/s to 50 Mb/s per port data rates; IRIG timing in analog format (1, 10 & 100 Khz) with specified signal levels and impedances; analog data acquisition and video capability supporting baseband signals up to 10 MHz bandwidth and video rates of 10 Mb/s to 400 Mb/s; signal processing with latency below 2mS; professional AES/EBU audio support; web-based GUI and SNMPv2/v3 remote management; one pluggable SFP module for Ethernet service ports with dual RJ45 10/100/1000Base-T connectivity; onboard BERT generator for remote testing; and 1RU physical dimensions (1.77" x 8.50" x 12.00"). Environmental specifications require operation from 0 to 50°C with 5% to 90% non-condensing relative humidity and storage from -40 to 70°C. Power consumption must not exceed 20W at 100–240V AC (47–63Hz). Delivery is required within 60 days after receipt of order (ARO).