Transition panel Specification Sheet (1).pdf

This is a technical specification drawing for a panel assembly component. The document provides detailed dimensional and material specifications for a panel that measures overall with length dimensions of approximately 24 inches and width of 3/4 inches. The panel features two primary material layers: a red-colored skin labeled "Skin - NOTE 1" and a blue core layer designated "Skin - NOTE 2," with a honeycomb core material shown in the cross-section labeled "Honeycomb Core - NOTE 3."

Key specifications include tolerance requirements of ±1/8 inch length dimensions and ±1/2 inch overall length tolerances. The panel requires external shims and slims to be adhesively bonded with film adhesive equivalent to BMS-5-154 IY2 CLI GRS. Critical design features include a transition area only required on two edges of the panel and specification sheet drawing requirements for all design details. The core material type is identified as 5-1/8" x 001" N 5056, and the document references core sandwich construction per MIL-C-7438G. Additional notes indicate this is a "Top Skin" specification with reference designations NSN 9330-01-672-277, NSN 9353-01-116-2277, and NSN 9353-00-167-2277, with a bottom skin designation 2024-T3 NSN 9353-00-167-2277.