Total_Scoring_and_Recap_21-020_Revised_(009).xlsx

Sheet2

Combined Scopes

Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services

Arcadis General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

` Geotechnical Engineering (Category 5) A. Geotechnical Engineering services to include:

1. Roadway Pavement Analysis and Design, Structural Number, Asphalt and Base Thickness Borings

2. Conducting Laboratory Testing for Soil Analyses, Proctors for Base Material, LBR and FL Bearing Values, Concrete Testing and Mix Design

3. Review and Provide Report Recommendations of Sinkhole Remediation Permit Submittals

4. Foundation Recommendations

5. Standard Penetration Testing, Natural and Seasonal High Water Table Reports

6. Percolation Tests

7. Borings and Soil Classifications B. Construction Density Testing and Inspections C. Miscellaneous Geotechnical Engineering Services Geotechnical Engineering (Category 5) A. Geotechnical Engineering services to include:

1. Roadway Pavement Analysis and Design, Structural Number, Asphalt and Base Thickness Borings

2. Conducting Laboratory Testing for Soil Analyses, Proctors for Base Material, LBR and FL Bearing Values, Concrete Testing and Mix Design

3. Review and Provide Report Recommendations of Sinkhole Remediation Permit Submittals

4. Foundation Recommendations

5. Standard Penetration Testing, Natural and Seasonal High Water Table Reports

6. Percolation Tests

7. Borings and Soil Classifications B. Construction Density Testing and Inspections C. Miscellaneous Geotechnical Engineering Services

Ardurra General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Arehna Geotechnical Engineering (Category 5) A. Geotechnical Engineering services to include:

1. Roadway Pavement Analysis and Design, Structural Number, Asphalt and Base Thickness Borings

2. Conducting Laboratory Testing for Soil Analyses, Proctors for Base Material, LBR and FL Bearing Values, Concrete Testing and Mix Design

3. Review and Provide Report Recommendations of Sinkhole Remediation Permit Submittals

4. Foundation Recommendations

5. Standard Penetration Testing, Natural and Seasonal High Water Table Reports

6. Percolation Tests

7. Borings and Soil Classifications B. Construction Density Testing and Inspections C. Miscellaneous Geotechnical Engineering Services Geotechnical Engineering (Category 5) A. Geotechnical Engineering services to include:

1. Roadway Pavement Analysis and Design, Structural Number, Asphalt and Base Thickness Borings

2. Conducting Laboratory Testing for Soil Analyses, Proctors for Base Material, LBR and FL Bearing Values, Concrete Testing and Mix Design

3. Review and Provide Report Recommendations of Sinkhole Remediation Permit Submittals

4. Foundation Recommendations

5. Standard Penetration Testing, Natural and Seasonal High Water Table Reports

6. Percolation Tests

7. Borings and Soil Classifications B. Construction Density Testing and Inspections C. Miscellaneous Geotechnical Engineering Services

Atkins General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services

Black and Veatch Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Burgess and Niple General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services

Cardno General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Environmental Engineering (Category 3) Environmental & Site Remediation Assessment Soil Testing Groundwater and Surface Water Testing Phase I Environmental Assessment Reports Phase II Environmental Assessment Reports EPC Conditional No Further Action Proposals (CNFAP) EPA Brownfield Grant Preparation Asbestos Surveys Wetland Delineation Surveys and Permits General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Environmental Engineering (Category 3) Environmental & Site Remediation Assessment Soil Testing Groundwater and Surface Water Testing Phase I Environmental Assessment Reports Phase II Environmental Assessment Reports EPC Conditional No Further Action Proposals (CNFAP) EPA Brownfield Grant Preparation Asbestos Surveys Wetland Delineation Surveys and Permits

Carollo Engineers Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Chastain Skillman General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services

CivilSurv General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services

Dewberry General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Sub-Surface Utility Engineering (Category 7) Consultant should be able to provide the following services:

1. Use of ground penetrating radar (GPR) system and interpretation for design

2. Record research and data collection (Quality Level D)

3. Visual Sights surveys (Quality Level C)

4. Utility designation, locating, and mapping (Quality Level B)

5. Test hole/pot holing (Quality Level A)

6. Ability to provide results on state plane coordinates (GIS, CADD & PDF formats) *Drawings for engineering design prepared by a Florida P.S.M.

*All SUE services need to comply with ASCEs Standard Guidelines Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Stormwater Engineering (Category 4) Stormwater System Design and Permitting Preparation of Grant Applications Project Management with Federal, State and Local Grants Watershed and Basin Modeling Stormwater Drainage/Maintenance Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Sub-Surface Utility Engineering (Category 7) Consultant should be able to provide the following services:

1. Use of ground penetrating radar (GPR) system and interpretation for design

2. Record research and data collection (Quality Level D)

3. Visual Sights surveys (Quality Level C)

4. Utility designation, locating, and mapping (Quality Level B)

5. Test hole/pot holing (Quality Level A)

6. Ability to provide results on state plane coordinates (GIS, CADD & PDF formats) *Drawings for engineering design prepared by a Florida P.S.M.

*All SUE services need to comply with ASCEs Standard Guidelines Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services

DRMP Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI)

Florida Transportation Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI) Transportation Engineering (Category 2) Roadway Design Traffic Studies Project Development and Environmental (PD&E) Studies Preparation of State Grant Applications Project Management with Federal, State and Local Grants Surveys Geotechnical Investigations Roadway Construction Engineering & Inspection (CEI)

George F Young Sub-Surface Utility Engineering (Category 7) Consultant should be able to provide the following services:

1. Use of ground penetrating radar (GPR) system and interpretation for design

2. Record research and data collection (Quality Level D)

3. Visual Sights surveys (Quality Level C)

4. Utility designation, locating, and mapping (Quality Level B)

5. Test hole/pot holing (Quality Level A)

6. Ability to provide results on state plane coordinates (GIS, CADD & PDF formats) *Drawings for engineering design prepared by a Florida P.S.M.

*All SUE services need to comply with ASCEs Standard Guidelines Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services Sub-Surface Utility Engineering (Category 7) Consultant should be able to provide the following services:

1. Use of ground penetrating radar (GPR) system and interpretation for design

2. Record research and data collection (Quality Level D)

3. Visual Sights surveys (Quality Level C)

4. Utility designation, locating, and mapping (Quality Level B)

5. Test hole/pot holing (Quality Level A)

6. Ability to provide results on state plane coordinates (GIS, CADD & PDF formats) *Drawings for engineering design prepared by a Florida P.S.M.

*All SUE services need to comply with ASCEs Standard Guidelines Registered Surveying and Mapping (Category 10) A. Land Surveying and Mapping services for the following:

1. Buildings

2. Parks

3. Roadways and Right-of-Ways

4. Site Topographic Surveys

5. Drainage Ditches and Canals, Inlets and Pipe, Ponds

6. Plat Preparation and Review

7. As-Built Surveys

8. Boundary Surveys and Special Purpose Surveys B. Construction stake-out and grade control C. GPS (Global Positioning System) mapping, platting, and drafting D. Miscellaneous Surveying and Mapping services

Griner Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Halff Associates General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services General Engineering (Category 1) Roadway Design (small projects) Site Design Stormwater Design (small projects) Utility Infrastructure Design Hydraulic Modeling Surveys Geotechnical Investigations Project Management Construction Engineering & Inspection (CEI) Services

Hazen Sawyer Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding coordination) *All design services signed and sealed by a Florida P.E.

Instrumentation and Controls Engineering (Category 8)

1. Design of fiber optic installation and repair

2. Design of Variable Frequency Drive (VFD) installation and repair

3. PLC programming and troubleshooting services

4. Integrating SCADA with new lift stations/water wells

5. Wireless control systems design

6. SCADA Design

7. Reliability review of existing or proposed systems *Florida P.E. not required Electrical Engineering (Category 9)

1. Light replacement on light poles

2. Point repairs for high voltage poles (example: fusing a link on a pole)

3. Engineering for general electric maintenance

4. Electrical engineering for facility upgrades within CCNA

5. Arch flash protection analysis

6. Permitting

7. Construction Inspection *All design services signed and sealed by a Florida P.E.

Water and Wastewater Engineering (Category 6)

1. Hydraulic models for water, reuse, and sewer.

2. Engineering for utility line extensions for water, reuse, and sewer.

3. Engineering for utility line and components relocations

4. Engineering for utility line point repairs

5. Inspection services for utilities.

6. Lift station, sewer and manhole condition assessment

7. Survey, Geotech, SUE for water and wastewater projects

8. Engineering for force main repair and replacement

9. Water and wastewater plant upgrades within CCNA

10. Asset Management Planning and Implementation

11. Permitting

12. Utility Rate Consulting

13. Funding Services (grant writing, planning & application services, program compliance & monitoring and funding…