TextileMaterial_Specs_Amended 01.14.19.pdf

Textile Materials and Related Clothing Items Specifications

Amended 1/14/19

Changes to specifications are highlighted in yellow within this document and identified below for your reference

Items #1-12 have had the following language added:

Please Note: Per industry standards all textile related shipments may have a ±10% variance

PACKAGING:

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have a label with the dye lot printed on it.

Item #8A, 8B: Sheeting …………….……………………………………………………………………… Page 9

Textile Materials and Related Clothing Items Specifications

Item #1: TWILL

SCOPE :

To provide MassCor with Twill that meets the requirements of the detailed specifications and general requirements of this RFR.

CHARACTERISTICS REQUIREMENT

Type 1: Twill Fiber Content 65% polyester / 35% cotton (±5%) Finished Width 60” overall (minimum) Finished Weight 7.5 oz / sq. yd. (± .25) Finished Thread Count 88 x 46 (± 5%) Construction 2 x 1 Shrinkage 3% Warp / Fill (Max) Finish Crease Resistant Finish Colorfastness Must meet 4A Wash Test

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a minimum of 150 and maximum of 200 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Each Vendor shall include a packaging slip and be clearly marked with Contract #, Purchase Order #, count/weight, product description including color/size and MassCor part # if available.

Requested Colors Green Navy Blue Gray White Brown Orange Khaki Maroon Red Postman Blue

Item #2A: TUBULAR JERSEY KNIT FABRIC (Flat)

To provide MassCor with Tubular Jersey Knit (t-shirt) Fabric that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 2A: Tubular Jersey Knit Flat Fiber Content 50% polyester / 50% cotton (± 5%) Sizes Requested 18”, 20”, 22”, 24”, 26", 28”, 30”, 32", 34”, 36” and 38" (± .5 per size) Yarn Size 22/1 Finish Pre-shrunk and anti-curl treated Color Bleached Optic White Weight 4.5 oz. / sq. yard min.

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a 40 to 45 lbs. rolls and maximum of 1 seam per roll. Rolls must be palletized and organized by size.

Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Note: If stakkers are unavailable rolls must be packaged at no more than 25 rolls to a pallet (5x5) rotating each rows direction by 90 ͦ .

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Item #2B, 2C: TUBULAR JERSEY KNIT RIB COLLAR TRIM & SHOULDER TAPE

To provide MassCor with Tubular Jersey Knit (t-shirt) Rib Collar Trim and Shoulder Tape that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 2B: Rib Collar Trim 2C: Shoulder Tape Construction 1 X 1 Rib Knit Fiber Content 50% polyester / 50% cotton (± 5%) 50% polyester / 50% cotton (± 5%) Sizes Requested 30” tubular 1 1/16” Yarn Size 24/1 22/1 Finish Pre-shrunk and anti-curl treated Pre-shrunk and anti-curl treated Color Bleached Optic White Bleached Optic White Weight 5.75 oz. / sq. yard

Tolerance (± .25)

4.5 oz. / sq. yard min.

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Rib Collar Trim:

Fabric shall be a 40 to 45 lbs. rolls and maximum of 1 seam per roll. Rolls must be palletized and organized by size.

Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Note: If stakkers are unavailable rolls must be packaged at no more than 25 rolls to a pallet (5x5) rotating each rows direction by 90 ͦ .

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Shoulder Tape:

Trim rolls will be 7 ½” diameter maximum and 15 rolls per shrink-wrapped sleeve, shipped in cartons.

Item #3A, 3B: SWEATSHIRT MATERIAL

To provide MassCor with Sweatshirt Fleece that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 3A: Fleece 3B: Rib Fiber Content 50% Cotton / 49% white poly / 1% blk poly (± 5%) 50% Cotton / 49% white poly / 1% blk poly (± 5%)

Width 60-62 Inches Open (for any size) 30” Tubular Weight 8.0 oz. / sq. yd., min. 6.5 - 7.0 oz. / sq. yd., min.

Color Ash grey Ash grey Shrinkage 8% Max., length & width 8% Max., length & width

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a 40 to 45 lbs. rolls and maximum of 1 seam per roll. Rolls must be palletized.

Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Note: If stakkers are unavailable rolls must be packaged at no more than 25 rolls to a pallet (5x5) rotating each rows direction by 90 ͦ .

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Item #4: POPLIN SCRUBS

To provide MassCor with Poplin Scrubs material that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 4: Poplin Scrub Fiber Content 65% polyester / 35% cotton, (±5%) Weave Plain Poplin Width 64”

Weight 4.50 oz. / sq. yard min.

Fabric Count W-106 F-54 Shrinkage 3% Warp / Fill (Max) Colorfastness Must meet 4a wash test

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Requested Colors Bright White Blue Bell Navy

Item #5: DENIM

To provide MassCor with Denim material that meets the requirements of the detailed specifications and

Type 5: Denim Finished Width 60” min.

Fiber Content 100% Cotton Weight 10 oz min. / sq yard Shrinkage 3% Max. Length and Width Color Blue Indigo

Colorfastness Must meet 4A Wash Test

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a minimum of 120 and maximum of 160 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

All packages shall be clearly marked with Contract #, Purchase Order #, yardage, roll number, shade designation, product description and MassCor part # if available. Shade lots shall be minimum 5,000 yards.

Item #6A, 6B, 6C: BLANKET MATERIAL

To provide MassCor with Jacket/Blanket material that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 6A: Jacket Lining 6B: Blanket Material 6C: Blanket Material Fiber Content 100% Polyester

100% Polyester (100% recycled polyester fiber) Non-woven needle punch fabric (napped on both sides)

100% Polyester knitted (napped on both sides)

Weight 7.2 oz / square yard min.

9.2 oz / sq. yard min.

2 lbs / blanket

6.8 oz / sq. yard min.

Width 60” cuttable min.

64” cuttable min.

and/or 65” x 93” cut unsewn min.

65” x 93” cut unsewn min.

Color Medium Grey Grey Grey

Please provide flame retardant characteristics information with submitted sample(s).

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Cut Blanket Material Pieces:

Cut Fabric shall be packaged in cartons:

24 pieces per carton Cartons shall be palletized

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility. Each Vendor shall include a packaging slip and be clearly marked with Contract #, Purchase Order #, count/weight, product description including color/size and MassCor part # if available.

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Rolls:

Jacket Lining: Fabric shall be delivered in 105 yards rolls ± 10%.

Blanket Material: Fabric shall be delivered in 75 yards rolls ± 10%..

Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Item #7A, 7B: TUBE SOCK MATERIAL

SCOPE:

To provide MassCor with Open Toe & Closed Toe Tube Sock material that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 7A: Unsewn 7B: Sewn Fiber Content 80% (12/1) cotton, 15% polyester, 5% elastic 80% (12/1) cotton, 15% polyester, 5% elastic

Toes Full cushion foot Full cushion foot Welt Top 3/4” 3/4” Ribbed Top Length 5.75 (inclusive of welt) 5.75 (inclusive of welt) Length 21” min. Finished at 20” Weight Min. 30 ounces / dozen Min. 30 ounces / dozen Color Bleached Optic White Bleached Optic White

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

There shall be 20 dozen to a case packaged in poly bags. Cases are palletized on standard sized pallets.

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Item #8A, 8B: SHEETING

To provide MassCor with Sheeting & Pillow case material that meets the requirements of the detailed

TYPE 8A: Muslin 8B: Percale Fiber Content 50% Cotton, 50% Polyster (± 5%)

Type 130 Muslin 50% Cotton, 50% Polyster (± 5%) Type 180 Percale

Taped Salvage both sides Taped Salvage both sides Sizes Requested Precut/Unsewn

38” x 30” 54” x 92” 66” x 106” (+ .5 per size)

38” x 30” 54” x 92” 66” x 106” (+ .5 per size)

Sizes Requested Rolls

38” 54” 66” (+ .5 per size)

38” 54” 66” (+ .5 per size)

Thread Count 130 min. 180 min.

Weight 3.1 oz sq yard min. (± 3%) 3.5 oz sq yard min. (± 3%) Color Optic White Optic White Shrinkage 3% Max. Length and Width 3% Max. Length and Width Finish Crease Resistant Finish Crease Resistant Finish

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Bales:

Fabric shall be packaged in bales:

Pillow case: 20 dozen per bale Sheets: 10 dozen per bale

All one dozen cut pieces shall be folded in a group (not individually) and packaged in a poly bag. Bales shall be palletized.

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Rolls:

Fabric shall be a minimum of 200 and maximum of 250 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Item #9A, 9B, 9C, 9D: TERRY TOWELING

To provide MassCor with Terry Toweling (Towel & Face Cloth) material that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 9A: Bath Towel 9B: Bath Towel 9C: Hand Towel 9D: Wash Cloths Fiber Content 86% Cotton, 14% Polyster 86% Cotton, 14% Polyster

86% Cotton, 14% Polyster

86% Cotton, 14% Polyster

Yarn size 16 single ringspun cotton

16 single ringspun cotton

16 single ring spun cotton

16 single ring spun cotton

Sizes Requested Precut/Unsewn

22” x 44” (+ .5)

20” x 40” (+ .5)

16” x 28” (+ .5)

12” x 12” (+ .5)

Sizes Requested Rolls

44” (+ .5)

40” (+ .5)

28” (+ .5)

36” (+ .5)

Color Bright Bleached Bright White

Bright Bleached Bright White

Bright Bleached Bright White

Bright Bleached Bright White

Weight 6.5 lbs. / dozen 5.5 lbs. / dozen 2.75 lbs. / dozen 1 lbs. / dozen

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Bales:

Fabric shall be packaged in bales:

Face Cloths: 100 dozen per bale Hand Towel: 50 dozen per bale Towel: 10 dozen per bale

All one dozen cut pieces shall be folded in a group (not individually) and packaged in a poly bag. Bales shall be palletized.

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Rolls:

Fabric shall be a minimum of 100 and maximum of 200 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility.

Item #10: BROADCLOTH MATERIAL

To provide MassCor with Broadcloth (Boxer) material that meets the requirements of the detailed

TYPE 10: Broadcloth Fiber Content 50% Cotton, 50% Polyester (± 5%) Fabric Dimensional Change 3% shrinkage max.

Width 60” min. finished width Fabric Weight 3.3 oz / sq yd min.

Fabric Count 104 ends” x 56 picks” min.

Color Bleached Optic White

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a minimum of 200 and maximum of 250 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Item #11: POPLIN CHAMBRAY

To provide MassCor with Cross Dyed Poplin Chambray (shirting) material that meets the requirements of the detailed specifications and general requirements of this RFR.

TYPE 11: Poplin Chambray Fiber Content 50% Polyester, 50% Cotton (± 5%)

Cross Dyed Selvage Edges

Finished Width 60” min. cuttable Weight 4.5 oz./sq. yd. (± .25) Color Chambray Blue Shrinkage 3% max.

Colorfastness 4A Wash Test

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” and be trimmed to no more than 1” from end of fabrics. Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Item #12: MESH MATERIAL

To provide MassCor with Mesh Laundry Bag material that meets the requirements of the detailed

Type 12: Mesh

Content 99/18 100% Polyester Mesh

3.5 x 3.75 meshes per inch

Width 24”- 25” Weight 4.2 oz.

Strength Ball Burst 150-170 lbs. per inch Color White Shrinkage 1% max.

Heat set to 400

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have

Fabric shall be a minimum of 125 and maximum of 150 yards with a maximum of 2 seams per roll with minimum piece length of 40 yards. Rolls must be palletized utilizing stakkers, shrink wrapped and properly strapped to the Per industries standard, pallet shall not to exceed 6’ in height and double strapped if

Non-crushable Cores shall be ¼” thick and have a minimum inner diameter of 1.75” and a maximum of 2.5” industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to

Item #13A, 13B, 13C, 13D, 13E: ELASTIC

To provide MassCor with Boxer Short/Pant/Heavy Pant Knitted Elastic material that meets the requirements of the detailed specifications and general requirements of this RFR.

Type 13A: Boxer Short

…….Elastic 13B: Boxer Short …….Elastic

13C: Pant …….Elastic

13D: Pant …….Elastic

13E: Heavy Pant …….Elastic

Content 68% Polyster 32% Latex 4 Sew Channels

63% Polyster 37% Latex 4 Sew Channels

66% Polyster 34% Latex

52% Polyster 48% Latex

61% Polyster 39% Latex Pre-Shrunk

Width

1-1/4” ± 1/16”

1-1/4” ± 1/16”

1-1/4” ± 1/16”

1-1/4” ± 1/16”

1-1/4” ± 1/16”

Warp/Weft 150 SD Denier polyester

1/150 SD

Textured polyester

150 SD

Denier polyester

1/150 SD

Textured

150 SD

Denier

Elastic Element 16 Ends, 34 gauge Natural Latex

15 Ends, 34 gauge Rubber

19 Ends, 34 gauge Natural Latex

19 Ends, 26 gauge Rubber

19 Ends, 32 gauge Natural Latex

Finished Picks 56 ± 2 52 ± 2 56 ± 2 46 ± 2 56 ± 2

Elongation 130% ± 10%

130% ± 10%

140% ± 10%

110% ± 10%

130% ± 10%

Shrinkage Heat set pre-shrunk

Calendared Heat set pre-shrunk

Heat set pre-shrunk

Heat set pre-shrunk

Color White White White White White

Fabric shall be shipped from the same dye lot. Each roll, alone or as a part of other information, shall have a label with the dye lot printed on it.

Product shall be packaged in 50 yard rolls according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit to and handling at the facility. If product is rolled for shipping core tubes must be trimmed to within 1 inch of the end of the fabric.

Item #14A, 14B, 14C, 14D: SEWING THREAD

To provide MassCor with Thread that meets the requirements of the detailed specifications and general

Type 14A: Perma Core

…….Tex 40 14B: Anecot Gimp …….Tex 180

14C: Perma Core …….Tex 60

14D: Perma Core …….Tex 80

Content 50/50 Poly Wrap / Poly Core

100% Cotton 50/50 Poly Wrap / Poly Core

50/50 Poly Wrap / Poly Core

Yards + 6,000 yards 1225 yards + 6,000 yards 6,000 yards

Colors White, grey, coronado, toboggan, red, burgundy red, spruce green, turquoise, china blue, medium navy, black

White, black White, black White, black

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit

ITEM #15A, 15B: EMBROIDERY THREAD

To provide MassCor with Embroidery Thread that meets the requirements of the detailed specifications and

Type 15A: Super Brite

…….Size 40 15B: J Metallic …….Size 40

Content 120 Denier 2 Ply Polyester

260 Denier Nylon

Yards + 5,500 yards

Colors Snow White, Sapphire, Black, Charcoal, Tear Drop Grey, Very Red, Delano Grey, Warm Sunshine, Navy, Midnight Navy, Ash

Aluminum, Gov’t Gold

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage and soiling in transit

Item #16A, 16B: ZIPPERS

To provide MassCor with Zippers that meets the requirements of the detailed specifications and general

Type 16A: #5 Aluminum

……..Pin Lock Type 16B: #4 Brass

Content ¾” Union 7/16 ” Top and Bottom Tape Ends

7” 7/16” Kensin

Bottom Stops 6”, 7” and 8”

Black Tape

Colors Beige, Black, Navy, White Beige, Black, Navy, White

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage during transit to and handling at the facility. If product is rolled for shipping core tubes must be trimmed to within 1 inch of the end of the fabric.

Item #17A, 17B, 17C: FASTENERS

To provide MassCor with Fasteners that meets the requirements of the detailed specifications and general

Type 17A 17B 17C Tack / Button Antique Copper Oak Leaf

#27 Tack/Button Arrow Aluminum #27 Tack/Button

Pearl Buttons 2 Hole

19 Ligne 12.5mm

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage during transit to and handling at the facility.

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.

MISCELLANEOUS ITEMS

To provide MassCor with miscellaneous needs that meets the requirements of the detailed specifications and

OTHER ITEMS (Please use catalog pricing tab on Textile cost spreadsheet):

o Velcro 3”x 25 yds Hook and Loop Fastener o Hook and Eye, Metal, Sizes 0-3 o 4-Part Staple Snap#24 Line Brass with Nickel Finish o Jean Rivets 9.5mm Nippel, Jean, Capped Metal o Plastic Snaps, 13mm, Various Colors o Close Cap Bebeto(prong) Snaps 7.5mm-21mm, Metal o Self-Piercing Grommets, #2 Grommets and Washers o Bobbins o Hat Tearaway o Cutaway o 3 hole rubber closures

Product shall be packaged according to best industry practices with each package individually wrapped except no metal banding, zip ties, clips, clamps, or staples are allowed, plastic banding is acceptable and shall be of sufficient strength and quality to completely protect products from damage during transit to and handling at the facility.

Per industries standard, pallet shall not to exceed 6’ in height and double strapped if exceeding 4’ in height.