Technical Specifications MFR signed.pdf
PDF 173 KB Posted
- Attached to
- Horizontal Aluminum Can Baler Federal contract opportunity
- Solicitation number
- FA446024Q0257
About this file
This document is a technical specification memo for a Horizontal Aluminum Can Baler required by the Department of the Air Force's Air Mobility Command (AMC) at Little Rock Air Force Base. The memo outlines the key technical specifications for the baler, including bale size (20" x 20" x 36", 60-250 lbs), cylinder size (minimum 5"), baler dimensions (8'9" x 3'9" x 3'6"), baler weight (approximately 2,100 lbs), 1-year warranty, and power requirements (1-Phase 220V / 10HP). The baler must be of the "Tire Service International TC-710" brand or equivalent to meet the specified requirements. In addition to the baler, the solicitation also requires the contractor to provide a slide rail for bale discharge, a drip pan, and a hopper top. Shipping and assembly are to be included as part of the offer.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Combo Synopsis Solicitation - Aluminum Can Baler.docx | DOCX document | |
| Combo Synopsis Solicitation - Aluminum Can Baler.pdf | ||
| 52.212-1 & 2 Addendum.docx | DOCX document | |
| Provisions and Clauses.pdf | ||
| Combo Synopsis Solicitation - Aluminum Can Baler.pdf | ||
| Combo Synopsis Solicitation - Aluminum Can Baler.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS 19TH AIRLIFT WING (AMC)
LITTLE ROCK AIR FORCE BASE, ARKANSAS
BLACK KNIGHTS… MOVE OUT!
18 July 2024
MEMORANDUM FOR RECORD
FROM: 19th Contracting Squadron 642 Thomas Ave Little Rock AFB, AR 72099
SUBJECT: Horizontal Aluminum Can Baler Technical Specification Requirements
1. The purpose of this memo is to document the technical specifications required for the Horizontal Aluminum Can Baler. The following specifications have been identified as necessary for the design and manufacture of the baler:
1.1. Bale Size: The baler must be capable of producing bales approximately 20" x 20" x 36" and between 60 and 250 pounds in weight.
1.2. Cylinder Size: The cylinder size of the baler must be no less than 5".
1.3. Baler Dimensions: The overall dimensions of the baler must be approximately 8’-9” in length, 3’-9” in width, and 3’-6” in height.
1.4. Baler Weight: The weight of the baler should be approximately 2,100 lbs.
1.5. Warranty: The baler must come with a 1-Year warranty.
1.6 Power Unit: The power unit for the baler must be a 1-Phase 220V / 10HP.
2. These technical specifications are critical to ensuring that the Horizontal Aluminum Can Baler meets the required performance standards and delivers the desired results. Please note that any technically acceptable submission must be approved by the appropriate authority before implementation.
3. Any issues may be addressed to Mike Minick at (501) 987-7187
MICHAEL C. MINICK, Civ, USAF Project Manager
| 2024-07-18T10:19:15-0500 | |
| MINICK.MICHAEL.C.1123313220 |
File details come from the government source that posted it. Updated .