Technical Specification Sheet_Strain Gage.pdf

This is a specification sheet for commercially available strain gage equipment required by the Government. The Government seeks 6 to 12 units of fiber optic strain gages operating at a wavelength of 1550 nm with a strain sensing capability of approximately 1.2 pm/micro strain and a sensing length of approximately 1 mm. The equipment must demonstrate peak reflectivity greater than 70 percent and utilize epoxy as the fastening method. Each strain gage must feature an FC Type Connector and include a cable length with a minimum of 1 meter. The document indicates this is a draft specification and emphasizes that only commercially available equipment meeting these technical parameters will be accepted.