Technical Proposal Evaluation.pdf
PDF 38 KB Posted
- Attached to
- Serv M22-048 Cyril Bath Stretch Form Press Repair Federal contract opportunity
- Solicitation number
- FA8126-22-Q-0082
About this file
This solicitation requests proposals for the replacement of hydraulic seals on a 300 Ton Cyril Bath Stretch Forming Press. The contractor shall perform seal replacements for ten cylinders on the equipment, design and supply the required replacement seals, provide one spare seal set for each cylinder and ten total spare seal sets, conduct two rigging mobilizations, and perform on-site resealing of all cylinders. The contractor must also provide seal drawings upon completion and demonstrate experience completing similar equipment repairs according to the original equipment manufacturer's specifications. Proposals are due by the date specified in the solicitation form and must include pricing for all line items, completion of fill-in provisions, and documentation of qualifications if not the OEM. The solicitation was issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for a firm fixed price repair contract.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| PWS - GPOC rev2.pdf | ||
| CSS_FA812622Q0082.pdf | ||
| Equipment List.pdf | ||
| Wage Determination 2015-5315_Rev19_13 July 2022.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL PROPOSAL EVALUATION-CRITICAL FACTOR LIST
Serv M22-048 300 Ton Cyril Bath Press Hydraulic Leak Repair (OC12029)
SPECIFIC REQUIREMENT ACCEPTABLE
NON-
ACCEPTABLE
REMARKS
1. The contractor shall perform the One-
Time, On-Base, Repair of 300 Ton CB
Stretch Forming Press (OC12029).
Requested services shall include the following:
• Contractor shall perform seal replacements for ten (10) each cylinders on the 300 Ton CB Stretch
Forming Press (OC12029).
• Contractor shall design and supply the required replacement seals.
• Contractor shall provide one (1) each spare seal set for each of the ten (10) cylinders (total of ten (10) spare seal sets).
• Contractor shall provide two (2) separate rigging mobilizations to remove and reinstall cylinders.
• Upon completion of seal replacements, the contractor shall provide on-site resealing of all ten
(10) each cylinders.
• Contractor shall perform the required services within the identified staging area at the equipment location, as directed by the government GPOC.
• Contractor shall provide seal drawings to the government immediately upon completion of the required seal replacements.
2. The Contractor shall provide personnel with the following special qualifications:
• Contractor shall provide proof of completing previous Cyril Bath repairs of the same or similar equipment.
• Contractor shall have access to all
OEM proprietary data necessary to perform the required services according to Cyril Bath OEM specifications.
File details come from the government source that posted it. Updated .