Technical Exhibit 1-Salient Characteristics_Equipment Specifications (1) (3).pdf
PDF 835 KB Posted
- Solicitation number
- PANMCC-25-P-0000_027076
About this file
This document contains detailed specifications for gravity roller conveyor systems at two different facilities: DRC BLDG 0-1101 and HDRS BLDG W-3593. Both locations require gravity conveyors capable of sustaining 42,000 lbs in a static state, with specific dimensional requirements. The DRC facility has two lanes approximately 246 feet long, each with four roller sections, featuring a 17 3/4" wide and 5 1/2" deep recessed area. The HDRS facility has six standard lanes and one Container Delivery System lane, each approximately 270 feet long, with reinforced guide rails three inches taller than the roller surface. Both systems require removable locks or stoppers to prevent movement onto scales, and are designed to receive flatbed trucks with gravity rollers and leveling capabilities. The third page provides detailed roller and guide rail measurements, including outside and inside roller dimensions and spacing.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRC BLDG 0-1101
These rollers are set into the floor, with a drive-in entrance and calibrated scales at the outload end, designed like that of a loading dock to receive a flatbed configured with gravity rollers and leveling capabilities.
The recessed measurement are:
17 3/4" wide
5 1/2" depth
Two lanes at ~246ft long with each lane having four roller sections per lane.
CURRENT MAX CAPACITY OF PLATFORM IS
42,000lbs @ 32’ x 9’
-we are looking for a gravity conveyor that can sustain this amount of weight in a static / constant state.
- removable locks and/or stoppers to prevent movement on to scales.
HDRS BLDG W-3593
These rollers are bolted to the floor with guide rails traveling the length of the lane. At the drive-in entrance there are five over head cranes. At the outload end there are calibrated scales, designed like that of a loading dock to receive a flatbed configured with gravity rollers and leveling capabilities.
Six lanes at ~270ft long with each lane having four roller sections per lane. Additionally one Container Delivery System lane with only two sections ~270ft long with no guide rails.
CURRENT MAX CAPACITY OF PLATFORM IS
42,000lbs @ 32’ x 9’
-we are looking for a gravity conveyor that can sustain this amount of weight in a static / constant state.
-reinforced guide rails three inches taller than the surface of the rollers.
- removable locks and/or stoppers to prevent movement onto scales.
OUTSIDE
ROLLERS
H: 5 ½” W: 13 ¼” DIST. TO INSIDE
ROLLER: 11 ½”
DIST. FROM
GUIDE RAIL: 9
1/10”
INSIDE
ROLLERS
H: 5 ½” W: 11 ¼” DIST. BETWEEN INSIDE
ROLLERS: 19 ¾”
Between Guides 109 ¾”
File details come from the government source that posted it. Updated .