Technical Capability Statement.pdf
PDF 243 KB Posted
- Attached to
- RELIEF VALVE
- Solicitation number
- N4215826QE072
About this file
This document is a Technical Capabilities Statement and certification form for a relief valve solicitation N4215826QE072. The vendor must certify that the quoted item meets all specified capabilities and features and can assume all contractor responsibilities by completing and submitting this form with their quote for award consideration.
The relief valve must be constructed of Corrosion Resistant Stainless Steel (CRES) with 1-5/16"-12UN-2B inlet/outlet connections, capacity exceeding 8 gallons per minute, and a set point of 550 +0/-20 PSI. Additional performance requirements include accuracy less than 55 PSI and repeatability less than 10 PSI. The specified part is Circle Seal P/N RV51-45-550 with no substitutes allowed. The vendor must certify compliance with the mercury-free clause and certificate of compliance clause. The vendor certifies that the item meets or exceeds all specifications and contractor responsibilities stated in the solicitation in their entirety with no exceptions by initialing and dating the certification section.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - N4215826QE072.pdf | ||
| Certificate of Compliance.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N4215826QE072 – Enclosure (1)
Page 1 of 1 (Rev 1)
Vendor shall certify that item quoted meets the capabilities, features and specifications listed below and that vendor can assume all contractor responsibilities stated below by initialing at the bottom. In order to be considered for award, this must be completed and submitted with the vendor quote.
TECHNICAL CAPABILITES STATEMENT
RELIEF VALVE
Shall be provided with the following capabilities, features and specifications: Yes No
RELIEF VALVE,
CRES,
1-5/16"-12UN-2B INLET/OUTLET CONNECTIONS,
CAP > 8 GPM,
SET POINT = 550 +0/-20 PSI,
ACC < 55 PSI,
REP < 10 PSI,
CIRCLE SEAL P/N RV51-45-550
*NO SUBSTITUTES ALLOWED*
*MERCURY FREE CLAUSE INVOKED*
*CERTIFICATE OF COMPLIANCE CLAUSE INVOKED*
TECHNICAL CAPABILITY/CONTRACTOR RESPONSIBILITY CERTIFICATION
Vendor hereby certifies that vendor’s item meets or exceeds all specifications and contractor responsibilities stated in this solicitation, in their entirety, with no exceptions. __________ (initials)
DATE: _________________________________________
File details come from the government source that posted it. Updated .