Techincal Exhibit 1 Specifications for Evaluation Submission Sheet.pdf

Submission for Brand Name or Equal (Required for Submission: Buy Terms)

Technical Exhibit #1: Specifications for Evaluation and Submission Sheet

Vendor must fill out Company’s name, POC, UEI, Date Company Name:

POC:

Signature of Vendor:

Date:

UEI:

Failure to submit this a complete submission sheet with vendor’s signature will be result in a not acceptable rating.

Line Item

Quantity & Unit of Measure

IN EACH

Exact Brand Name and Equal *Vendor’s Name Submission-Please Read Provision 52.211-6 & all buy terms) Any alternate brand name requires Specification Sheet. Vendor must make comments below for each specification listed. Alternate Brand Name must be listed for comparison and Vendor is required to state how it is equal. Any blank responses will result in an “Not

Acceptable Evaluation”

Customer Technical Evaluation (Acceptable or Not Acceptable)

1 each Type 6 Wildland Fire Truck designed for off-road and on-road firefighting operations. (please see below for complete specification).

Provide Brand Name/alternate and Model number. Specification sheet must be attached.

Specifications salient characteristics All specifications must be equal to the following specifications and/or salient characteristics presented

1. General Requirements:

• The vehicle must be a Type 6 Wildland Fire Truck designed for off-road and on-road firefighting operations.

• The truck must comply with all applicable NFPA (National Fire Protection Association) standards, including NFPA 1906 for Wildland Fire Apparatus.

• The vehicle must meet all federal, state, and local regulations for emissions, safety, and operational standards.

2. Chassis and Engine:

• Chassis: Commercial 4x4 chassis with a minimum GVWR (Gross Vehicle Weight Rating) of 19,500 lbs.

• Engine: Diesel engine with a minimum of 300 horsepower and 660 lb-ft of torque.

• Transmission: Automatic transmission with a minimum of 6 speeds.

• Suspension: Heavy-duty suspension suitable for off-road conditions.

• Tires: All-terrain tires with a full-size spare tire included.

• Fuel Capacity: Minimum 40-gallon fuel tank.

3. Cab and Body:

• Cab: Two-door or four-door cab with seating for a minimum of 2 personnel. Preference for two-door due to turning radius limitations on Glynco forest roads.

• Body: Aluminum or stainless-steel body construction for corrosion resistance and durability.

• Storage: Lockable compartments for equipment storage, including shelves and tool mounts.

• Lighting: LED emergency lighting package, including scene lights, warning lights, and a light bar.

• Bumper and Winch: Protective front bumper with appropriately sized winch installed.

• Siren and PA System: Integrated siren and public address system.

4. Firefighting Equipment:

• Water Tank: Minimum 300-gallon water tank made of corrosion-resistant material.

• Pump: Minimum 150 GPM (Gallons Per Minute) pump at 150 PSI (Pounds per Square Inch).

• Hose Reels: Two electric rewind hose reels with a minimum of 200 feet of 1-inch hose each.

• Nozzles: Adjustable nozzles for water application. Front bumper ground sweep nozzles.

• Hand Tools: Storage for wildland firefighting hand tools, including Pulaskis, shovels, and McLeods.

5. Safety Features:

• Roll Cage: Integrated roll cage for crew protection.

• Seat Belts: Three-point seat belts for all seating positions.

• Fire Extinguishers: Minimum of two 10-pound ABC fire extinguishers mounted in the cab and body.

• Backup Camera: Rearview backup camera with in-cab display.

• First Aid Kit: Comprehensive first aid kit mounted in the cab.

6. Warranty and Support:

• Warranty: Minimum 5-year/100,000-mile warranty on the chassis and engine, and a 2-year warranty on the firefighting equipment.

• Training: On-site training for operators and maintenance personnel.

• Manuals: Comprehensive operator and maintenance manuals provided in both print and digital formats.

7. Delivery and Acceptance:

• Delivery: The vehicle must be delivered to FLETC Glynco.

• Inspection: The vehicle will undergo a thorough inspection and acceptance testing by FLETC Glynco personnel to ensure compliance with all specifications.

8. Additional Requirements:

• Customization: The vendor must be able to accommodate minor customization requests to meet specific operational needs.

• Documentation: All necessary documentation, including titles, registration, and compliance certificates, must be provided upon delivery.