Tech Data PGC 02767-updtd-5-28-20.pdf

May 28, 2020

TECH-DATA PGC02767

NSN 8440014952994

SOCK, MAN'S, BLACK STRETCH, TYPE III,

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY

AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL

AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION

ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE

MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT

INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

SOCK, MAN'S, BLACK STRETCH (NAVY) (3 PACK)

INTERIM CHANGES TO A-A-50015C

PAGE 1, UNDER CLASSIFICATION ADD "TYPE III SOCK,

MAN'S, BLACK STRETCH (NAVY) (3 PACK)"

PAGE 1, PARA. 3.1.1 LINE 1 DELETE "MOCK OR".

PAGE 2, PARA. 3.1.2 LINE 1 AFTER "KNITTED"

DELETE "WITH A RIBBED ELASTIC TOP" AND

SUBSTITUTE "WITH A TRUE RIB ELASTIC TOP".

PAGE 2, PARA. 3.5 ADD UNDER TYPE II "X LARGE 15

AND OVER".

PAGE 2, PARA. 3.5 UNDER TYPE III COLUMN, LINE 5,

DELETE "13-15" AND SUBSTITUDE " 13-16"

PAGE 2, PARA. 3.5.1 STRETCH AND WEIGHT. DELETE REFERENCE

TO "TABLES I AND II" AND REPLACE WITH "TABLES II AND III".

PAGE 3, TABLE II, ADD NEW COLUMNS STARTING WITH

WITH SIZE "X-LARGE 13.5, 10-1/2, 14-1/2, 18".

PAGE 3, TABLE III, LINE SM, UNDER RELAXED FOOT LENGTH

DELETE "9-1/2" AND SUBSTITUTE "8",

COLUMN 5, DELETE "11-1/2" AND SUBSTITUTE "10"

PAGE 3, DELETE "TABLE I" AND SUBSTITUTE "TABLE II".

PAGE 3, DELETE "TABLE II" AND SUBSTITUTE "TABLE III".

PAGE 3, PARA. 3.7.2 DELETE IN ITS ENTIRETY AND

SUBSTITUTE; "ALL SOCKS SHALL BE BANDED IN

PACKAGES OF THREE WITH AN APPROVED COMMERCIAL

BAND WHICH WILL INCLUDE DLA TROOP SUPPORT LOGO AND NSN AND

UPC BARCODES. THE BAR CODING ELEMENT SHALL BE

A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE

SHALL BE A 12 DIGIT UPC NUMBER ASSIGNED FOR ALL

NSN'S BY THE PROCURING AGENCY. THE UPC BAR

CODING ELEMENT SHALL BE UNDERNEATH THE NSN BAR

CODE. THE INITIALS UPC MUST APPEAR BENEATH THE

UPC BAR CODE. THE BAR CODE FOR THE NSN AND UPC

TYPE SHALL BE A MEDIUM TO HIGH CODE DENSITY AND

SHALL BE LOCATED ON THE BAND SO THAT IT IS

COMPLETELY VISIBLE AND SCANNABLE. THE

CONTRACTING OFFICER WILL PROVIDE SUCCESSFUL

CONTRACTOR (S) THE LOGO. THE CONTRACTOR SHALL

THEN SUBMIT TO THE CONTRACTING OFFICER A SAMPLE

BAND FOR APPROVAL."

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM FEDERAL

SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY CANCELLED, AND REPLACED WITH

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-

D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SHIPPING CONTAINERS.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL

BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS,

REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY

REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST

SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS

"PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1

23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

NO ADDITIONAL INFORMATION FOLLOWS

(Ref. T0898)

Marking shall be in accordance with MIL-STD-129 and Notice 4.

Fiberboard shipping container conforming to ASTM-D-5118, Type CF, Style RSC-L (liner), Grade 275, variety SW, Class domestic

Any commercial closure method cited in ASTM-D1974 is acceptable except stapling

PRES/PACK TO ASTM-D-3951

40 packages

120 per shipping carton

RFID HANGTAG:

An RFID inlay shall be added to the barcode paper hang tag attached to each item.

Where the use of self-adhesive bar-code labels are authorized, the RFID inlay may be added to the self-adhesive label in lieu of a paper hang tag. All other contract barcode and hang tag requirements still apply.

The RFID inlay should be passive Gen2 with a frequency range between 860 and 960 MHz.

The RFID antenna should be Avery/Dennis AD222 or comparable with ISO/IEC 18000-C

EPCglobal C1G2 Protocol and an EPC memory allocation containing a 96 bit EPC Number.

The data linking the EPC number to the NSN and quantity unit pack must be exportable to VIM/ASAP. The bar code of the EPC Number must be printed at the bottom of the tag along with the human readable version below the bar code.

In addition to defects applicable to the paper tag and barcoding element, the RFID tag shall be examined for the defects listed below:

RFID Inlay omitted

RFID Inlay not secure

RFID Inlay not laying flat when packaged

RFID Inlay not readable with RFID scanner

RFID Inlay or configuration not as specified

The manual "Item-Level Passive RFID Technology Manufacturer's Information Guide" provides guidance on RFID implementation and is available from the contracting officer.

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required

(ref. T8379; Nov. 08, 2006)

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of

International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for

Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American

Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM

Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or

NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS SHALL NOT EXCEED

43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES IN HEIGHT (INCLUDING THE

PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. THE

USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS DISCOURAGED. PALLET LOADS

SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE

MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE

NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END OF A

SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY.

SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS (WPM) - (JULY

2006)

TGI DATA:

INCLUDE T0043 OBJECT TEXT ID ST

INSPECTION AND ACCEPTANCE AT DESTINATION.

REVIEW OF THIS ITEM HAS DETERMINED THAT THE SPECIFICATIONS, STANDARDS, PRODUCT

DESCRIPTIONS OR OTHER TECHNICAL DATA APPLICABLE TO THIS PROCUREMENT ACTION DO NOT

REQUIRE THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) OR ODC(S).

52.246-15 CERTIFICATE OF CONFORMANCE

52.246-2, Inspection of Supplies - Firm-Fixed Price

52.209-4, Alt. I, First Article Approval - Government Testing

INCLUDE T0029 OBJECT TEXT ID ST

ADDITIONAL INFORMATION FOR COMMERCIAL AQL'S:

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS (CID'S):

VISUAL - GENERAL INSPECTION LEVEL II, AQL - 1.0

DIMENSIONAL - SPECIAL INSPECTION LEVEL S-2, AQL - 2.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE USE

OF "SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES", ANSI/ASQC Z1.4