TDPL.pdf

• MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND OTHER TECHNICAL DATA LISTED IN THIS TDP.

• THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDP IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE AMENDMENT OR REVISION LEVEL FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE AS SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDP. SUPERSEDED SPECIFICATIONS AND STANDARDS WHICH MAY BE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERSEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDP. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE

Number: 12496882 Organization ID: 19207

Name: TIRE/WHEEL ASSEMBLY TPP Create Date: 2020-08-07 08:57:21 EDT

Last Verification Run(TDP Date): 2020-08-07 09:14:12 EDT

Product Structure (3 objects) Number Name CAGE Code Version Context QUANTITY UOM

12496882 TIRE/WHEEL ASSEMBLY 19207 A.5 TRL

12496880 WHEEL 19207 A.3 TRL 1.0 each 12504900 PNEUMATIC TIRE 19207 A.1 TIRES_WHEELS 1.0 each

Product Drawings (3 objects) Number Name CAGE Code Version Context EXPORT CONTROL DISTRIBUTION CODE REVISION DATE DOC TY

12496880_DP WHEEL 19207 A.4 TRL false A 2010-09-30 04:00:00.0 DP 12496882_DP TIRE/WHEEL ASSEMBLY 19207 A.3 TRL false A 2010-09-30 04:00:00.0 DP 12504900_DP PNEUMATIC TIRE 19207 A.2 TIRES_WHEELS false A 2013-10-17 04:00:00.0 DP

Specifications (13 objects) QPL Number Name

A-A-52611 VALVES AND VALVES SPUDS, CAPS, AND CORES, PNEUMATIC TIRE

ASME Y14.100 ENGINEERING DRAWING PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

ASTM A1011/A1011M STEEL, SHEET AND STRIP, HOT-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW

ASTM F1922 TIRES, PNEUMATIC, VEHICULAR, HIGHWAY, STANDARD TEST METHOD FOR

AWS D1.1/D1.1M STRUCTURAL WELDING CODE - STEEL

CATL-1922 COOPERATIVE APPROVED TIRE LIST (CATL)

FMVSS 49 CFR 571.120 TIRE SELECTION AND RIMS AND MOTOR HOME/RECREATION VEHICLE TRAILER LOAD CARRYING CAPACITY INFORMA

Q MIL-DTL-53039 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

MIL-STD-130 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

SAE J179 LABELING - DISC WHEELS AND DEMOUNTABLE RIMS - TRUCKS

SAE J267 WHEELS/RIMS - PERFORMANCE REQUIREMENTS AND TEST PROCEDURES - TRUCK AND BUS

Q TT-C-490 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES (BASE FOR ORGANIC COATINGS

* NOT FURNISHED - TO BE OBTAINED FROM STANDARDIZATION DOCUMENTS ORDER DESK, BLDG. 4D, 700 ROBBINS AVENUE, PHILADELPHIA, PA ** NOT FURNISHED - COMMERCIAL SPECIFICATIONS AND STANDARDS MAY BE OBTAINED FROM THE PUBLISHERS. THEY ARE NOT AVAILABLE F Q - THE LETTER (Q) BEFORE THE SPECIFICATION NUMBER INDICATES THAT A QUALIFIED PRODUCTS LIST IS REQUIRED. THE NUMBER OF THE QP NOTICE: UNLESS OTHERWISE NOTED, ALL MIL-STD'S ARE USED FOR REFERENCE ONLY OR HAVE BEEN REPLACED. (I/M = INTERFACE PRACTICE /

Replacement Specifications (5 objects) Number REPLACEMENT INFORMATION

ASTM A1011 REWRITTEN AS ASTM A1011/A1011M

AWS-D1.1 REWRITTEN AS AWS D1.1/D1.1M

MIL-C-53039 REWRITTEN AS MIL-DTL-53039

MS51368 SEE NOTICE FOR REPLACEMENT INFORMATION

ZZ-V-25 REPLACED BY A-A-52611

Special Clauses (2 objects)

DOCUMENT NUMBER PADDS CLAUSE

SC-MIL-DTL-53039 ES7450

SC-TT-C-490 ES7146 AND ES7450