TDPL.pdf

• MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND OTHER TECHNICAL DATA LISTED IN THIS TDP.

• THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDP IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE AMENDMENT OR REVISION LEVEL FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE AS SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDP. SUPERSEDED SPECIFICATIONS AND STANDARDS WHICH MAY BE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERSEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDP. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE

Number: 12565653 Organization ID: 19207

Name: TIRE & WHEEL ASSEMBLY TPP Create Date: 2019-11-13 09:59:32 EST

Last Verification Run(TDP Date): 2019-12-02 12:50:49 EST

Product Structure (5 objects) Number Name CAGE Code Version Context QUANTITY UOM

12565653 TIRE & WHEEL ASSEMBLY 19207 C.2 TIRES_WHEELS

17073EBKC WHEEL 1S0R6 -.1 TIRES_WHEELS 1.0 each 51278 TIRE 22337 -.2 TIRES_WHEELS 1.0 each 90 MS-27 (V3.20.4) VALVE ASSEMBLY 63900 -.1 TIRES_WHEELS 1.0 each HE-383 VALVE EXTENSION 63900 -.1 TIRES_WHEELS 1.0 each

Product Drawings (1 objects) Number Name CAGE Code Version Context EXPORT CONTROL DISTRIBUTION CODE REVISION DATE DOC T

12565653_DP TIRE & WHEEL ASSEMBLY 19207 C.2 TIRES_WHEELS false A 2018-05-02 04:00:00.0 DP

Specifications (11 objects) QPL Number Name

ASME Y14.100 ENGINEERING DRAWING PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCING

Q MIL-DTL-53022 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE Q MIL-DTL-53039 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT

MIL-DTL-53072 CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTIO

Q MIL-DTL-53084 PRIMER, CATHODIC ELECTRODEPOSITION CHEMICAL AGENT RESISTANT

Q MIL-DTL-64159 CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT

Q MIL-PRF-32348 POWDER COATING, CAMOUFLAGE CHEMICAL, AGENT RESISTANT SYSTEMS

SAE AMS-STD-595 COLORS USED IN GOVERNMENT PROCUREMENT

SAE J2014 PNEUMATIC TIRES FOR MILITARY TACTICAL WHEELED VEHICLES

Q TT-C-490 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR FERROUS SURFACES (BASE FOR ORGANIC COATINGS)

* NOT FURNISHED - TO BE OBTAINED FROM STANDARDIZATION DOCUMENTS ORDER DESK, BLDG. 4D, 700 ROBBINS AVENUE, PHILADELPHIA, PA ** NOT FURNISHED - COMMERCIAL SPECIFICATIONS AND STANDARDS MAY BE OBTAINED FROM THE PUBLISHERS. THEY ARE NOT AVAILABLE F Q - THE LETTER (Q) BEFORE THE SPECIFICATION NUMBER INDICATES THAT A QUALIFIED PRODUCTS LIST IS REQUIRED. THE NUMBER OF THE QP NOTICE: UNLESS OTHERWISE NOTED, ALL MIL-STD'S ARE USED FOR REFERENCE ONLY OR HAVE BEEN REPLACED. (I/M = INTERFACE PRACTICE /

Replacement Specifications (2 objects) Number REPLACEMENT INFORMATION

ASME-Y14.5M REWRITTEN AS ASME Y14.5

FED-STD-595

Special Clauses (4 objects)

DOCUMENT NUMBER PADDS CLAUSE

SC-MIL-DTL-53039 ES7450

SC-MIL-DTL-53072 ES7450

SC-MIL-DTL-64159 ES7450

SC-TT-C-490 ES7146 AND ES7450