TDP for EH8E1464EH - CWTK.pdf

C

A

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

2 PLACE DECIMALS �#�

3 PLACE DECIMALS �#�

FORMAT: C_TACOM_ENG_1_0

DRAWING SIZE C

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

-1, OR -2

PADLOCK, SOLID BRASS, 9" CHAIN-1, OR -20700J00005967812

IDENTIFICATION PLATE0692A00015967813

WARRANTY CONTACT INFORMATION LABEL0692A00035967814

INVENTORY AND WARRANTY MARKING0692A00045967815

COMPONENTS LIST, CWTK0692D00005967816

SEE NOTES 5, AND 6

SEE NOTE 4

ISO VIEW

4 5

SEE NOTE 32

1 OF 11/2

0692A000059678C

CANVAS WORKERS

TOOL KIT (CWTK)

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692A0000

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

TOOL BOX, HAND CARRY, REMOVABLE TRAY, 21"0700C00015967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. PACKING INSTRUCTIONS: ALL ITEMS IN THE

CWTK COMPONENTS LIST (0692D0000) SHALL BE

LOADED WITHIN THE TOOL CHEST.

3. PADLOCK (0700J0000) DOES NOT REQUIRE A

DEDICATED STORAGE LOCATION INSIDE THE TOOL CHEST.

INSTEAD, IT MAY BE STORED IN THE USE LOCATION,

LOCKING THE CHEST. THE CHAIN SHALL BE ATTACHED

TO THE OUTSIDE OF THE TOOLBOX (0700C0001).

4. PLACED IN A PLAINLY VISIBLE LOCATION ON THE

FRONT EXTERIOR OF EACH CHEST SO THE LABEL

IS VISIBLE AND UPRIGHT WHEN THE CHEST IS CLOSED

IN PREPARATION FOR SHIPMENT OR STORAGE

5. WARRANTY CONTACT INFORMATION LABEL (0692A0003)

SHALL BE ATTACHED TO THE INTERIOR OF THE TOOLBOX

IN A PLAINLY VISIBLE LOCATION.

6. INVENTORY AND WARRANTY MARKING (0692A0004)

SHALL BE ATTACHED TO THE INTERIOR OF THE TOOLBOX

IN A PLAINLY VISIBLE LOCATION.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SEE NOTE 2

( )6.00

( )4.00

1 OF 11/1

0692A000159678C

IDENTIFICATION PLATE

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-24K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692A0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K18O3006-

PART NO. 0692A0001

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

SPECIFICATIONS

TYPE IDENTIFICATION PLATE

MATERIAL ALUMINUM, PLASTIC, OR OTHER NON-METAL MATERIAL

FINISH SATIN OR MATTE

COLOR

BACKGROUND: BLACK

LETTERING: WHITE

ADHESION

PERMANENTLY AFFIXED; RESISTANT TO DETERIORATION CAUSED

BY HEAT, COLD, AND SOLAR RADIATION TO THE EXTENT THAT

IT WILL REMAIN INTACT AND READILY LEGIBLE; RESISTANT

TO PEELING

CHEMICAL RESISTANCE

ALL MATERIALS AND ADHESIVES SHALL BE RESISTANT TO

WATER, REFRIGERANTS, AUTOMOTIVE OILS, GREASES,

LUBRICANTS, FUELS INCLUDING GASOLINE, DIESEL FUEL,

JP-8 AND JP-4, ACIDS, BASES, COOLANTS, ALCOHOLS, AND

CLEANING AGENT

LANGUAGE

ALL CAPITAL LETTERS WITHOUT SERIFS (SANS-SERIF); FONTS

SUCH AS ARIAL, FUTURA, GOTHIC, TREBUCHET MS, OR OTHER

SANS-SERIF FONTS SHALL BE UTILIZED; ALL NUMBERS GOTHIC

TYPE; MAY BE SUPPLEMENTED BY GRAPHICAL SYMBOLS

LETTER SIZE

THE FOLLOWING FIELD DESCRIPTION & LABEL CHARACTERS TO

BE NO LESS THAN 0.18 HIGH:

A. CANVAS WORKERS TOOL KIT

B. END ITEM NSN: 5180-00-754-0731

C. END ITEM LIN: W34237

THE FOLLOWING FIELD DESCRIPTION & LABEL CHARACTERS TO

BE NO LESS THAN 0.125 HIGH:

A. SPECIFICATION DATA: 0692A0000:59678

B. MANUFACTURER:

C. CAGE CODE:

D. MFG P/N:

E. CONTRACT NUMBER:

SPECIAL FEATURES

ALL BLANK FIELDS OR FIELDS PICTURED WITH "XXXX" SHALL

BE DEFINED POST AWARD

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. IF UNIQE ITEM IDENTIFICATION (UII/UID/RFID)

IS REQUIRED, IT MAY BE INCLUDED ON THIS PLATE.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

WARRANTY CONTACT INFORMATION LABEL

ADHESION PERMANENTLY AFFIXED; RESISTANT TO

DETERIORATION CAUSED BY HEAT, COLD, AND

SOLAR RADIATION TO THE EXTENT THAT THEY

WILL REMAIN INTACT AND READILY LEGIBLE;

RESISTANT TO PEELING

CHEMICAL RESISTANCE ALL MATERIALS AND ADHESIVES SHALL BE

RESISTANT TO WATER, REFRIGERANTS,

AUTOMOTIVE OILS, GREASES, LUBRICANTS,

FUELS INCLUDING GASOLINE, DIESEL FUEL,

JP-8 AND JP-4, ACIDS, BASES, COOLANTS,

ALCOHOLS, AND CLEANING AGENTS

LANGUAGE ENGLISH; MUST BE SUPPLEMENTED WITH

GRAPHICAL SYMBOLS

1 OF 11/1

0692A000359678C

WARRANTY CONTACT

INFORMATION LABEL

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692A0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692A0003

NSN (NATIONAL STOCK NUMBER)

SPECIFICATIONS

TYPE

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. FOR MORE INFORMATION ON THIS LABEL,

CONTACT THE CONTRACTING OFFICER.

3. NON-WARRANTY ITEMS:

IN ADDITION TO THE WARRANTY INFORMATION REQUIRED ON THIS DRAWING, A METHOD FOR NON-WARRANTY ORDERING OF REPLACEMENT TOOLS FROM THE CONTRACTOR SHALL BE PROVIDED. THE PROCEDURES AS DETERMINED BY THE CONTRACTOR (INCLUDING PHONE NUMBER, WEB SITE AND EMAIL ADDRESS IF THEY ARE APPLICABLE) MAY BE PROVIDED SEPARATELY OR

INCLUDED WITH OR NEAR THE OTHER WARRANTY INFORMATION SPECIFIED IN THIS DRAWING.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

INVENTORY AND WARRANTY MARKING

CONTENT

1) DIAGRAMS

2) TABLE

3) WARRANTY INFORMATION OF THE SET

1) DIAGRAM CONTENT

COLOR PHOTOGRAPHS OF THE ACTUAL TOOLS OR A COLOR PHOTOGRAPH OF THE

DRAWER OR TRAY; SHALL SHOW THE LOCATION OF EACH COMPONENT OF THE

CTK TOOL SET IN ITS LOADED POSITION; EACH TOOL SHALL BE IDENTIFIED

BY A UNIQUE DIAGRAM FIND NUMBER

2) TABLE CONTENT

SHALL CORRELATE THE FOLLOWING:

1) DIAGRAM FIND NUMBER OF EACH ITEM

2) NOMENCLATURE OF EACH ITEM

3) MANUFACTURER OF EACH ITEM

4) PART NUMBER OF EACH ITEM

5) NSN OF EACH ITEM (IF AVAILABLE)

6) WARRANTY INFORMATION OF EACH ITEM

3) WARRANTY INFORMATION OF THE SET

SHALL INCLUDE THE FOLLOWING:

1) GOVERNMENT CONTRACT NUMBER

2) DATE OF MANUFACTURE (MONTH AND YEAR)

3) NAME AND ADDRESS OF THE CONTRACTOR

4) TOLL FREE PHONE NUMBER FOR WARRANTY SERVICE CALLS

5) ANY OTHER MEANS OF CONTACTING THE CONTRACTOR SUCH AS DATA FAX

NUMBER OR E-MAIL ADDRESS

ADHESION

PERMANENTLY AFFIXED; RESISTANT TO DETERIORATION CAUSED BY HEAT,

COLD, AND SOLAR RADIATION TO THE EXTENT THAT THEY WILL REMAIN

INTACT AND READILY LEGIBLE; RESISTANT TO PEELING

CHEMICAL RESISTANCE

ALL MATERIALS AND ADHESIVES SHALL BE RESISTANT TO WATER,

REFRIGERANTS, AUTOMOTIVE OILS, GREASES, LUBRICANTS, FUELS INCLUDING

GASOLINE, DIESEL FUEL, JP-8 AND JP-4, ACIDS, BASES, COOLANTS,

ALCOHOLS, AND CLEANING AGENTS

1 OF 11/1

0692A000459678C

INVENTORY AND

WARRANTY MARKING

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692A0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692A0004

SPECIFICATIONS

TYPE

LANGUAGE

ALL CAPITAL LETTERS WITHOUT SERIFS (SANS-SERIF); FONTS SUCH AS

ARIAL, FUTURA, GOTHIC, TREBUCHET MS, OR OTHER SANS-SERIF FONTS

SHALL BE UTILIZED; ALL NUMBERS GOTHIC TYPE; MAY BE SUPPLEMENTED BY

GRAPHICAL SYMBOLS

COLOR

BACKGROUND: WHITE

LETTERING/TABLE OUTLINE: BLACK

PHOTOS/DIAGRAM: COLOR

LETTER SIZE 10 PT FONT MIN (.138 INCHES)

LABEL SIZE SIZED TO FIT INSIDE INTERIOR OF TOOL CHEST LID

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

HOLE CUTTING KIT0692D10015967812

FASTENER FORMING KIT0692D10025967813

HAMMER & TIPS ASSEMBLY0692D20005967814

SCREWDRIVER, FLAT TIP, 3/8", HEX BOLSTER, 8" BLADE-2,-3,-4, OR -50712B00035967815

NUT DRIVER, 1/2"-1, OR -20712F10065967816

STUD FASTENER, FLAT TIP SCREWDRIVER-10712H00025967817

STUD FASTENER, HEX TIP SCREWDRIVER-10712H00035967818

WRENCH, ADJUSTABLE, 1-1/8 X 8"-2,-3,-4,-5, OR -60714E00025967819

PLIERS, SLIP JOINT, COMBINATION JAW, 6"-2,-3,-4,-5,-6,-7,-8, OR -90718A100159678110

SHEARS, BENT TRIMMERS, 12" LENGTH-10718H000059678111

PUNCH, CUTTING, REVOLVING HEAD-10720L000659678112

HAMMER, TINNER'S RIVETTING-1, OR -20721J000159678113

HAMMER, UPHOLSTERER'S TRIMMING, WITH CLAW-10721J000259678114

SHARPENING STONE, COARSE AND FINE, 8"-1, OR -2 0732A000059678115

CORRUGATED STITCHER, CEMENTING WHEEL-10733L000659678116

1 OF 11/2

0692D000059678C

COMPONENTS LIST,

CWTK

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692A0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D0000

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

STITCHING KIT0692D10005967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

THIMBLE, SEWING, OPEN END-10742F00005967812

SEWING PALM, RIGHT HAND-10742F00015967813

AWL & NEEDLE ASSEMBLY0692D20015967814

NEEDLE & CONTAINER ASSEMBLY0692D20025967815

1 2 3 4 5

1 OF 11/2

0692D100059678C

STITCHING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D1000

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

POUCH, STITCHING KIT0692D30005967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

2. ALL ITEMS SHALL BE PLACED INSIDE THE ZIP POUCH (0692D3000)

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

KNIFE, CRAFTSMAN'S, SQUARE POINT-1, OR -20731D00015967812

ARCH PUNCH, CUTTING, 3/8"-10720L00005967813

ARCH PUNCH, CUTTING, 1/2"-10720L00015967814

ARCH PUNCH, CUTTING, 5/8"-10720L00025967815

PUNCH, CUTTING, 1/4" HOLE-10720L00035967816

PUNCH, CUTTING, 9/32" HOLE-10720L00045967817

PUNCH, CUTTING, 11/32" HOLE-10720L00055967818

PUNCH, GROMMET SETTING, FOUR POINTS-10720L30015967819

PUNCH, FASTENER SETTING, FOUR POINTS-10720L300259678110

PUNCH, CENTER, 5/32" TIP-1, OR -20720D000359678111

PUNCH, CUTTING AND FASTENER SETTING, STEEL STUDS-10720L300459678112

11 3 4 5 6 7 8 9 10 12 2 1

1 OF 11/2

0692D100159678C

HOLE CUTTING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D1001

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

ROLL, HOLE CUTTING KIT0692D30025967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

2. TO THE MAXIMUM EXTENT POSSIBLE, LIKE ITEMS SHALL BE GROUPED TOGETHER IN THE TOOL ROLL (0692D3002)

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

PUNCH AND DIE, SPUR GROMMET INSERTING, SIZE 4-10720L10045967812

PUNCH AND DIE, SPUR GROMMET INSERTING, SIZE 5-10720L10055967813

PUNCH AND DIE, GROMMET INSERTING, SIZE 1-10720L20025967814

PUNCH AND DIE, GROMMET INSERTING, SIZE 2-10720L20035967815

PUNCH AND DIE, GROMMET INSERTING, SIZE 3-10720L20045967816

PUNCH AND DIE, GROMMET INSERTING, SIZE 4-10720L20055967817

PUNCH AND DIE, EYELET GROMMET INSERTING, 0.56"-10720L20125967818

HANDSET AND DIE, GROMMET INSERTING, 0.88" RADIUS-10720L20135967819

FASTENER ASSEMBLY PUNCH, 3/8" -10720L300059678110

PUNCH, FASTENER SETTING, DURABLE BUTTONS-10720L300359678111

RIVET SET, HAND, TINSMITH, SIZE 8 RIVETS-10720L300559678112

BENCH DIE, FASTENER SETTING, DOUBLE SIDED-10743D000059678113

BENCH DIE, FASTENER SETTING, DOT STUD #16358-10743D000259678114

SEE NOTE 2

1 2 3 4 5 6 7 8 9 10 11 13 1412

1 OF 11/2

0692D100259678C

FASTENER FORMING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D1002

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

BOX, FASTENER FORMING KIT0692D30035967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ITEMS THAT FUNCTION AS A PAIR (0720L1004, 0720L2002,

0720L2003, 0720L1005, 0720L2004, 0720L2005, 0720L2012, 0720L2013)

SHALL BE STORED AS PAIRS IN THEIR RESPECTIVE COMPARTMENTS

OF THE BOX (092D3003).

3. TO THE MAXIUMUM EXTENT POSSIBLE,

LIKE ITEMS SHALL BE GROUPED NEAR EACH

OTHER IN THE BOX (0692D3003).

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

-1

HAMMER TIP, MEDIUM HARD, 2.5"-1, OR -20721F20045967822

SEE NOTE 2

1 OF 11/2

0692D200059678C

HAMMER & TIPS ASSEMBLY

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D0000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D2000

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

HAMMER, REPLACEABLE TIP, 2.5" FACE0721F10005967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. THE HAMMER TIPS SHALL BE ASSEMBLED

TO THE HANDLE.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

-1

NEEDLE, SEWING, STRAIGHT, COARSE-10733L00155967812

1 2

SEE NOTE 2

1 OF 11/2

0692D200159678C

AWL & NEEDLE ASSEMBLY

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D1000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D2001

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

QTY.

REQ.

ITEM OR

FIND NO.

AWL, STITCHING, AUTOMATIC0733L00145967811

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. EACH NEEDLE PERTAINING TO THE AUTOMATIC

STITCHER SHALL BE STORED IN THE HANDLE.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

QTY.

REQ.

NEEDLE, SAILMAKER'S, STRAIGHT, SIZE 9-10733L00075967812

NEEDLE, SAILMAKER'S, STRAIGHT, SIZE 10-10733L00085967813

NEEDLE, SAILMAKER'S, STRAIGHT, SIZE 14-10733L00095967814

NEEDLE, GLOVER'S, SIZE 000-10733L0010596781 5

NEEDLE, GLOVER'S, SIZE 00-10733L00115967816

NEEDLE, UPHOLSTERER'S, CURVED, 3 PT SQ TIP-10733L00135967867

SEWING AWL, CURVED-10733L00125967818

SEE NOTE 2SEE NOTE 2

SEE NOTE 2

SEE NOTE 2

SEE NOTE 2

SEE NOTE 3

SEE NOTE 4

1 OF 11/2

0692D200259678C

NEEDLE & CONTAINER

ASSEMBLY

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D1000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D2002

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN NATIONAL STOCK NUMBER IF APPLICABLE

NOMENCLATURE

OR DESCRIPTION

PART NO. OR

IDENTIFYING NO.

CAGE

CODE

ITEM OR

FIND NO.

NEEDLE CONTAINER, STITCHING KIT0692D3001596781

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. IAW THE BILL OF MATERIALS BELOW, ITEMS 2,3,4,5,6 SHALL EACH

BE SUPPLIED AS A QUANTITY OF 1 PACKAGE. IAW THE DRAWINGS

FOR THOSE ITEMS (0733L0007, 0733L0008, 0733L0009, 0733L0010,

0733L0011, RESPECTIVELY) EACH PACKAGE CONTAINS 25 NEEDLES.

3. IAW THE BILL OF MATERIALS BELOW, ITEM 7 SHALL BE SUPPLIED

IN A QUANTITY OF 6 NEEDLES.

4. IAW THE BILL OF MATERIALS BELOW, ITEM 8 SHALL BE SUPPLIED

IN A QUANTITY OF 1 AWL.

5. ALL ITEMS SHALL BE PLACED INSIDE THE NEEDLE CONTAINER.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SPECIFICATIONS

TYPE TOOL POUCH

MATERIAL

COTTON DUCK, OR SIMILAR HEAVY-DUTY,

WEATHER-RESISTANT MATERIAL

CLOSURE ZIPPER

SIZE

THE POUCH SHALL BE CAPABLE OF HOUSING ALL

ITEMS LISTED IN DRAWING 0692D1000

ISO VIEW

1 OF 11/2

0692D300059678C

POUCH, STITCHING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D1000

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D3000

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SPECIFICIATIONS

MATERIAL

METAL OR

IMPACT RESISTANT PLASTIC

SIZE

THE CONTAINER SHALL BE CAPABLE OF

HOUSING ALL ITEMS LISTED IN

DRAWING 0692D2002

LID TYPE HINGED

CLOSURE

THE CASE SHALL HAVE A LATCH TO

SECURE LID WHEN CLOSED

ISO VIEW

1 OF 11/1

0692D300159678C

NEEDLE CONTAINER,

STITCHING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D2002

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D3001

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SPECIFICATIONS

TYPE TOOL ROLL OR POUCH

MATERIAL

COTTON DUCK, VINYL COATED NYLON, OR SIMILAR

HEAVY-DUTY, WEATHER-RESISTANT MATERIAL

CLOSURE

TIE OR

HOOK AND LOOP

TOOL RETENTION

THE ROLL SHALL PROVIDE A SEPARATE STORAGE

LOCATION FOR EACH ITEM LISTED IN DRAWING

0692D1001

TOOL VISIBILITY

WHEN IN THEIR RESPECTIVE STORAGE LOCATIONS,

NO LESS THAN 1/2" OF EACH ITEM SHALL BE

VISIBLE

ISO VIEW

1 OF 11/1

0692D300259678C

ROLL, HOLE CUTTING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D1001

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D3002

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

SPECIFICIATIONS

MATERIAL

METAL OR

IMPACT RESISTANT PLASTIC

SIZE

THE CASE SHALL BE CAPABLE OF

HOUSING ALL ITEMS LISTED IN

DRAWING 0692D1002

THE CASE SHALL FIT INSIDE THE

TOOLBOX CHOSEN FROM DRAWING

0700C0001, ALONG WITH ALL ITEMS

LISTED IN DRAWING 0692D0000.

LID TYPE HINGED

CLOSURE

THE CASE SHALL HAVE A LATCH TO

SECURE LID WHEN CLOSED

TOOL RETENTION

THE CASE SHALL PROVIDE SEPARATE

ACCOMMODATION FOR EACH ITEM

LISTED IN DRAWING 0692D1002

1 OF 11/2

0692D300359678C

BOX, FASTENER

FORMING KIT

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-08-05K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

CWTK0692D1002

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

PART NO. 0692D3003

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

NSN (NATIONAL STOCK NUMBER)

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(L) (W)

(H)

TYPE TOOL BOX, REMOVEABLE TRAY

MATERIAL STEEL

CLOSURE HANDLES OR LATCH SHALL

ACCOMMODATE A PADLOCK

WIDTH (W) 8.5 INCHES NOMINAL

HEIGHT (H) 8.5 INCHES NOMINAL

0700C0001-2

STANLEY PROTO INDUSTRIAL TOOLS

2195 EAST VIEW PARKWAY

CONYERS, GA 30013

1CV05 J9975R

20" GENERAL PURPOSE,

SINGLE LATCH TOOL BOX

ISO VIEW

0700C000159678C

TOOL BOX, HAND CARRY,

REMOVABLE TRAY, 21"

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-04-08K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

LENGTH (L) 20.5 INCHES NOMINAL

OTHER FEATURES INCLUDES REMOVEABLE TRAY

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0700C0001-1

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143-5656

55719 KRA25D

BOX, REMOVEABLE TOTE TRAY,

20-7/8" x 8-3/4" x 8-3/4"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE PADLOCK WITH CHAIN

APPLICABLE STANDARDS CID AA59487-1BCS

0700J0000-2

PACIFIC LOCK COMPANY

25605 HERCULES ST

VALENCIA, CA 91355-5051

1E3D8 5340-00-682-1508 PADLOCK, SOLID BRASS, 9" CHAIN

ISO VIEW

0700J000059678C

PADLOCK, SOLID BRASS,

9" CHAIN

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-08K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART NO. VENDOR DESCRIPTION

0700J0000-1

MASTER LOCK COMPANY

6744 S HOWELL AVE

OAK CREEK, WI 53154-1422

38797 ASL40NBSBC PADLOCK, SOLID BRASS, 9" CHAIN

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

0712B0003-4

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 79104

SLOTTED SCREWDRIVER -

3/8" X 8" KEYSTONE

0712B0003-5

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 PKRB8CR

SCREWDRIVER, FLAT TIP,

3/8", HEX BOLSTER, 8"

BLADE

( )3/8

(L)

1 OF 10.0001/2

0712B000359678C

SCREWDRIVER, FLAT TIP,

3/8", HEX BOLSTER,

8" BLADE

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-07-17J. MILLER

J. MILLER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

TYPE FLAT TIP SCREWDRIVER

BLADE LENGTH (L) 8 INCH NOMINAL

TIP SIZE .375 (3/8) INCH

MATERIAL

BLADE: STEEL

HANDLE: TWO-MATERIAL OR

TEXTURE

SINGLE-PIECE-DESIGN

FINISH

BLADE: FULL POLISH CHROME

TIP: TREATED TO PREVENT

CHIPPING

SPECIAL FEATURES

HEX BOLSTER; GENERAL

PURPOSE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR

PART NO.

VENDOR DESCRIPTION

0712B0003-1 -REMOVED

0712B0003-2

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 SHD8R

SCREWDRIVER, FLAT TIP,

INSTINCT HARD HANDLE,

RED, .055"

0712B0003-3

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 JKB3808RP

SLOTTED KEYSTONE ROUND

BAR SCREWDRIVER - 3/8" X

8"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

HEX BOLSTER

ISO VIEW

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(L)(H)

TYPE NUT DRIVER

BLADE MATERIAL STEEL

HANDLE MATERIAL PLASTIC

HEX SIZE (H) 1/2 INCH

SURFACE TREATMENT CHROME PLATED

0712F1006-2

STANLEY PROTO INDUSTRIAL TOOLS

2195 EAST VIEW PARKWAY

CONYERS, GA 30013

1CV05 JN1204R 1/2" DURATEK NUT DRIVER

0712F100659678C

NUT DRIVER, 1/2"

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-08K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

LENGTH (L) 8 INCHES NOMINAL

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0712F1006-1

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143-5656

55719 NDD116BR 1/2" RED NUT DRIVER

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(T)

(W)

TYPE STUD FASTENER, SCREWDRIVER TYPE

HANDLE MATERIAL WOOD OR PLASTIC

BLADE MATERIAL STEEL

HANDLE LENGTH 5 INCHES NOMINAL

TIP WIDTH (W) 0.406 INCHES

OTHER BLADE ENCLOSED IN

5/8 INCH DIA STEEL SLEEVE

ISO VIEW

SECTION X-X

0712H000259678C

STUD FASTENER,

FLAT TIP SCREWDRIVER

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-02K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

TIP THICKNESS (T) 0.032 INCHES

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0712H0002-1

TIMBER EDGE MACHINE INC

843 N BURNT FORK RD

STEVENSVILLE, MT 59870-6653

0FKL0 TE-7798

SCREWDRIVER, FLAT TIP

(AND STUD FASTENER)

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(H)

TYPE STUD FASTENER, SCREWDRIVER TYPE

HANDLE MATERIAL WOOD OR PLASTIC

BLADE MATERIAL STEEL

HANDLE LENGTH 5 INCHES NOMINAL

HEX WIDTH (H) 0.365 INCHES

OTHER FOR USE WITH LIFT-THE-DOT SCREW STUDS

ISO VIEW

0712H000359678C

STUD FASTENER,

HEX TIP SCREWDRIVER

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-02K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0712H0003-1

MORITO SCOVILL AMERICAS, LLC

1802 SCOVILL DR

CLARKESVILLE, GA 30523-6348

13940 169B

SCREWDRIVER #169B

FOR LIFT-THE-DOT STUDS

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-10-20ERR K17O3009A

0714E0002-3

WILLIAMS J H INDUSTRIAL

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 AP-8A 8" ADJUSTABLE WRENCH

0714E0002-4

WILDE TOOL CO., INC.

1210 POTTAWATOMIE ST

HIAWATHA, KS 66434-0000

20705 AWC8/CS

8" ADJUSTABLE

WRENCH-PLATED, JAW

CAPACITY 1-1/8", OAL: 8"

0714E0002-5

S K HAND TOOL LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 8008 8" ADJUSTABLE WRENCH

0714E0002-6

WRIGHT TOOL CO

1 WRIGHT DRIVE

BARBERTON, OH 44203-2748

79808 9AC08 8" ADJUSTABLE WRENCH

(L)

1 OF 11/1

0714E000259678C

WRENCH, ADJUSTABLE,

1-1/8 X 8"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2016-06-08V. VONDERA

2016-06-08B. VERMULM

K. ROESERJ. MILLER

2015-11-05K. ROESER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2016-06-08 PRODUCT BASELINE - ERR K16O3009-

SPECIFICATIONS

TYPE ADJUSTABLE WRENCH

LENGTH (L) 8 INCH NOMINAL

JAW CAPACITY 1-1/8 INCH MIN

FINISH CHROME

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.100 (B107.8),

TYPE II

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR

PART NO.

VENDOR DESCRIPTION

0714E0002-1 -REMOVED

0714E0002-2

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J708L

SATIN CLIK-STOP

ADJUSTABLE WRENCH 8"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

ISO VIEW

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

VEV2017-06-02ERR K17O3003A

LENGTH (L) 5.0 TO 7.0 INCHES

0718A1001-5

AMERICAN KAL ENTERPRISES, INC.

DBA PRO AMERICA PREMIUM TOOLS

4265 PUENTE AVE

BALDWIN PARK, CA 91706-3420

60043 7006 6" SLIP JOINT

0718A1001-6

CHANNELLOCK INC

1306 S MN ST

MEADVILLE, PA 16335-3035

71612 526 6.5" SLIP JOINT PLIER

0718A1001-7

WILDE TOOL CO., INC.

1210 POTTAWATOMIE ST

HIAWATHA, KS 66434-0000

20705 G262P

6-1/2" SLIP JOINT

PLIERS-GRIPPED

0718A1001-8

STANLEY BLACK & DECKER, INC.

DBA MAC TOOLS

505 N CLEVELAND AVE STE 200

WESTERVILLE, OH 43082-7130

76377 M526G

PLIERS, SLIP JOINT,

COMBINATION JAW, 6"

0718A1001-9

WILLIAMS J H INDUSTRIAL

PRODUCTS INC

6969 JAMESSON RD

COLUMBUS, GA 31908

8Z799 PL-6C

COMBINATION SLIP-JOINT

PLIERS - 6"

(L)

1 OF 10.0001/1

0718A100159678C

PLIERS, SLIP JOINT,

COMBINATION JAW, 6"

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2015-10-26V. VONDERA

2015-10-26J. MILLER

J. MILLERB. VERMULM

2015-07-27J. MILLER

M. ANDRINGA

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2015-10-26 PRODUCT BASELINE - ERR K15O3007-

SPECIFICATIONS

TYPE

COMBINATION SLIP JOINT

PLIERS

SIZE 6 INCH NOMINAL

JAW POSITIONS 2 MIN

SPECIAL FEATURES

COMBINATION JAW;

STRAIGHT NOSE; SERRATED

JAWS; REGULAR STYLE;

COMFORT GRIPS ON HANDLES

APPLICABLE

SPECIFICATIONS/STANDARDS

ASME B107.500 (B107.23),

TYPE II, CLASS 1, STYLE A

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR

PART NO.

VENDOR DESCRIPTION

0718A1001-1 -REMOVED

0718A1001-2

SK HAND TOOL, LLC

1600 SOUTH PRAIRIE DRIVE

SYCAMORE, IL 60178

6RYA2 7206

6" COMBINATION (SLIP

JOINT) PLIERS

0718A1001-3

SNAP-ON INDUSTRIAL

2801 80TH ST

KENOSHA, WI 53143

55719 46ACF

PLIERS, COMBINATION SLIP

JOINT, 6"

0718A1001-4

STANLEY PROTO INDUSTRIAL

2195 E VIEW PKWY STE 103

CONYERS, GA 30013

1CV05 J276G

COMBINATION SLIP-JOINT

PLIERS W/GRIP - 6-9/16"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

AND IS CAD MAINTAINED. CHANGES SHALL BE

INCORPORATED BY THE DESIGN ACTIVITY.

ISO VIEW

SHOWN OPEN

COMFORT GRIPS

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE SHEARS, BENT TRIMMERS

MATERIAL CARBON STEEL

CUT LENGTH 6-3/4 INCHES NOMINAL

TRADE SIZE 12 INCH

ISO VIEW

0718H000059678C

SHEARS, BENT TRIMMERS,

12" LENGTH

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-04-09K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

SURFACE FINISH CHROME

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0718H0000-1

KLEIN TOOLS INC

LINCOLNSHIRE, IL 60069-1418

75347 GP212LR

BENT TRIMMER WITH LARGE RING,

12 INCH

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

(L)

(B) (T)

TYPE CENTER PUNCH

LENGTH (L) 4 INCHES NOMINAL

BODY SIZE (B) 3/8 INCHES NOMINAL

TIP SIZE (T) 5/32 INCHES NOMINAL

MATERIAL STEEL ALLOY

0720D0003-2

L.S. STARRETT COMPANY

121 CRESCENT ST

ATHOL, MA 01331-1913

57163 50486

CENTER PUNCH

WITH ROUND SHANK, 5/32

ISO VIEW

0720D000359678C

PUNCH, CENTER,

5/32" TIP

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-09K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

OTHER FEATURES KNURLED GRIP

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0720D0003-1

MAYHEW STEEL PRODUCTS INC

2 SEARS ST EXT

SHELBURNE FALLS, MA 01370

39068 24301 3/8" KNURLED CENTER PUNCH

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE ARCH PUNCH

MATERIAL CARBON STEEL

SIZE 3/8 INCH

ISO VIEW

0720L000059678C

ARCH PUNCH,

CUTTING, 3/8"

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-02K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

OTHER FEATURES

POLISHED BARREL;

HARDENED CUTTING EDGE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0720L0000-1

C. S. OSBORNE AND COMPANY

125 JERSEY ST

HARRISON, NJ 07029-1700

76970 149 3/8 ARCH PUNCH, 3/8"

PART NO. SEE TABLE

THIS DRAWING WAS GENERATED FROM A SOLID MODEL

D

D

C

B

A

CONTRACT NUMBER

DAISIZE

SCALE UNIT WT.

DESIGN ACTIVITY

CONTRACTOR

DRAWN BY DATE(YEAR-MO-DA)

CHECKER ENGINEER

ENGINEER QUALITY ENGINEER

DRAWING APPROVAL

DESIGN APPROVAL

B

MODELED BYMATL ENGR

SHEET

TOLERANCE ON ANGLES �#� �$�

DWG NO.DISTRIBUTION STATEMENT A. APPROVED

FOR PUBLIC RELEASE; DISTRIBUTION IS

UNLIMITED.

NOTES

1. APPLICABLE STANDARDS/SPECIFICATIONS:

A. ASME Y14.100-2013

B. ASME Y14.5-2009

2. ONLY ITEMS DESCRIBED ON THIS DRAWING

ARE APPROVED FOR USE IN THE APPLICATIONS

SPECIFIED HEREON. A SUBSTITUTE ITEM SHALL

NOT BE USED WITHOUT PRIOR APPROVAL BY

THE QUALIFYING ACTIVITY.

3. IDENTIFICATION OF THE APPROVED SOURCE(S)

OF SUPPLY HEREON IS NOT TO BE CONSTRUED

AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR

THE ITEM DESCRIBED ON THE DRAWING.

SOURCE CONTROL DRAWING

TYPE ARCH PUNCH

MATERIAL CARBON STEEL

SIZE 1/2 INCH

ISO VIEW

0720L000159678C

ARCH PUNCH,

CUTTING, 1/2"

US ARMY

COMBAT CAPABILITIES DEVELOPMENT COMMAND, ARMAMENTS CENTER

ROCK ISLAND, ILLINOIS 61299-5000

2019-09-10V. VONDERA

2019-09-10J. MILLER

K. ROESERB. VERMULM

2019-05-02K. ROESER

K. ROESER

THIRD ANGLE PROJECTION

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

DO NOT SCALE DRAWING

APPLICATION

USED ONNEXT ASSY

MULTIPLEMULTIPLE

PMIC

MECHANICAL

PROPERTIES

YP

TS

EL2

RA

BH

RH

REVISIONS

APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONREVISION

VEV2019-09-10PRODUCT BASELINE - ERR K19O3008-

SPECIFICATIONS

OTHER FEATURES

POLISHED BARREL;

HARDENED CUTTING EDGE

APPROVED SOURCE(S)

PART NO.

VENDOR DATA

NAME & ADDRESS

CAGE

CODE

VENDOR PART

NO.

VENDOR DESCRIPTION

0720L0001-1

C. S. OSBORNE AND COMPANY

125 JERSEY ST

HARRISON, NJ 07029-1700

76970 149 1/2 ARCH…