Tab-D AMIM-MLR-25-005-Vactor Truck Specifications.pdf
PDF 73 KB Posted
- Attached to
- VACTOR TRUCK RENTAL WEST POINT FY26
- Solicitation number
- W911SD26RA001
About this file
This document is a Vactor Truck Purchase Specifications guide that establishes minimum technical requirements for a debris collection vehicle system. The specifications are organized into eight categories covering all major truck systems and components.
The Debris Body & Dump System must feature steel construction with minimum 50,000 psi yield strength, a 15 cubic yard (3,000 gallon) capacity, double-acting hydraulic dump hoist, full-opening rear door with neoprene sealing, and hydraulic door cylinders. Additional requirements include a body flush-out system capable of ≥2,500 psi @ 60 gpm with 8+ nozzles, piping rated to 3,000 psi operating pressure, an 8-inch decant capability with air-operated relief valve, and a float-type automatic shutoff system. The Water Tank System must include an aluminum tank with ≥1,500-gallon capacity, float-level system, anti-siphon device with 25-foot hydrant fill hose, low water alarm activating at 150 gallons, and air purge system. The Vacuum & Boom System requires electronic blower control, front-mounted vacuum hose storage, boom mounted to chassis with directional controls and emergency shutdown, plus a cab protection device. The Pumping & Hose Equipment specification calls for an 800+ gpm 4-inch submersible trash pump, 4-inch x 35-foot drain hose with curbside controls, and 25-foot x 1-inch leader hose. Additional systems include pipe storage racks with quick releases, a 450 HP engine with automatic transmission and compression-release brake, comprehensive safety and lighting equipment (backup alarm, beacon lights, LED work lights, emergency flare kit, fire extinguisher, tow hooks), and optional toolboxes and accessories such as aluminum fenders and mud flaps.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vactor Truck Purchase Specifications
All components must meet or exceed the following minimum specifications.
I. Debris Body & Dump System
1. Steel construction with minimum 50,000 psi yield and 70,000 psi tensile strength
2. Debris body capacity: 15 cubic yards / 3,000 gallons
3. Double-acting hydraulic dump hoist
4. Dumping must maintain fixed hopper pivot point to subframe
5. Full-opening rear door, top-hinged, neoprene-type sealed
6. Hydraulic door cylinders mounted at top of body
7. Door must open at least 50° from closed position
8. Failsafe hydraulic door locking system with controls behind cab
9. Debris body deflector plate
10. Curbside dump/accessory controls behind cab
11. Splash shield around outer hopper door
12. Lubrication manifold system
13. 8” decant capability with air-operated relief valve
14. Body flush-out system: ≥2,500 psi @ 60 gpm, 8+ nozzles, front wall manifold
15. Piping and valves rated to 3,000 psi operating pressure
16. Float-type automatic shutoƯ system for blower protection
II. Water Tank System
1. Aluminum tank with float-level system; ≥1,500-gallon capacity
2. Tank supported separately from debris body
3. Anti-siphon device with 25’ hydrant fill hose and fittings
4. Low water alarm (activates at 150 gallons) with cab light
5. Air purge system to clear high-pressure water lines
III. Vacuum & Boom System
1. Blower electronically controlled at front operator station
2. Front-mounted vacuum hose, stored at workstation
3. Hose remains fixed during dumping
4. Quick clamps for pipe joints (10+ provided)
5. Boom mounted to chassis
6. Boom control station with directional controls and emergency shutdown
7. Cab protection device
IV. Pumping & Hose Equipment
1. 800+ gpm 4" submersible trash pump (externally mounted, forward wall)
2. 4” x 35’ drain hose with curbside controls
3. 25’ x 1” leader hose
V. Pipe Storage & Racks
1. Two curbside pipe racks (waist level) with quick releases
2. Two rear-door pipe racks with quick releases
3. Spring-assisted street-side folding 3-pipe rack with quick-release handles
VI. Chassis Specifications
1. 450 HP engine
2. Automatic transmission
3. Compression-release engine brake
VII. Safety & Lighting Equipment
1. Electronic backup alarm
2. Amber beacon light (rear)
3. Amber beacon light (cab guard)
4. LED work lights (operator’s station & boom)
5. Split flashing arrow lights (rear door)
6. Emergency flare kit
7. Fire extinguisher
8. Front and rear tow hooks
9. Hand light with reel
VIII. Toolboxes & Accessories (Optional)
1. 48” x 22” x 24” aluminum toolbox (passenger side, weatherproof, lockable)
2. 16” x 12” x 18” front bumper toolbox
3. 14” x 36” x 96” toolbox
4. 18” x 24” x 24” toolbox
5. Aluminum fenders
6. Mud flaps
7. Package of 1” jet nozzles
File details come from the government source that posted it. Updated .