TAB 12 REQUEST FOR QUOTE _70Z08526Q40015B00.docx

REQUEST FOR QUOTE #70Z08526Q40015B00.

QUOTE DUE NLT: 2/5/2026, 1 PM EST.

ITEM REQUIRED DELIVERY DATE: 6/14/2026.

NAICS 333618

(i) This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.

(ii) Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016.

(iii) It is anticipated that a competitive price purchase order shall be awarded because of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency.

(iv) Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.

(v) All acquisitions expected to exceed $10k can also be found on SAM.GOV under the same solicitation/RFQ listed in the header.

(vi) The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.

(vii) The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items:

Vendor shall provide:

VENDOR NAME:

VENDOR UEI:

ALL ITEMS LISTED IN THE BELOW PARTS LIST AND NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS.

If unable to meet required delivery date provide DD: _______ PRESERVATION, PACKAGING & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS OUTLINED IN PREPARATION FOR DELIVERY BELOW:

P/N: 1253040

FILTER ELEMENT, FLUID

END ITEM: WMSLS BOAT HANDLING STERN RECOVERY CRANE SYSTEM, APPLETON MARINE AMD-2367 INDIVIDUALLY PACKAGED AND LABELED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX.

P/N: 1253080

NAME ITEM NAME FILTER ELEMENT, FLUID

FILTRATION RATING IN MICRONS 5.0 NOMINAL

END ITEM IDENTIFICATION CRANE ASSEMBLY P/N AMD-2367

FEAT SPECIAL FEATURES BETAMICRON

END USE: WMSL STERN CRANE APPLETON MARINE, AMD-2367

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE AFFECTED BY HEAT-SEALING,

ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND

OTHERS ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH

TYPE II OR III OF MIL-D-3464.

MARKING IAW MIL-STD-129R & BAR CODING IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY.

SEAL KIT (DFP80), P/N: 305018

THE FOLLOWING ITEMS ARE CONTAINED IN THE KIT.

BACK UP RING (BOWL), P/N: DF 160

OIL DRAIN PLUG, P/N: G ?

O-RING (BOWL), P/N: 80X4

O-RING (ELEMENT), P/N: 34X3

O-RING, FLANGE, P/N: 24X2.5

O-RING (INDICATOR), P/N: 15X1.5

PROFILE SEAL RING (INDICATOR), P/N: VD

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING.

OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE.

PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-

3464.MARKING IAW MIL-STD-129R

END ITEM IDENTIFICATION CRANE ASSEMBLY; AMD-2367;70433

- NO SUBSTITUTIONS.

☐Quality Assurance Q/A Inspection, if this block is checked, the contractor shall be responsible for notifying the Contracting Officer at least seven (07) calendar days prior to the contractor being ready for any Q/A inspections or testing as required.

Are you able to meet packaging requirements? Yes, ___ No ____ ** Total cost shall have delivery and any Freight charges to zip code 21226 included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

SHIP TO:

USCG SURFACE FORCES LOGISTICS CENTER

2401 HAWKINS POINT ROAD

RECEIVING ROOM- BUILDING 88

BALTIMORE, MD 21226

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for example in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm.

Please make sure that any changes in Delivery Timeframes or tracking information get sent to

U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING

· NATIONAL STOCK NUMBER (NSN)

· ITEM NAME

· PART NUMBER

· PURCHASE ORDER NUMBER

· THE WORDS “COAST GUARD SFLC MATERIAL” CONDITION (A)

· QUANTITY AND UNIT OF ISSUE (I.E) (1-EA)

Invoicing In IPP

It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: JERMAINE.T.PERKINS@uscg.mil