TAB 12 70Z08525Q30022B00 SOLICITATION.docx

REQUEST FOR QUOTE #70Z08526Q30022B00.

QUOTE DUE NLT: 01/26/2026, 1 PM EST.

ITEM REQUIRED DELIVERY DATE: 03/15/2026.

NAICS: 339991

Vendor shall provide:

VENDOR NAME:

VENDOR UEI:

ALL ITEMS LISTED IN THE BELOW PARTS LIST AND NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS.

If unable to meet required delivery date provide DD: ________

DESCRIPTIVE/

SPEC DATA:

1) FILTER REPLACEMENT KIT, WALKER PART NUMBER: 1001860

OIL MIST FILTER,

W/ O-RINGS (SINGLE PACK).

DIRECT REPLACEMENT - SAME FORM, FIT, FUNCTION, TO SERVICE USCG WIMSL MDE'S EQUIPPED

WITH CCE AIRSEP. SERVICE AIRSEP KIT NUMBER, KWCCEMTU20V1163-2R AND AIRSEP PART

NUMBER, 1001750. FIELD SERVICE KIT USED TO REPLACE THE FILTER ELEMENTS ON THE

CRANKCASE BREATHER. END USE IS 418' WMSL CUTTERS

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING,

ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND

OTHERS ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH

TYPE II OR III OF MIL-D-3464. MARKING IAW MIL-STD-129R

2) AIR SEP LID, GASKET, 16INCH CAN

Part#: 40-1023 INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-LE METHOD 10, PACKED IN AN APPROPRIATELY SIZED ASTM-DS 118 DOUBLE-WALL FIBERBOARD BOX. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY.

POC for equipment inquiries:

CWO John Kane John.G.Kane@uscg.mil

(410) 762-6039 ☐Quality Assurance Q/A Inspection, if this block is checked, the contractor shall be responsible for notifying the Contracting Officer at least seven (07) calendar days prior to the contractor being ready for any Q/A inspections or testing as required.

Are you able to meet packaging requirements? Yes ___ No ____ ** Total cost shall have delivery and any Freight charges to zip code 21226 included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

SHIP TO:

USCG SURFACE FORCES LOGISTICS CENTER

2401 HAWKINS POINT ROAD

RECEIVING ROOM- BUILDING 88

BALTIMORE, MD 21226

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for example in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All materials shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm.

Please make sure that any changes in Delivery Timeframes or tracking information get sent to John.G.Kane@uscg.mil

U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING

· NATIONAL STOCK NUMBER (NSN)

· ITEM NAME

· PART NUMBER

· PURCHASE ORDER NUMBER

· THE WORDS “COAST GUARD SFLC MATERIAL” CONDITION (A)

· QUANTITY AND UNIT OF ISSUE (I.E) (1-EA)

· CONTRACT NUMBER/ ORDER NUMBER

Invoicing In IPP

It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: Carlos.A.DiazGarcia@uscg.mil