Tab 04 SOW.pdf

STATEMENT OF WORK

1. Objective/Requirements

This requirement is for the acquisition of the Thermtest Upgrade for NASA Langley Research Center (LaRC). The information listed below is required to complete this purchase.

2. Characteristics, Scope, and Specs

QTY PART # DESCRIPTION

1 30001P001-00 Measurement Platform 1 (MP-1)

Next generation instrument, designed for measurement of thermophysical properties, the MP-1 offers multiple sensor and temperature options depending on your sample type. Central design is for the use of primary purpose sensors to maximize accuracy and sample type flexibility. The expandable platform allows auto-switching between sensors and temperature devices for testing multiple samples at the same time.

Specifications:

High sensitivity controller, with Wheatstone Bridge Touch-screen with testing status Built in 4-channel sensor switch:

1-Room temperature sensor channel 3-Multi-type channels for sensors or temperature devices Windows MP-1 software packages; Testing and Analysis Testing. Full control of testing and temperature. Analysis. Smart results processing and report functions.

*Requires Windows 10 computer Online Training and Support from Thermtest Service Engineer 1 year Warranty

Methods Available:

1. Transient Plane Source (TPS) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat of solids, pastes & powders from 0.005 to 1800 W/mK.

ISO 22007-2

2. Transient Hot Wire (THW) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat of liquids, pastes & powders from 0.01 to 2 W/mK.

ASTM D7896

3. Transient Line Source (TLS) Method for testing the thermal conductivity of soil, plastics, soft and rigid materials from 0.1 to 8 W/mK. ASTM D5334-22a, ASTM D5930-

17, IEEE 412-2017

4. Transient Hot Strip (THS) testing the absolute thermal conductivity, thermal diffusivity, specific heat of solids from 0.1 to 500 W/mK.

Includes:

MP-1 Controller

- 1 20 VAC (60 Hz) 1 A or 230 VAC (50 Hz, 60 Hz) 1 A

- 4 32 mm [17 in] x 610 mm [24 in],

20.34 kg [44.83 lbs]

USB Key with DAQ, TA Software Applications, License Information, Manuals Protective Mat USB Cable Power Cable 1 Year Warranty

1 30003P001-00 Transient Plane Source (TPS) Method

Transient Plane Source (TPS) Method for testing the absolute thermal conductivity, thermal diffusivity, specific heat, thermal effusivity of solids, pastes & powders from

0.005 to 1800 W/mK. ISO 22007-2

Specifications:

Materials: Solids, Pastes, Powders and Viscous Liquids Accuracy: 5% Repeatability: 2% Sample Configuration: Symmetric and Asymmetric Temperature: Room Temperature

Expanded Temperatures with Temperature Platforms:

TPS-TP-1: 0 to 300C TPS-TP-2: -20 to 300C TPS-TP-3: -45 to 300C TPS-TP-4: -160 to 300C Expanded (Furnace): up to 750C / 1000C Sensor Contact Resistance: Measured, m^2K/W *Thermal Conductivity : 0.005 to 1800 W/mK Additional properties: Thermal Diffusivity, Volumetric Specific Heat, Thermal Effusivity and Sensor - Sample Contact Resistance Test Time (s): 0.25 to 1280 Seconds Data-Point Collection (points): 400 to 600 *Sample Size: 5 x 5 mm to unlimited *Sample Thickness: 0.001 mm to unlimited Sample Configuration: Symmetric (Double- Sided) and Asymmetric (Single-Sided) Standard: ISO 22007-2

*Based on testing module used.

TPS Testing Module Groups Three-Dimensional TPS Module Group:

1. Standard - bulk, three dimensional thermophysical properties (0.01 to 1000 W/mK). Included.

2. Anisotropic, directional (axial and radial) thermophysical properties (0.005 to 500 W/mK). Optional.

3. Slab (avg radial), thermophysical properties of thermally conductive sheets (0.1 to 1800 W/mK) Optional.

4. Specific Heat, direct measurement.

Optional.

5. Thin-Film and Coatings (0.01 to 1 mm,

0.01 to 1 W/mK).

Optional.

One-Dimensional TPS Module Group:

1. Standard - 1D (0.1 to 1800 W/mK).

Optional.

2. Thermal Resistance Thin-film and coatings (0.001 mm to 1 mm, 0.005 to 5 W/mK). Optional.

3. Transient Thermal Resistance - Contact Resistance (TR-CR), for measuring thermal contact resistance between two objects.

Optional Includes:

TPS Standard - Bulk Module for measurement of low to high thermal conductivity materials.

Thermal Conductivity: 0.01 to 1000 W/mK Additional properties: Thermal Diffusivity, Volumetric Specific Heat, Thermal Effusivity and Sensor - Sample Contact Resistance Accuracy: 5% Repeatability: 2% Smallest Sample: 5 x 5 x 1 mm Largest Sample: unlimited Stainless Steel 304 Verification Material One (x1) TPS Sensor (6.4 mm radius) -Several radii available based on sample size (0.5 to 30 mm).

XPS Insulation for Asymmetric Testing Room Temperature Sensor Adaptor -Can be upgraded to TPS High Temperature Sensor Adaptor (300C) for use in standard furnace.

TPS Sample Holder with Cover: sample size up to 100 x 100 x 50 mm

1 30003P002-00 TPS 3D Anisotropy

The Anisotropy Module allows you to measure axial and radial thermal conductivity

- thermal diffusivity of anisotropic materials.

Specifications TC: 0.005 - 500 W/mK in both axial and radial direction to the sensor plane Additional properties: Thermal Diffusivity- Sample Contact Resistance Cp: Specific Heat Required (it is easily found with the Specific Heat Capacity Module)

Accuracy: 5% Repeatability: 2% Smallest Sample: 10 x 10 x 1 mm Largest Sample: unlimited

1 30003P003-00 TPS 3D Slab

The Slab Module is suitable for measurements on low to extremely high conducting materials such as stainless steel, carbon steel, aluminum, copper, silicon wafers, etc.

Specifications TC: 0.1 - 1800 W/mK Additional Properties: Thermal Diffusivity and Volumetric Specific Heat Accuracy: 5% Repeatability: 2% Smallest Sample: 15 x 15 x 0.06 mm Largest Sample: unlimited

1 30003P015-00-DNU MP-1 with TPS: Slab Anisotropic Module

The Slab - Anisotropic Module allows measurement of axial and radial thermal conductivity - thermal diffusivity and volumetric specific heat of sheet form anisotropic materials. No input of volumetric specific heat required.

Specifications:

Thermal Conductivity: 0.5 - 500 W/mK in both axial and radial direction to the sensor plane Accuracy: 4% Repeatability: Typically < 1 % Additional properties: Thermal Diffusivity, Volumetric Specific Heat Sensor Contact Resistance: Measured, m^2K/W *Smallest Sample: 10 x 10 mm Largest Sample: x-y (unlimited) x 0.3 to 10 mm thick Sample Configuration: Symmetric and Asymmetric Temperature Range: Room Temperature

*Optional range from -75 to 300C.

Includes:

Slab - Anisotropic Module License *Requires Anisotropic and Slab Polyimide (Anisotropic) Verification Materials Insulation XPS Foam (Max 90C) Calcium Silicate (Max 300C) sized for TPS-

TP

1 30003P004-00 TPS 1-D + 1-D Slab Module

The 1-Dimensional (1-D) Module is specially designed for elongated rods or shapes.

Included with 1-D is the new 1-D Slab.

Which measures shorter cylinders for thermal conductivity, thermal diffusivity and volumetric specific heat (vCp).

1-D Specifications:

Thermal Conductivity: 0.1 - 2000 W/mK along the length of a tall cylinder.

Additional properties: Thermal Diffusivity, Sample Contact Resistance *Input of vCp required, if not known it can be measured with TPS Specific Heat Module Sensor Contact Resistance: Measured, m2K/W TC Accuracy: 4% TC Repeatability: Typically, < 1% Standard Sample Diameter: 21 mm Minimum Sample Size: 4 mm diameter Maximum Sample size: 70 mm diameter Thickness: 3 to 100 mm Sample Configuration: Symmetric and Asymmetric Standard: ISO 22007-2 & ISO 22007-7

1-D Slab Specifications:

Thermal Conductivity: 0.5 - 500 W/mK along the length of a short cylinder.

Additional properties: Thermal Diffusivity and Volumetric Specific Heat Sensor Contact Resistance: Measured, m2K/W Accuracy: 4% Repeatability: Typically, < 1%

Standard Sample Diameter: 21 mm Minimum Sample Size: 4 mm diameter Maximum Sample size: 70 mm diameter 1-D Slab Thickness: 0.3 to 10 mm Sample Configuration: Symmetric and Asymmetric (above 3 W/mK)

Includes:

1-D + 1-D Slab Modules TPS-K-DS: 4647-1 (9.9 mm radius) SS 304 Verification Materials Backing XPS (-75 to 60C) 21 mm (10 pieces)

1 30003P005-00 Thermal Resistance based thermal conductivity of free standing thin-films, adhesives and coatings.

Specifications:

1-D TR-TF

Thermal Resistance & Thermal Conductivity:

0.005 - 5 W/mK Thickness: 0.001 to 1 mm Sample Size: 21 mm diameter Sample Configuration: Symmetric Sensor Contact Resistance: Measured, m^2K/W Accuracy: 4% Repeatability: Typically < 1% Temperature: Room Temperature *Can be configured for temperature range.

Includes:

1-D Thin-Film Module License TPS-K-DS Double Spiral Sensor: 4647-1 SS 304 Connecting Materials (A + B) Digital Thickness Gauge Alignment Fixture & Weight (5kg) for use on standard sample holder for applying constant pressure of 10 PSI.

1 30003P006-00 TPS Specific Heat Module

The Specific Heat Module is suitable for measurements on all solid/semi-solid materials. The measurements are made in a specially designed test cell, which is insulated to eliminate heat loss. The sample should have one flat contact surface.

Specifications:

Temperature: Room temperature or -160 to 80C (requires temperature chamber) Accuracy: 4% Repeatability: Typically, < 1% Standard Test Cell: 20 mm diameter x 5 mm high

Includes:

Specific Heat Module Specific Heat No Cell Module Cp Cell: 20 mm diameter x 5 mm high (Room Temperature) Verification Material

1 17171 TPS-K Double Spiral Sensor: 17171 New generation polyimide for better high temperature performance.

no cable (-160C to 300C) Radius: 2 mm

1 2117-1 TPS-K Double Spiral Sensor: 21171 New generation polyimide for better high temperature performance.

no cable (-160C to 300C) Radius: 3.2 mm

1 29001P004-00 TPS-TP-4 Temperature Platform with LN2 Control System

The unique proprietary small foot-print temperature platform (TP) is the first of its kind, allowing fast, and accurate automated control of temperature. With the TPS-TP, a full understanding of thermal conductivity vs temperature can be realized.

Specifications:

Temperature: -160C to 300C Temperature stability: 0.1C Maximum sample size: 40 mm diameter x 20 mm thick Oven for larger samples available.

Cell gas purge to control moisture & protect sample Available TP test cells for liquids, powders, pastes and polymer melts.

Includes:

TPS-TP-4 Temperature Platform: -160C to 300C LN2 Control System Male to Male LEMO Connecting Cable to MP-1 Controller

- Power: 120 VAC (60 Hz) 4 A or 230 VAC (50 Hz, 60 Hz) 4 A

- Dimensions: 279 mm [11 in] x 610 mm [24 in], 17.78 kg [39.19 lbs] HT (Calcium Silicate) Foam pieces Red Seal for Powders Hex Driver (3/32 in), Sample Gauge, Handi Vac, Tweezers, Extra Screws, Digital Caliper, Sample Protector Disk USB & Power Cable

1 30003P012-00 Transient Hot Strip (THS) Method

Transient Hot Strip (THS) Method for testing the absolute thermal conductivity, thermal diffusivity, and specific heat of solids (elongated strip shape).

Specifications:

Materials: Solid Rectangles Thermal Conductivity: 0.1 to 500 W/mK Additional properties: Thermal Diffusivity and Specific Heat Sensor Contact Resistance:

Measured, m2K/W TC Accuracy: 5% TC Repeatability: 2% Sample Configuration: Symmetric and Asymmetric Sample Size: 30 (fixed) x 10 mm Sample Thickness: 0.1 mm to unlimited Sample Configuration: Symmetric (Double- Sided) and Asymmetric (Single-Sided) *Based on testing module used, see sensor

Optional THS Modules:

1. Anisotropic, directional (axial and 90 degrees to axial) thermophysical properties (0.1 to 500 W/mK).

2. Slab (along length), thermophysical properties of thermally conductive strips (0.1 to 1800 W/mK).

Includes:

THS Bulk Module Stainless Steel 304 Verification Material One (x1) THS Sensor (10 x 20 mm) *Several sizes available based on sample size XPS Insulation for Asymmetric Testing

1 30003P014-00 THS Slab Module

The THS Slab Module is suitable for measurements on medium to extremely high conducting materials in strip form, such as stainless steel, carbon steel, aluminum, copper, silicon wafers, etc.

Specifications:

1Thermal Conductivity: 0.1 - 500 W/mK Additional Properties: Thermal Diffusivity and Volumetric Specific Heat Sensor Contact Resistance: Measured, m2K/W Accuracy: 5 % Repeatability: 2% 2Sample Configuration: Symmetric and Asymmetric Smallest Sample: 10 (fixed) x 30 x 0.1 mm Thickest Sample: Unlimited Includes:

THS Slab Module License SS 304 Verification Materials Insulation XPS Foam (Max 90C)

3. Place of Performance

NASA Langley Research Center Shipping and Receiving.

ATTN: Godfrey Sauti Hampton, VA 23666

4. Period of Performance

30 days ARO