Tab 04 Lift Locations Definition.pdf
PDF 193 KB Posted
- Solicitation number
- 80NCCS26941980Q
About this file
This document is a technical specification for tank segment lift design. Tank segments will be lifted using three quarter-inch-20 D-ring hoists, each rated for 600 pounds load capacity. The D-rings will be mounted at 120-degree intervals on the tank flanges to ensure balanced weight distribution. Heat-set inserts, specifically McMaster-Carr part number 94459A390, will be installed in the tank flanges to serve as the mounting locations for the D-rings. The document includes detailed cross-sectional drawings and dimensional specifications for the heat-set inserts, showing the installation method and structural configuration of the lift points. The specification provides visual representations of the lift locations on the tank, the heat-set insert design with technical measurements, and cross-sectional views of how the inserts integrate with the tank flange structure.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Tab 04 SOW.pdf | ||
| Tab 07 Capability Statement.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tank Segment Lift Design
• Tank segments will be lifted by three ¼”-20 D-ring hoists rated for 600 lbs each.
• D-rings will be mounted every 120° on tank flanges as is shown.
• Heat-set inserts like McMaster-Carr part number 94459A390 will be installed in the tank flanges serving as the mounting locations for the d-rings.
− https://www.mcmaster.com/94459A390/
120°120°
Lift Locations Lift Location Cross-sectionsHeat-Set Inserts https://www.mcmaster.com/94459A390/ https://www.mcmaster.com/94459A390/
Slide 1: Tank Segment Lift Design
File details come from the government source that posted it. Updated .