T10 Master Specifications 05 01 2020.pdf

USAO Miami 9th Floor Master Specifications Executive Office for United States Attorneys Updated: May 1, 2020

DEPARTMENT OF JUSTICE

175 N. Street NE, Suite 6.200 Washington, DC 20530. 202.252.5940

Executive Office for United States Attorneys Facilities, Acquisition and Support Services

INDEX

Door Types 3 Wall Types 7 Finishes 12 Millwork 17

HVAC 18

Electrical 19

This document is intended to serve as a guide for developing design and construction documents for all United States Attorney’s Offices. It is the responsibility of the local Project Architect, Engineer and/or General Contractor to apply the specifications stated herein and to comply with all local codes and construction methods. Interpretation of these specifications is at the sole discretion of EOUSA. Not all information specified herein will necessarily apply to all projects. Substitutions for listed hardware, etc. are not acceptable. DOJ Master Specifications take precedence over and govern all USAO project construction documents.

If any information contained within this document is deemed outdated or inaccurate, please contact Facilities, Management and Support Services (FMSS) at:

3CON

175 N Street NE, 6th Floor Washington, DC 20002 Tel. 202.252.5940 Fax. 202.252.5969

General Note:

All corridors within US Attorney controlled space shall be a minimum of 5’-0” wide.

Useful Websites

US Attorney Website http://www.usdoj.gov/usao/

USAO Design Guide Ask for revised PDF http://www.usdoj.gov/usao/eousa/foia_reading_room/usam/title3/usa00158.htm

Von Duprin Hardware http://www.vonduprin.com/

Simplex Hardware http://www.kaba-ilco.com/

Ballistic Window & Drs http://shotgard.com/ http://www.armortex.com/products.html

Antennas http://www.tripointglobal.com/antennas/data sheets/76-1-12ro.pdf

X-Ray Security Screening System http://www.rapiscansystems.com/en/products/bpi/productsrapiscan_618xr

Walkthrough Metal Detection System http://www.rapiscansystems.com/en/products/ps/productsmetor_6m

Air Purification System http://www.dynamicaqs.com/commercial/

Hirsch Back Boxes http://www.hirsch-identive.com/

In-Duct View Port http://www.mcgillairflow.com/textDocs/accessDoors/ad_hinged.htm

Metal Mesh http://amico-grating.com/regular-expanded-metal.htm http://www.usdoj.gov/usao/ http://www.usdoj.gov/usao/eousa/foia_reading_room/usam/title3/usa00158.htm http://www.vonduprin.com/ http://www.kaba-ilco.com/ http://shotgard.com/ http://shotgard.com/ http://www.armortex.com/products.html http://www.tripointglobal.com/antennas/data%20sheets/76-1-12ro.pdf http://www.rapiscansystems.com/en/products/bpi/productsrapiscan_618xr http://www.rapiscansystems.com/en/products/ps/productsmetor_6m http://www.dynamicaqs.com/commercial/ http://www.hirsch-identive.com/ http://www.mcgillairflow.com/textDocs/accessDoors/ad_hinged.htm http://amico-grating.com/regular-expanded-metal.htm

DOOR TYPES

D-04 Secondary Suite Perimeter Egress Door - (Outward Swing):

1-3/4” x 3’-0” x 6’-8” min. acoustical single solid wood or metal clad door (STC 45) with no windows or vents, and a continuously welded metal frame filled with sound deadening material (STC 45). Door and frame are to be prepped at the factory for the hardware listed below.

Mechanical door closer, LCN 4040 series, installed secure side.

Door Release Device: A security grade emergency door release device with a key over ride. Outside trim is lever action. Von Duprin 99-996-(Finish)-(size)-Storeroom/Nightlatch function. Medeco M3 keyway, removable cylinder, key should be factory restricted level 7.

HES 9600 Electric Strike.

Stainless Steel Cam Lift hinges.

Door contacts to be F&I by Security Contractor with General Contractor F&I ¾” EMT conduit stub up with insulated bushings and pull string to General Contractor F&I 12”x12”x4” J-box above ceiling on secure side.

In-door viewing device (DoorScope DS238 Metallic Ultra Wide Angle).

A single 4”x4” (1900 deep) electrical box with ¾” knock outs. The box shall be equipped with the appropriate sized single gang plaster ring. The size of the plaster ring shall be determined by the finished wall thickness.

The single gang plaster ring shall be flush mounted to the finished wall surface. with ¾” EMT conduit stub up with insulated bushings and pull string to 12”x12”x4” J-box above ceiling on secure side

Mechanical door sweep and screw-on continuous sound gasket to achieve an STC 45.

(1) Floor mounted stop.

See drawing below.

D-06

Typical Single Interior Door for United States Attorneys/Chief’s Office/Conference Room/Trial Prep/Main Copy Room:

1-3/4” x 3’-0” x 6’-8” min. single solid wood door w/ metal frame (STC 45).

Medeco Bilevel standard cylinder lockset.

Mechanical door sweep and continuous screw-on sound gasket to achieve an STC 45.

(1) Floor mounted stop, (3) silencers, (1) coat hook (as required).

Note: Main Conference Rooms may have a double door configuration as decided by EOUSA on a case-by-case basis.

The Inactive Door Leaf shall have the following additional hardware:

* 1 – ¾” x 3’ – 0” x 6’ – 8” min. single solid wood door leaf as the inactive leaf.

* Building standard latch mortised into inactive leaf.

* Mechanical door sweep and continuous screw-on sound gasket to achieve an STC 45.

* Continues 3/8” x 1’ x 6’ – 8” min. hard-wood astragal, stained to match door finish.

* Building Standard Flush Bolts, top and bottom of inactive door leaf.

D-07 Typical Single Interior Door for Interior Offices, AUSA Offices/Break Rooms/Storage at Interior Suite/Secondary Copy Rooms:

1-3/4” x 3’-0” x 6’-8” min. single solid wood door w/ metal frame or building standard if equivalent.

Medeco Bilevel standard cylinder lockset.

(1) Floor mounted stop, (3) silencers, and (1) coat hook (as required).

D-10 Typical Single/Double Door for Storage at Unsecured Corridor:

1-3/4” x 3’-0” x 6’-8” min. single solid wood door(s) w/ metal frame.

Mechanical door closer(s), LCN 4040 series, installed secure side.

Simplex L1000 (MODEL 1021) w/key override.

In-door viewing device (DoorScope DS238 Metallic Ultra Wide Angle).

Floor mounted stop, (3) silencers per door.

D-13 Typical Single Interior Door for IDF (Independent Distribution Frame) Room:

1-3/4” x 3’-0” x 6’-8” min. single louvered hollow wood door w/ metal frame.

Simplex L1000 (MODEL 1021) w/key override.

Mechanical door closer, LCN 4040 series.

Floor mounted stop.

General Door Notes

1. All hardware shall be installed in accordance with ABA Accessibility Standards. Standard office doors are to have Medeco Bilevel standard cylinders, provided with six-pin, paracentric, compliant with ANSI/BHMAA 156 standards.

2. GC to perform necessary testing, as well as all internal connections and adjustments for all door hardware power connections and request to exit (RX or REX) switches. The GC will also connect these devices to the door side of the wired hinge. The Security contractor will connect to electronic hinge. The GC will supply GSA and FMSS with wiring diagrams, identifying by color and polarity wires for power and Rex connections at the wired hinge 1 week before door hardware installation begins.

Wiring will be done in a uniform manner.

3. Medeco-3 key cylinders can only be purchased by the General Contractor with a letter of permission from the United States Attorney’s office on USAO letterhead. The cylinders must be delivered directly to a representative of the USAO. The representative shall then hand-deliver the cylinders to the GC for installation. USAO must maintain a physical chain of custody by directly supervising the installation of the Medeco-3 key cylinders.

4. All Medeco cylinders must be purchased by an authorized Medeco dealer.

5. All door hardware must be installed by a licensed, qualified locksmith/door hardware installer with a proven track record of installing the type of door hardware we specify. Installations done by anyone or any company that does not meet this requirement will not be accepted.

6. USAO Facilities Lockset finish preference is anodized aluminum. All door hardware finishes to match.

7. Documentation of manufacturer’s factory STC tests, verifying the door assemblies, with hinges and screw-on sound gaskets, etc., meet the minimum STC requirements for STC rated doors STC 45 and

STC 50.

8. USAO Door Finish shall be Stain Grade unless otherwise indicated.

9. “Outward Swing” shall refer to a door which swings out from the USAO secure perimeter/suite.

10. All metal door frames that are designated to be welded shall be done so with continuous welds.

11. If door hardware is Fail Safe, then the General Contractor shall have the Fire Alarm Company provide a relay on the Fire Panel to the door.

12. All door contacts on wood and metal doors that are not ballistic rated shall be surface mounted.

13. All junction boxes and conduit for access control doors must be mounted and ran on the secure side of the door.

14. See link below for Simplex Specifications.

15. All ballistic doors are to be manufactured by North American Bulletproof, San Antonio, TX

(http://shotgard.com/) 210.225.0982.

a. http://www.kaba-ilco.com/access_control/index.aspx http://www.kaba-ilco.com/access_control/index.aspx

WALL TYPES

WT-01A

Suite Demising Wall (slab to slab STC 45):

Minimum 3-5/8" 16 gauge Studs 5/8” Plywood (Class C or higher) (Threat Side) glued and screwed to studs with staggered joints (Not required in Courthouse projects, Federal Buildings or along full height concrete or CMU walls)

Minimum 5/8" Gypsum Wallboard (both sides) Stagger Gyp. Bd. to prevent Continuous seams

Sound Attenuation Batt Insulation

WT-03

USA Office/Chief’s Office/Conference Rooms/Break Rooms/Main Copy Room/Deposition/Interview and Trial Prep Spaces Wall (slab to slab STC 45):

Minimum 3-5/8" 20 gauge Stud Minimum 5/8" Gypsum Wallboard (both sides) Sound Attenuation Batt Insulation For WT-3A:

o 2’-0” clerestory window with 3/8” tempered glass o Hollow metal frame o Trim optional

For WT-3B:

o 3/8” floor to ceiling tempered glass panel o Hollow metal frame

WT-05

Typical Interior Wall (to underside of ceiling):

Minimum 3-5/8" 20 gauge Stud Minimum 5/8" Gypsum Wallboard (both sides) For WT-5A:

o 2’-0” clerestory window with 3/8” tempered glass o Hollow metal frame o Trim optional

For WT-5B:

o 3/8” floor to ceiling tempered glass panel o Hollow metal frame

WT-07

Locker / Shower Room Wall (slab to slab

STC 45):

Minimum 3-5/8" 20 gauge Stud Minimum 5/8” Moisture Resistant

Gypsum Wallboard (Locker / Shower Room side)

Minimum 5/8" Gypsum Wallboard (Office side)

Sound Attenuation Batt Insulation

WT-07a Shower Area & Toilet Room Wall:

Minimum 3-5/8" 20 gauge Stud Minimum 5/8” Cementitious Tile

Backer Board (Shower Room side) 4 ½” x 4 ½” or 6” x 6” Glazed

Ceramic Tile (Up to the ceiling in shower areas, 42” A.F.F. in toilet areas)

Minimum 5/8" Moisture Resistant Gypsum Wallboard

General Wall Notes

1. All Partitions shall be taped, bedded, and finished to a smooth wall texture, painted with one prime coat and one finish coat.

2. To minimize sound transmission through a wall, outlets should not be placed back to back. Outlets, conduit, and data jacks in SPR’s shall be surface mounted.

3. In SPR’s that require Foil-Backed Gypsum Board for RF protection, that gypsum board shall have the RF Foil factory incorporated into the gypsum board itself. RF Foil sheets applied to typical gypsum board are not an acceptable substitution for Foil-Backed gypsum board unless approved by EOUSA.

4. If the existing perimeter walls are slab-to-slab Concrete Masonry Unit (CMU) walls, then wire mesh or plywood construction is not necessary.

5. Perimeter partitions of the United States Attorney’s Office (USAO) projects, inside courthouses, will not require the security mesh or plywood in Wall Type WT-1 & 1A, due to the adequate security systems and 24Hr. security personnel, in the courthouse building.

6. Two hour fire-rated partitions surrounding fire stairs, vertical chases and elevator shafts that are also suite perimeter walls must be upgraded to meet WT-01 or 1A requirements by adding furring strips, wire mesh or plywood, slab–to-slab, and one layer of Gypsum board.

7. Sleeve penetrations must be sealed per applicable life safety code requirements.

FINISHES

F-01 Carpet

Carpet and Carpet Tile shall be commercially branded nylon (type 6 or nylon 6,6) with soil-hiding characteristics. Face yarn must be 100% nylon fiber. Loop and cut pile shall be 100% Bulk Continuous Filament (BCF). The dye method utilized must have dye lots adequate to meet open area layout sizes. Tufted construction shall be cut or loop. The tuft bind of loop pile carpets shall be 20 pounds for heavy and severe wear areas. Patterned pile texture is not permitted. Long-term appearance retention ratings for carpets utilized shall meet the Carpet and Rug Institute (CRI) appearance retention rating guidelines:

Moderate (2.5-3.0) -Private Offices, Heavy (3.0-3.5) -Meeting rooms, library, SPR, Severe (3.5-4) -Waiting room, Hallways

Provide factory bonded padding. Environmental standards must meet GSA requirements

F-02 Vinyl Composite Tiles

Vinyl Composition Tiles shall be installed in storage rooms, file rooms, and break rooms. Static Resistant Vinyl Composite Tile shall be installed in telephone and computer (ADP) rooms. Color and pattern are to be chosen by the USAO.

F-03 Ceramic Tile

Thin Set non-slip 8” to 12” Ceramic tiles, with matching color grout. 4½” x 4½” or 6” x 6” on the walls in shower and toilet rooms. Applicable where required by local building conditions. Color and pattern are to be chosen by the USAO.

Note: F-04 through F-10 not used.

F-11 Vinyl Base

4" high by .085" thick, unless otherwise specified. Color to complement the carpeting and chosen by the USAO.

F-12 Wood Base

4" high by 3/4" thick, made of hardwood and stained to match the office doors.

Note: F-13 through F-20 not used.

F-21 Paint

All walls shall be painted with a minimum of one prime coat and one finish coat unless otherwise indicated. Color and finish to be chosen by the USAO and approved by EOUSA.

F-22 Wall Covering

Vinyl wall covering. Color and style to be chosen by the USAO and approved by EOUSA. Fabric wall covering is not acceptable.

Note: F-23 through F-30 not used.

F-31 Building Standard Mini-Blinds or Vertical Blinds

Note: F-32 through F-33 not used.

F-34 Blackout Lining/or Blackout Shades

Shall be used in conference rooms and Multipurpose rooms that are located along exterior walls with windows.

F-35 Reflective Silver Security Film

Window Film: 8 mil, 20% reflective silver security film placed on the inner window surface. Such as 8 mil, 20% reflective silver security film with scratch resistant coating. The generic name is polyethylene terephthalate. E.g., Armorcoat AC 400, S20, 8C available from Armorcoat Security Glass Systems, Pleasanton, CA [(510) 484-4730], GSA contact number GS-07F-3733A.

http://www.armorcoatfilms.com/index.cfm/fuseaction/Product_Performance.Stats_AC

This will only apply to offices on the sixth floor or below.

Note: All finish selections with samples must be sent to EOUSA for final approval.

Note: Finish Schedule on next page.

http://www.armorcoatfilms.com/index.cfm/fuseaction/Product_Performance.Stats_AC

ROOM FINISH SCHEDULE

ROOM TITLE OR AREA

DESIGNATION

FLOOR BASE WALLS

WINDOW

TREATMENTS

SPECIFICATIONS

C A

R P

E T

R A

M

IC

T

IL

V

S

A T

IC

R

E S

IS

T

A N

O

N C

R E

L U

X U

R Y

V

IN

Y

E P

A N

K

R

IS

E

D F

L O

R P

E T

B O

R D

W

D

IN

Y L

W A

V E

R

G

P

H

A

IR

R

C E

Q U

IP

M

E

B

IL

D

A N

D A

A P

E

A C

K O

U T

L

IN

S H

A D

O R

W

IN

D

L L

T Y

A B

L E

S Q

U A

F

U.S. ATTORNEY’S SUITE

(Headquarters only)

Varies

USA’S OFFICE

(Headquarters and Branch offices)

D-06

WT-03A

USA’S CONFERENCE RM

WT-03A

USA’S SECRETARY

(Headquarters only – Private office or open office if in Executive Suite)

D-06 WT-03 135

USA’S FILE/COPY/FAX

D-06 WT-03 150

USA’S VISITOR SEATING AREA

U.S. ATTORNEY, TOILET

D-06 WT-03 75

FIRST ASSISTANT U.S. ATTORNEY

WT-03A

WT-03B

EXECUTIVE ASSISTANT USA

WT-03A

WT-03B

DIVISION CHIEF / MANAGING USA

(Criminal, Civil, OCDEFT)

WT-03A

WT-03B

DIVISION CHIEF / SUPERVISORY

SECRETARY

WT-03A

WT-03B

SUPERVISORY ASSISTANT USA

WT-03A

WT-03B

SENIOR LITIGATION COUNCIL

WT-03A

WT-03B

EXECUTIVE ADMINISTRATIVE

OFFICER (GS-15)

WT-03A

WT-03B

ASSISTANT USA

WT-05A

WT-05B

ADMINISTRATIVE OFFICER

WT-05A

WT-05B

LECC OFFICER

WT-05A

WT-05B

DEPUTY ADMINISTRATIVE OFFICER

WT-05A

WT-05B

BUDGET OFFICER

WT-05A

WT-05B

PERSONNEL OFFICER

WT-05A

WT-05B

PUBLIC AFFAIRS OFFICER

WT-05A

WT-05B

VICTIM WITNESS SPECIALIST

WT-05A

WT-05B

PARALEGAL

WT-05A

WT-05B

SUPERVISORY SUPPORT SERVICES

SPECIALIST

WT-05A

WT-05B

SYSTEMS MANAGER

WT-05A

WT-05B

VISITING ATTORNEY

WT-05A

WT-05B

ROOM FINISH SCHEDULE CONT.

TREATMENTS

R P

R A

M

IC

T

A T

IC

R

E S

IS

T

A

N C

R E

X U

R Y

V

IN

E P

A N

IS

E

D F

L O

R P

E T

B O

R D

Y L

W A

V E

R

A

IR

R

C E

Q U

IP

M

E

IL

D

A N

D A

A P

E

A C

K O

U T

L

IN

S H

A D

O R

W

IN

D

L L

T Y

A B

L E

S Q

U A

PERSONNEL SPECIALIST

(Open area)

ACQUISITION SPECIALIST /

PURCHASING AGENT

ASSISTANT SYSTEMS MANAGER

DOCKET TECHNICIAN

SECRETARY / LEGAL TECHNICIAN

STUDENT AID

CONTRACT EMPLOYEE

FINANCIAL LITIGATION UNIT (FLU)

SUPERVISOR (If AUSA)

WT-03A

WT-03B

SUPERVISOR (If not AUSA)

WT-05A

WT-05B

AGENT (Open area)

TASK FORCE SUPERVISOR

WT-03A

WT-03B

TASK FORCE ATTORNEY

D-07 WT-05 160

TASK FORCE INVESTIGATOR /

AGENT (Open area)

PRIMARY VISITOR WAITING AREA

D-01 W-01 W-02

WT-02

RECEPTIONIST

SECONDARY VISITOR WAITING

AREA (When necessary)

D-04 WT-01 150

SECURE WITNESS INTERVIEW

ROOM (Adjacent Primary Waiting Area)

D-03 W-01 W-02

MAIL SORT WORKSTATION

MAIN CONFERENCE ROOM

WT-03A

WT-03B

800 -

CONFERENCE ROOM

(Admin, Civil, Criminal, and Task Force)

WT-03A

WT-03B

300 - 400

TRIAL PREPARATION ROOM

(2 for every 3 Judges)

D-08

WT-03A

WT-03B

LITIGATION SUPPORT ROOM

ROOM FINISH SCHEDULE CONT.

TREATMENT

R P

R A

M

IC

T

A T

IC

R

E S

IS

T

A

N C

R E

X U

R Y

V

IN

E P

A N

IS

E

D F

L O

R A

M

IC

T

IN

T

O R

V

IN

A

IR

R

C E

Q U

IP

M

E

IL

D

A N

D A

A P

E

A C

K O

U T

L

IN

S H

A D

O R

W

IN

D

L L

T Y

A B

L E

S Q

U A

WITNESS INTERVIEW ROOM

(1 for every 10 attorneys)

VICTIM INTERVIEW ROOM

COLLECTION INTERVIEW ROOM

DEPOSITION ROOM

LIBRARY

(Headquarters and Staffed Branch offices)

1 s.f. per 6 legal volumes

LIBRARIAN

(Located within Library)

WT-05B

LIBRARY NETWORK PC / PRINTER

STATION (Open area)

40 each

SECURED STORAGE ROOM

D-15 WT-06 150 – 250

OPEN FILE ROOM

(Criminal, Civil, Admin, Personnel, FLU, Task Force, Victim/Witness)

9 s.f. per legal file

CLOSED FILE ROOM

(Criminal, Civil, Personnel, Task Force)

D-10 WT-05

9 s.f. per legal file

FAX/SHREDDER

20 each

SHARED PRINTER STATION

40 each

SUPPLY ROOM

(Headquarters and Branch offices)

D-07 WT-05 150 - 300

BULK SUPPLY/EQUIPMENT

STORAGE (Shell only)

D-07 WT-05

500 –

STAND-ALONE COPIER

60 each

BREAK ROOM

WT-03A

200 - 300

COFFEE NOOK (Open area)

60 each

COAT CLOSET

D-12 WT-05 10 each

MAIN COPY ROOM

D-06 WT-03 300

SECONDARY COPY ROOM

D-07 WT-05 150

ADP / TELE. ROOM (Large location)

D-04b WT-04

ADP / TELE. ROOM (Small location)

D-04b WT-04 150 - 350

ADP WORKROOM

(Adjacent to ADP / TELE. room)

D-11 WT-05 150 - 200

IDF ROOM

D-13 WT-03 150

SPR

D-05

D-05a D-05b

WT-06

WT-06F

SHOWER / LOCKER ROOMS

WT-07

WT-07a 200 - 400

General Finish Notes

1. Sample finish boards are to be provided to the USAO for selection. The chosen finish board must be sent to and approved by EOUSA.

MILLWORK

MW-03

Break Room / Kitchenette Counter

Where specified, furnish and install an Architectural Barriers Act Accessibility Standards (ABAAS) compliant 18" x 24" stainless steel sink with hot and cold water supply and waste line mounted in a finished wooden kitchen sink base cabinet; garbage disposal; 6’-0” of base cabinets (including sink base) with matching wall cabinets. Bottom of wall cabinets to be 24” above counter. Base cabinets to have a 6’-0” long, ½” thick, 25” deep 100% acrylic solid surface countertop with integral backsplash and ¼” round edge. Countertop must have 10-year commercial warranty.

Space and electrical requirements shall be provided to accommodate a microwave, coffee maker and a refrigerator.

MW-06

Lockers

Architect to coordinate with USAO concerning the style, color, size, etc., of the lockers.

HVAC

IDF Room

Room shall be provided with a separate (independent) air conditioning unit with temperature and humidity control sufficient to maintain a 24-hour temperature of no more than 75 degrees and a maximum humidity of 45-50 percent. If possible, the unit shall be mounted in the ceiling above the entry door to the ADP room. The air conditioning unit shall be able to handle heat output of 7,500 BTUs per hour.

Multipurpose Room

Room shall be provided with:

Supplemental HVAC with a dedicated thermostat and temperature control mounted next to the light switch.

Ceiling or wall mounted electric projection screen if requested.

Shower / Locker Room

Ventilation requirements shall be 50% more than the minimum required by code. 100% of the air shall be exhausted with outside discharge. Thermostat control shall be located within the USAO suite.

Ducts and Fire Dampers at Demising Partitions of USAO locations including leased locations and federal buildings.

The USAO Requires a rigid metal grid of steel bars, ½ inch thick in diameter, welded at each intersection, extending across their length and width, with a maximum of 6 inch spacing. The bars are to be welded to a secure steel frame inside any HVAC (supply, return or transfer) ducts, larger than 6” on sides and 96 square inches in cross-section, and are to be installed at the location where the duct bisects the demising partition. Fire dampers larger than 96 square inches, at the USAO perimeter demising partitions, are to receive similar security grids as deterrent against intrusion, through ducts and damper openings, into the USAO space.

Steel man bars are not required in ducts at suite demising partitions in courthouses.

Ducts and vents including building perimeter units located beneath windows must be treated for sound attenuation with commercial sound baffles on the secure side of the SPR walls, to achieve an STC 45 rating at the perimeter wall.

ELECTRICAL

Standard Office

One 20amp/110-120 volt, general purpose, dedicated, color-coded duplex electrical outlet on one wall (for computers and printers). This outlet must be connected to a dedicated circuit, with a maximum of four such outlets per dedicated circuit.

One 20 amp/110 volt, NEMA 5-20R, three wire, single-phase quad outlet.

One standard 2-plug Telephone/Data outlet located next to the dedicated outlet on one wall, and one 2-plug Telephone/Data outlet on an opposite wall, with 3/4” min. EMT provided from the box to just above the ceiling for data and telephone wiring (to be provided by EOUSA contractors).

One 20 amp/110 volt, NEMA 5-20R, three wire, single-phase duplex electrical on each of the remaining walls.

Break Room / Kitchenette

Break rooms and Kitchenette areas should be provided with two Ground Fault Interrupt (G.F.I.)

quadruplex outlets mounted above the counter top.

One standard Telephone outlet.

Provide enough power to accommodate a microwave, coffee maker and / or a refrigerator.

Copy Room / Copier Locations

Power: Qty (1) 208-240V/20A/60Hz (DEDICATED). Plug 6-20R

Offices with VTC Requirement One 20 amp/110 volt, NEMA 5-20R, three wire, single-phase duplex and one 2-plug Data outlet mounted 44” AFF. Provide 4’x4’x5/8” plywood blocking in wall cavity to mount VTC equipment

Telephone and Computer Cabling - The Lessor/GSA shall provide junction boxes, pull strings, and conduit stub with pull strings above all ceilings for data cabling. The lessor/GSA shall provide (2) two 2” sleeves with bushings above the ceiling of any room that has deck high walls. The USAO requires that any IT or security cabling that must traverse through any public or unsecured portion of any floor be installed in EMT conduit until the point that it enters a secured portion of the USAO facility. For stacked, multiple floor projects, USAO requires at least two risers (minimum (2) two 4” conduits or sleeves) between floors - one for computer/telephone cabling, the other for security cabling (security system wiring cannot share the same EMT as computer/telephone cabling.) Provide junction boxes at points of distribution. All Telephone and Computer Cabling is to be completed under a separate contract by an EOUSA approved/hired contractor.

IDF Room

Provide one a minimum of (1) one20 amp/110 volt, NEMA 5-20R, three wire, single-phase quadruplex outlet on a dedicated circuit. Final outlet type and quantities TBD upon district and OA review.

If Office Automation determines that all data cabling cannot be run to the ADP room due to distance issues, an Intermediate Distribution Frame (IDF) or supplemental computer room shall be utilized. The room must be located within United States Attorney Offices controlled space, be a minimum of 75-100 square feet and have vinyl, static resistant flooring. The location of the IDF shall be determined by EOUSA. Final outlet type and quantity TBD. It is preferable that all data rooms be stacked on top of one another. If an IDF is used, the General Contractor shall provide conduit and cores (minimum 2-4”) between the ADP and IDF rooms.

The local Systems Manager, Office Automation and Facilities must be consulted before the beginning of any project to determine the total number of circuits needed, as well as any other electrical, telephone, or equipment requirements.

All Computer Racks must be grounded.

Shower / Locker Rooms Provide a counter height 20 amp/110-120 volt, ground fault interrupter (GFI) outlet at the grooming shelves.

Additional housekeeping outlets shall be provided as required by code.

Lighting

Deep-cell parabolic louver 2’-0” wide x 4’-0” long or 2’-0” wide x 2’-0” long (or building standard that meets or exceeds this standard) fluorescent lighting fixtures with energy efficient lamps (T8 or better, i.e. energy efficient LED lighting) and electronic ballasts for standard interior lighting.

Such fixtures shall produce and maintain a uniform lighting level of 50 foot-candles at working surface height throughout work spaces, 20 foot-candles in corridors and 10 foot-candles in other non-working areas. Alternative proposals must be approved by EOUSA.

Provide circular recessed down lighting or track lighting, connected to a dimmer switch, in all large and medium size conference rooms.

Power & Uninterruptible Power Supply (UPS) Requirements With the installation of EVoIP, all switches will be connected to UPS units to ensure E911 survivability in the event of a power outage. The UPS units will be sized to provide 15 minutes of power during an outage.

UPS Models The UPS models are sized based on the power requirements of each stack, which is calculated by adding the watts for each switch. The UPS model information, as well as associated power and circuit types are shown in the table below. Select the model name to link to the APC website for additional information.

Max Power Supply Rating Recommended

Model Description Watts BTU/hr Watts BTU/hr

3750G-24TS 24 Ethernet 10/100/1000, 4 SFP, 1.5 RU 190 650 169 576

3750G-24TS-1U 24 Ethernet 10/100/1000, 4 SFP, 1 RU 100 314 94 319

3750-24TS 24 Ethernet 10/100, 2 SFP, 1 RU 50 171 45 151

3750-48TS 48 Ethernet 10/100, 4 SFP, 1.5 RU 75 256 66 225

3750E-24PD-S 24 Ethernet 10/100/1000, 4 SFP 750 2568 509 456

3750E-48PD-SF 48 Ethernet 10/100/1000, 4 SFP 1150 3939 978 796

UPS Model Watts Input Plug Circuit Type

Power

Cord Length

Weight (lbs)

Rack Units

SURTA2200RMXL2U 0-799

5-20P

120V / 15A

6’

61 2

SURTA2200RMXL2U+Battery

800-

5-20P

120V /

15A

6’

133 4

SURTA3000RMXL3U

1500- 2099 L5-30P

120V / 30A

8’ 120 3

SURTA3000RMXL3U+Battery 1500- 2099 L5-30P

120V / 30A

8’ 320 6

SURT6KRMXL3U-TF5

2100-

2299 L6-30P

208V / 30A or

240V / 30A

10’

221 5

SURT6KRMXL3U-

TF5+Battery

2300- 4199 L6-30P

208V /

30A or 240V /

30A

10’

421 8

SURT8KRMXL6U-

TF5+Battery

4200-

3 wire 50A

3 wire

50A 208V /

220V

(2PH+G)

Electrician

Installed 545 11 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA2200RMXL2U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA2200RMXL2U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA2200RMXL2U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA48RMXLBP2U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA3000RMXL3U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURTA3000RMXL3U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT192RMXLBP3U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT6KRMXL3U%2DTF5 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT6KRMXL3U%2DTF5 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT6KRMXL3U%2DTF5 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT192RMXLBP3U http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT8KRMXL6U%2DTF5 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT8KRMXL6U%2DTF5 http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SURT192RMXLBP3U