Synopsis or Combined Synopsis 9 21 2022.pdf

REQUEST FOR QUOTE

2031ZA22Q00208

Double Planetary Mixers

Table of Contents

Section Title A Solicitation/contract form (2) B Supplies or services and prices/costs (3) C Description/specifications/statement of work (4) D Packaging and marking (7) E Inspection and acceptance (8) F Deliveries or performance (9) G Contract administration data (11) H Special contract requirements (13) I Contract clauses (17) J List of attachments (25) K Representations, certifications, and other statements of offerors or respondents (26)

L Instructions, conditions, and notices to offerors or respondents (43)

M Evaluation factors for award (45)

2 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION A – Solicitation/contract form

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, and FAR 13 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

A. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06 effective 26 April 2022.

B. This procurement is set-aside for WOSB in accordance with FAR 19.1505 Set-aside procedures. The associated NAICS code is 333248 - All Other Industrial Machinery Manufacturing

C. The Defense Priorities and Allocations System (DPAS) and assigned rating are not applicable to this procurement.

3 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION B – Supplies or services and prices/costs

Washington, DC (DCF)

Base Period:

CLIN

SUPPLIES/SERVICES

QTY UOM Unit Price

AMOUNT

0001 New Double Planetary Mixers. To include one-year warranty

4 EA

0002 Training & Technical Support, one Tech (2 days @ 8 hours of travel) + (6 days @ hourly rate)

1 EA

0003 Shipping 4 EA

[END OF SECTION]

4 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION C – Description/specifications/statement of work

1.0 BACKGROUND

The Bureau of Engraving and Printing (BEP) a component of the Department of the Treasury designs, engraves, and prints U.S. banknote currency and other U.S. security products. Banknote currency manufacturing occurs at BEP’s Washington D.C.

Facility (DCF) and the Western Currency Facility (WCF) in Fort Worth, TX. BEP’s primary customer is the Federal Reserve Board (FRB). The Office of Engraving seeks to replace the four (4) Double Planetary Mixers used in the Roller Recovery Mixing Room under the Roller Recovery Branch in the Office of Engraving.

2.0 PURPOSE

2.1 Product, Service or Outcome Needed.

This is a non-personnel services contract to deliver four (4) Double Planetary Mixers.

The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. This all in effort to minimize equipment downtime or adversely affecting production needs of Roller Recovery operations.

2.2 Scope of the Product, Service, or Outcome.

1.1 The Contractor shall provide all labor, travel, parts, materials, transportation, equipment, tools, training, supplies, management and supervision and all other items and services necessary to deliver the new mixers.

3.0 TECHNICAL REQUIREMENTS/TASKS/OUTCOMES

3.1 The Contractor shall provide the following:

• 3.1.1 Deliver two at a time as to minimize adverse effects to production needs.

3.1.2. Deliver four (4) new Double Planetary mixers

• 3.1.3 Planetary speeds must be able to operate between 10 -30 rpm

• 3.1.4 Disperser speeds must be able to operate between 500 -1300 rpm

• 3.1.5 Must be able to maintain a vacuum of -27 +/- 3 Hg

• 3.1.6 Must have a mixing capacity of 2 – 5 gallons

• 3.1.7 Operator Training

• 3.1.8 Maintenance Training

3.1.3 Environment, Health & Safety Requirements - Contracted services & equipment must be performed in a manner consistent with the following Bureau of Engraving and Printing's (BEP) EMS documents: EHS Contractor Requirements (75D-07.0-04) & EHS Large Equipment Boilerplate (75D-07.0-06). The applicable contents of the documents must be adhered to. The BEP will furnish the documents as part of the contract.

5 Bureau of Engraving and Printing 2031ZA22Q00208

3.2 Deliverables:

SOW

Paragraph

Deliverable Due Date Deliverable Format

3.3 Warranty Fifteen (15)

business days after delivery

Paper document and electronic document (PDF).

3.3 Warranty

Contractor shall provide a one-year warranty for the equipment. Contractor shall provide information or documentation of what the warranty covers and a point of contact for any warranty issues or concerns. This deliverable shall be provided to the COR within fifteen (15) business days after delivery. Warranty shall begin at the completion of BEP testing and acceptance of the equipment.

4.0 PERIOD OF PERFORMANCE

The Period of Performance (POP) consists of a total period of one (1) base year from the date of award. The mixers will be purchased during the Base Year of the contract.

The POP is as follows: 365 days after contract award.

5.0 PLACE OF PERFORMANCE/DELIVERY

Place of Performance is Bureau of Engraving and Printing, 301 14th St SW, Washington, DC 20228. The Contractor shall deliver all items F.O.B. destination within one year or 365 days in receipt of the order.

The following DELIVERY information must be provided when scheduling delivery appointments: (1) Name of supplier/manufacturer; (2) Contract/Purchase Order #: (3) Total number of cartons & pallets; (4) Total weight; and (5) Date and time of delivery. The item(s) shall be delivered to the following address:

Bureau of Engraving and Printing Attn: To Be Provided at Time of Award Annex Building – Loading Dock D Street, Between 13th & 14th St., S.W.

Washington, DC 20228

Receiving hours for deliveries are 8:00 a.m. to 2:15 p.m., local time, Monday through Friday, excluding U.S. Government holidays and BEP year-end shutdown (which normally occurs between December 24 and January 1). The Contractor shall call the

6 Bureau of Engraving and Printing 2031ZA22Q00208

BEP appointment line at (202) 874-2333 at least twenty-four (24) hours in advance to schedule approximate delivery times. The appointment line is staffed from 8:30 am.

to 2:30 pm. Monday through Friday. A voice mail message maybe left after normal working hours. The following information should be provided:

- Name of supplier/manufacturer

- Contact Person with phone number

- Contract/Purchase Order Number

- Total number of cartons or pallets

- Total weight

- Date and Time of Delivery

*Note the following loading dock limitations for deliveries made to Washington D.C.: Over the road vehicles having an overall height exceeding 12’6” (3.8 meters) empty, or an overall length exceeding 42’ (12.8 meters) CANNOT be accommodated at our receiving platform.

7 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION D – Packaging and marking

The following instructions are required for any shipments to the BEP:

1.0 NOTICE OF PACKING SLIP REQUIREMENTS

The following outlines the Bureau of Engraving and Printing’s packing slip requirements to ensure efficient processing of shipments to the Washington, District of Columbia;

Landover, Maryland; and Fort Worth, Texas buildings:

The Bureau of Engraving and Printing requires that all packing slips be placed in a self-adhesive pack list envelope and affixed to the outside a shipment.

The packing slip will include, at minimum, the following information:

2.0 GENERAL ITEMS – INFORMATION REQUIRED FOR EACH SHIPMENT

Purchase Order Number – The order number BEP assigned to this purchase Shipping Address – Point from which the merchandise was shipped Telephone Number – The telephone number of the vendor contact to be called for inquires related to the merchandise Customer Information – The name and telephone number of the party to which the merchandise is being shipped Total Weight of Packages (if item is sold to BEP in pounds) If items are drop shipped from a supplier, you must ensure the proper purchase order number is written on the packing slip by your supplier

3.0 LINE ITEMS – INFORMATION REQUIRED FOR EACH LINE ITEM

INCLUDED IN THE SHIPMENT

Manufacturer Product Identification – Item Number assigned by manufacturer/supplier.

BEP Product Identification (If Applicable) –Stock Item Number assigned by BEP.

Quantity Ordered – Quantity on the purchase order or unit of measurement.

Quantity Shipped – With the packing slip.

Quantity Back-ordered, where applicable.

If the packing slip contains multiple purchase orders, each line item should include the applicable purchase order number.

4.0 NOTICE OF SHIPPING LABEL REQUIREMENTS

Every box/skid must have at least one shipping label applied to it. The label is to include, at minimum, the following information:

Manufacturer or Supplier – Name of Manufacturer or supplier/and Shipping Address – Point from which the merchandise was shipped/and BEP Purchase Order Number - PO# or CC order #/ and Customer Name & Telephone Number – First and last name, building and room #.

**Failure to adhere to the packing slip and shipping label requirements could result in shipment rejection, processing delay, and payment delay. **

8 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION E – Inspection and acceptance

CLAUSE

NUMBER TITLE DATE

52.246-1 Contractor Inspection Requirements APR 1984 52.246-2 Inspection of Supplies-Fixed-Price AUG 1996 52.246-16 Responsibility for Supplies APR 1984

9 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION F – Deliveries or performance

CLAUSE

NUMBER

TITLE DATE

52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay of Work APR 1984 52.247-34 F.O.B. Destination NOV 1991

1.0 BEP YEAR END SHUTDOWN PERIOD AND FEDERAL HOLIDAYS

(a) BEP observes the federal holidays that are listed on the Office of Personnel website at: https://www.opm.gov/fedhol/. The Presidential Inauguration Day is applicable only to the Washington, DC Currency Facility (DCF).

(b) BEP’s Y.E.S. Period typically occurs December 25th through January 1st of each calendar year.

2.0 NOTIFICATION OF DELIVERY

The contractor shall be responsible for providing all materials and services required for the delivery of all equipment at the designated BEP locations.

The contractor shall notify the CORs seven (7) days prior to scheduling equipment deliveries. Copies of the packing lists shall be included with this notification.

3.0 DELIVERY INSTRUCTIONS

BEP’s Washington, DC facility: Items needed to be delivered to the BEP’s Washington, DC facility shall be delivered to the following address:

Bureau of Engraving and Printing Annex Building Washington D. C. Facility (DCF) Attn: Provided at time of award D Street, Between 13th and 14th Street, SW Washington, DC 20228-0001

BEP’s Fort Worth, Texas: Items needed to be delivered to the facility shall be delivered to the following address:

Bureau of Engraving and Printing Western Currency Facility (WCF) Attn: Provided at time of award 9000 Blue Mound Road Fort Worth, Texas 76131 https://www.opm.gov/fedhol/

10 Bureau of Engraving and Printing 2031ZA22Q00208

4.0 DELIVERY INFORMATION

The following DELIVERY information must be provided when scheduling delivery appointments: (1) Name of supplier/manufacturer; (2) Contract/Purchase Order #; (3) Total number of items; (4) Total weight (if applicable), and; (5) Date and time of delivery.

Deliveries to WASHINGTON, D.C. ANNEX BUILDING – (LOADING DOCK ON “D”

STREET SW, BETWEEN 13TH & 14TH STREET SW):

Vendors must call the appointment hotline at (202) 874-2333 twenty-four (24) hours in advance to schedule approximate delivery times. The hotline is manned from 6:30 am to 2:15 pm Monday through Friday. A voicemail message maybe left after normal working hours. Deliveries are accepted between 8:00 am and 2:15 pm, Monday through Friday, excluding holidays.

Over the road vehicles having an overall height exceeding 12’6” (3.8 meters) empty, or an overall length exceeding 42’ (12.2 meters) cannot be accommodated at our receiving platform.

To resolve any delivery issue, please contact Shipping & Receiving at (202) 874-3620 care of Material Handler/Leader.

Deliveries to WESTERN CURRENCY FACILITY, 9000 BLUE MOUND ROAD, FORT WORTH, TEXAS: Vendors must call the Receiving Area at (817) 847-3822 at least twenty-four (24) hours in advance to schedule all deliveries. Appointments may be made during normal working hours of 7:00 am to 3:00 pm or after hours at (817) 847-3831. Receiving hours are from 7:00 am to 2:30 pm local time, Monday through Friday, excluding holidays. To resolve any delivery issue, please contact Shipping & Receiving at (817) 847-3831 or (817) 847-3822.

11 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION G – Contract administration data

1.0 CONTRACT ADMINISTRATION OFFICE

This contract will be administered by:

Bureau of Engraving and Printing Office of the Chief Procurement Officer (OCPO) 14th and C Street, S.W.

Washington, D.C. 20228-0001

Written communication to the Contracting Officer shall make reference to the contract number.

2.0 DTAR 1052.201-70, Contracting Officer's Representative (COR) Appointment and

Authority (APR 2015)

(a) The COR WILL BE PROVIDED AT CONTRACT AWARD.

(b) Performance of work under this contract is subject to the technical direction of the COR identified above, or a representative designated in writing. The term “technical direction” includes, without limitation, direction to the contractor that directs or redirects the labor effort, shifts the work between work areas or locations, and/or fills in details and otherwise serves to ensure that tasks outlined in the work statement are accomplished satisfactorily.

(c) Technical direction must be within the scope of the contract specification(s)/work statement. The COR does not have authority to issue technical direction that:

(1) Constitutes a change of assignment or additional work outside the contract specification(s)/work statement;

(2) Constitutes a change as defined in the clause entitled “Changes”;

(3) In any manner causes an increase or decrease in the contract price, or the time required for contract performance;

(4) Changes any of the terms, conditions, or specification(s)/work statement of the contract;

(5) Interferes with the contractor's right to perform under the terms and conditions of the contract; or

(6) Directs, supervises or otherwise controls the actions of the Contractor's employees.

(d) Technical direction may be oral or in writing. The COR must confirm oral direction in writing within five workdays, with a copy to the Contracting Officer.

(e) The Contractor shall proceed promptly with performance resulting from the technical direction issued by the COR. If, in the opinion of the Contractor, any direction of the COR or the designated representative falls within the limitations of (c) above, the Contractor shall immediately notify the Contracting Officer no later than the beginning of the next Government work day.

(f) Failure of the Contractor and the Contracting Officer to agree that technical direction is within the scope of the contract shall be subject to the terms of the clause entitled “Disputes.”

(End of clause)

12 Bureau of Engraving and Printing 2031ZA22Q00208

3.0 DTAR 1052.232-7003, Electronic Submission of Payment Requests (APR 2015)

(a) Definitions. As used in this clause—

(1) “Payment request” means a bill, voucher, invoice, or request for contract financing payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices” and the applicable Payment clause included in this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests electronically using the Invoice Processing Platform (IPP). Information regarding IPP, including IPP Customer Support contact information, is available atwww.ipp.gov or any successor site.

(c) The Contractor may submit payment requests using other than IPP only when the Contracting Officer authorizes alternate procedures in writing in accordance with Treasury procedures.

(d) If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. (End of clause)

13 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION H – Special contract requirements

1.0 TYPE OF CONTRACT

This is a firm fixed-price type contract.

2.0 INTERPRETATION OF CONTRACT REQUIREMENTS

No interpretation of any provision of this contract, including applicable specification(s)/work statement, shall be binding on the Government unless furnished or agreed to in writing by the Contracting Officer (CO).

3.0 NOTICE TO THE GOVERNMENT OF DELAYS

In the event the Contractor encounters difficulty in meeting performance requirements, or when it anticipates difficulty in complying with the contract delivery schedule or date, or whenever the Contractor has knowledge that any actual or potential situation is delaying or threatens to delay the timely performance of this contract, the Contractor shall immediately notify the CO and the COR, in writing, giving pertinent details, provided, however, that this data shall be informational only in character and that this provision shall not be construed as a waiver by BEP of any delivery schedule or date or of any rights or remedies provided by law or under this contract.

4.0 IDENTIFICATION OF CONTRACTOR EMPLOYEES

All contract personnel attending meetings, answering Government telephones, and working in other situations where their Contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by Contractors are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. All Contractor personnel shall clearly identify themselves as a Contractor and shall be required to wear identification (ID) badges in a visible location on the front of exterior clothing, above the waist, (except when safety or health reasons prevent such placement). ID badges shall be worn at all times when performing work. ID badges shall have an identification picture and shall state the name of the individual and the company they represent. Contractor personnel are prohibited from possessing weapons, firearms, or ammunition, on themselves or within their Contractor-owned or privately owned vehicle while on BEP premises.

5.0 POST AWARD MEETING

At its discretion, BEP may schedule and conduct a post award meeting with the Contractor after contract award. The objectives of this meeting would be to: introduce key participants and explain their roles, review deliverables, review the performance work statement and tasks to ensure a common understanding of the requirements and objectives, as well as other matters of importance and relevance. The COR will provide advance notice, agenda and, meeting days and time; which will be between 8:00 a.m. – 4:00 p.m. Eastern. If BEP determines that a post award

14 Bureau of Engraving and Printing 2031ZA22Q00208 meeting is necessary, the day(s) and time(s) of any such meeting will be determined after contract award.

6.0 EVALUATION OF CONTRACTOR PERFORMANCE

(a) Interim and final evaluations of Contractor performance will be prepared for this contract in accordance with FAR 42.1503. The final performance evaluations will be prepared at the time of completion of work.

(b) The Contractor can elect to review the evaluation and submit additional information or a rebuttal statement. The Contractor will be permitted 60 calendar days to respond. Contractor response is voluntary. If the Contractor does not respond within 60 days, the Government will presume that the Contractor has no comment. Any disagreement between the parties regarding an evaluation will be referred to an individual at a level above the Contracting Officer, whose decision is final.

(c) Copies of the evaluations, Contractor responses, and review comments, if any, will be retained as part of the contract file, and may be used to support future award decisions.

Bureau of Engraving and Printing utilizes the Contractor Performance Assessment Reporting System (CPARS) and the Federal Awarded Performance and Integrity Information System (FAPIIS) to record and maintain past performance information. The past performance systems hosts a suite of web-enabled applications that are used to document Contractor performance information that is required by Federal Regulations.

The CPARS module assesses performance on contracts for Systems, Services, Information Technology, and Operations Support, Architect-Engineer contracts, and performance on Construction contracts. CPARS reference material can be accessed at https://cpars.cpars.gov/cpars/app/home.do

Federal Awarded Performance and Integrity Information System (FAPIIS) http://www.fapiis.gov/fapiis/govt/datareports.jsp

The registration process requires the Contractor to identify an individual that will serve as a primary contact. This individual will be authorized access to the evaluation for review and comment. In addition, the Contractor is encouraged to identify a secondary contact in the event the primary contact is unavailable to process the evaluation within the required 60-day time period. After the BEP Contract Specialist registers the contract in one of the systems listed above, the Contractor will receive a system generated e-mail notifying him/her that the contract is registered. A system generated e-mail will also provide the Contractor with a User ID if the person does not already have a system User ID.

Once a performance evaluation has been prepared and is ready for comment, the Contractor representative will receive a system generated e-mail notification that the performance evaluation is electronically available for review and comment. The Contractor representative will receive an automated e-mail whenever an assessment is completed and can subsequently https://cpars.cpars.gov/cpars/app/home.do http://www.fapiis.gov/fapiis/govt/datareports.jsp

15 Bureau of Engraving and Printing 2031ZA22Q00208 retrieve the completed assessment from system. Contractors may access evaluations at one of the website listed above for review and comment in CPARS.

7.0 BUREAU WORKING RESTRICTIONS

When the project specifications permit the undertaking of contract work during Bureau working hours, such work must be performed without:

• Interfering with Government business;

• Unduly restricting traffic;

• Causing unsafe conditions for employees and visitors; and

• Adversely affecting the operation of Bureau equipment.

When, the Contracting Officer has determined that the Contractor’s work is in violation of any of the four restrictions above, the Contractor shall be required to perform the work at such time and under such conditions as are in the best interest of the Bureau. In this connection, the directions of the Contracting Officer shall be binding and shall be executed by the Contractor at no additional cost to the Government.

Any Contractor personnel that are deemed to be working in an unsafe manner or endangering their own or others health may be removed from the Bureau under order of the Contracting Officer.

At this time, the Bureau is limiting access to the facilities due to COVID-19 concerns.

Visitors to the facility will be required to wear masks/facial coverings and have their temperature checked. Failure to adhere to Bureau policies will be denied entry.

8.0 PARKING

All vehicles entering the facility are subject to inspection. There is no available parking at the DCF. Limited parking is available at the WCF.

9.0 BUREAU’S REGULATIONS

All persons working on Bureau premises under the terms of the Contract shall, while on the premises, be under the administrative direction of the Contracting Officer and shall be subject to all general rules and regulations governing the Bureau and, in particular, all applicable security regulations. If the contract requires contract employees to work on Bureau premises for a period of time exceeding five calendar days, such employees will be subject to an appropriate preliminary personnel security check to be conducted by the Bureau's Office of Security. Such employees shall be approved by the Contracting Officer prior to commencing work on the premises. Employees who do not meet established security criteria shall not be permitted to work on the premises.

10.0 CONTRACTOR OFFICER REPRESENTATIVE (COR)

16 Bureau of Engraving and Printing 2031ZA22Q00208

The COR will be identified by separate letter issued by the Contracting Officer (CO). The COR monitors all technical aspects of the Contract and assists in Contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor Contractor's performance and notifies both the CO and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the Contract.

11.0 SECURITY REQUIREMENTS

BEP’s facilities are considered to be secure government facilities; therefore visitors to BEP may be given a visitor’s security badge by security personnel and escorted by Government authorized personnel. Visitor security badges shall be worn above the waist, clearly visible, with picture or front side front forward at all times. Visitor security badges are to be returned upon leaving the site.

12.0 TRAVEL COST

To include: Labor (Technical Support) one Tech (2 days @ 8 hours of travel @172.53 hourly rate) + (6 days @172.53 hourly rate) inclusive of BAT, Training.

17 Bureau of Engraving and Printing 2031ZA22Q00208

SECTION I – Contract clauses

FAR CLAUSE 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be assessed electronically at this/these address(es):

www.acquisition.gov (End of Clause)

CLAUSE

NUMBER TITLE DATE

52.202-1 Definitions JUN 2020 52.203-3 Gratuities APR 1984 52.203-5 Covenant Against Contingent Fees MAY 2014 52.203-7 Anti-Kickback Procedures JUN 2020 52.203-12 Limitation on Payments to Influence Certain Federal Transactions JUN 2020 52.203-17 Contractor Employee Whistleblower Rights and Requirements to

Inform Employees of Whistleblower Rights

JUN 2020

52.204-4 Printed or Copied Double-Sided on Recycled Paper MAY 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.212-4 Contract Terms and Conditions—Commercial Items NOV 2021 52.222-20 Contracts for Materials, Supplies, Articles, and Equipment Exceeding

$15,000

JUN 2020

52.223-6 Drug-Free Workplace MAY 2001 52.223-10 Waste Reduction Program MAY 2011 52.232-1 Payments APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors NOV 2021 52.242-13 Bankruptcy JUL 1995 52.225-18 Place of Manufacture AUG 2018 52.243-1 Changes-Fixed Price AUG 1987

FAR 52.204-1, Approval of Contract (DEC 1989) This contract is subject to the written approval of the BEP Contracting Officer and shall not be binding until so approved. (End of Clause)

FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (MAY 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further http://www.acquisition.gov/ https://www.acquisition.gov/content/52203-19-prohibition-requiring-certain-internal-confidentiality-agreements-or-statements#i52_203-19

18 Bureau of Engraving and Printing 2031ZA22Q00208

Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

XX(5) 52.233-2, Service of Protest (Sept 2006) XX(5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

XX(6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

_ XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

XX (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

XX (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111- 117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

__ (10) [Reserved].

__ (11)

(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Mar 2020) (15 U.S.C.657a).

__ (ii) Alternate I (Mar 2020) of 52.219-3.

__ (12)

(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Mar 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (Mar 2020) of 52.219-4.

__ (13) [Reserved] X(14) https://www.acquisition.gov/content/52204-23-prohibition-contracting-hardware-software-and-services-developed-or-provided-kaspersky-lab-and-other-covered-entities#id189A70O0P1N https://www.acquisition.gov/content/52204-25-prohibition-contracting-certain-telecommunications-and-video-surveillance-services-or-equipment#id1989I600I4C https://www.acquisition.gov/content/52209-10-prohibition-contracting-inverted-domestic-corporations#i1062680 https://www.acquisition.gov/content/52233-3-protest-after-award#i1048661 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52233-4-applicable-law-breach-contract-claim#i1048698 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52203-6-restrictions-subcontractor-sales-government#i1063319 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52203-13-contractor-code-business-ethics-and-conduct#i1063504 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52203-15-whistleblower-protections-under-american-recovery-and-reinvestment-act-2009#i1063607 https://www.acquisition.gov/content/52204-10-reporting-executive-compensation-and-first-tier-subcontract-awards#i1064087 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/content/52204-14-service-contract-reporting-requirements#i1064214 https://www.acquisition.gov/content/52204-15-service-contract-reporting-requirements-indefinite-delivery-contracts#i1064243 https://www.acquisition.gov/content/52209-6-protecting-government%E2%80%99s-interest-when-subcontracting-contractors-debarred-suspended-or-proposed-debarment#i1062590 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/content/52209-9-updates-publicly-available-information-regarding-responsibility-matters#i1062651 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/content/52219-3-notice-hubzone-set-aside-or-sole-source-award#i1057314 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/content/52219-3-notice-hubzone-set-aside-or-sole-source-award#i1057314 https://www.acquisition.gov/content/52219-4-notice-price-evaluation-preference-hubzone-small-business-concerns#i1057352 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-4-notice-price-evaluation-preference-hubzone-small-business-concerns#i1057352

19 Bureau of Engraving and Printing 2031ZA22Q00208

X(i) 52.219-6, Notice of Total Small Business Set-Aside (Mar 2020) (15 U.S.C.644).

__ (ii) Alternate I (Mar 2020).

__ (iii) Alternate II (Nov 2011).

__ (15)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Mar 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17)

(i) 52.219-9, Small Business Subcontracting Plan (Mar 2020) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Jun 2020) of 52.219-9.

__ (iii) Alternate II (June 2020) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Jun 2020) of 52.219-9 __ (18) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

X(19) 52.219-14, Limitations on Subcontracting (Sep 2021) (15 U.S.C.637(a)(14)).

__ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Mar 2020) (15 U.S.C. 657f).

__ (22)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (Mar 2020) (15 U.S.C. 632(a)(2)).

(ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Mar 2020) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Mar 2020) (15 U.S.C. 637(m)).

(25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

(26) 52.219-33, Nonmanufacturer Rule (Mar 2020) (15 U.S.C. 637(a)(17)).

XX (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_ XX (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022) (E.O.13126).

_ XX (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

XX (30)

(i) 52.222-26, Equal Opportunity (Sept 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

XX (31)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (July 2014) of 52.222-35.

__ (32)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C.793).

__ (ii) Alternate I (Jun 2020) of 52.222-36.

https://www.acquisition.gov/content/52219-6-notice-total-small-business-set-aside#i1057393 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-7-notice-partial-small-business-set-aside#i1057419 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-7-notice-partial-small-business-set-aside#i1057419 https://www.acquisition.gov/content/52219-7-notice-partial-small-business-set-aside#i1057419 https://www.acquisition.gov/content/52219-8-utilization-small-business-concerns#i52_219-8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-9-small-business-subcontracting-plan#i52_219-9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-9-small-business-subcontracting-plan#i52_219-9 https://www.acquisition.gov/content/52219-9-small-business-subcontracting-plan#i52_219-9 https://www.acquisition.gov/content/52219-9-small-business-subcontracting-plan#i52_219-9 https://www.acquisition.gov/content/52219-9-small-business-subcontracting-plan#i52_219-9 https://www.acquisition.gov/content/52219-13-notice-set-aside-orders#i1057715 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-14-limitations-subcontracting#i1057730 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-16-liquidated-damages-subcontracting-plan#i1057758 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-27-notice-service-disabled-veteran-owned-small-business-set-aside#i1057823 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-28-post-award-small-business-program-rerepresentation#i1057874 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-28-post-award-small-business-program-rerepresentation#i1057874 https://www.acquisition.gov/content/52219-29-notice-set-aside-or-sole-source-award-economically-disadvantaged-women-owned-small-business-concerns#i1057902 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52219-30-notice-set-aside-or-sole-source-award-women-owned-small-business-concerns-eligible-under-women-owned-small-business-program#i1057947 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/content/52222-3-convict-labor#i1055332 https://www.acquisition.gov/content/52222-19-child-labor-cooperation-authorities-and-remedies#i1055664 https://www.acquisition.gov/content/52222-21-prohibition-segregated-facilities#i1055713 https://www.acquisition.gov/content/52222-26-equal-opportunity#i1055793 https://www.acquisition.gov/content/52222-26-equal-opportunity#i1055793 https://www.acquisition.gov/content/52222-35-equal-opportunity-veterans#i1056230 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/content/52222-35-equal-opportunity-veterans#i1056230 https://www.acquisition.gov/content/52222-36-equal-opportunity-workers-disabilities#i1056250 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/content/52222-36-equal-opportunity-workers-disabilities#i1056250

20 Bureau of Engraving and Printing 2031ZA22Q00208

_X_ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

_X_ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

XX (35)

(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (37)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

__ (40)

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (41)

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

__ (43)

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_ XX (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun 2016) (E.O. 13693).

__ (47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

XX (48) 52.225-1, Buy American-Supplies (Nov 2021) (41 U.S.C. chapter 83).

__ (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, https://www.acquisition.gov/content/52222-37-employment-reports-veterans#i1056265 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/content/52222-40-notification-employee-rights-under-national-labor-relations-act#i1056304 https://www.acquisition.gov/content/52222-50-combating-trafficking-persons#i1056535 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52222-50-combating-trafficking-persons#i1056535 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52222-54-employment-eligibility-verification#i1056753 https://www.acquisition.gov/content/221803-contract-clause#i1095479 https://www.acquisition.gov/content/52223-9-estimate-percentage-recovered-material-content-epa-designated-items#i1053138 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52223-9-estimate-percentage-recovered-material-content-epa-designated-items#i1053138 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52223-11-ozone-depleting-substances-and-high-global-warming-potential-hydrofluorocarbons#i1053180 https://www.acquisition.gov/content/52223-12-maintenance-service-repair-or-disposal-refrigeration-equipment-and-air-conditioners#i1053196 https://www.acquisition.gov/content/52223-13-acquisition-epeat%C2%AE%E2%80%93registered-imaging-equipment#i1053207 https://www.acquisition.gov/content/52223-13-acquisition-epeat%C2%AE%E2%80%93registered-imaging-equipment#i1053207 https://www.acquisition.gov/content/52223-14-acquisition-epeat%C2%AE-registered-televisions#i1053232 https://www.acquisition.gov/content/52223-14-acquisition-epeat%C2%AE-registered-televisions#i1053232 https://www.acquisition.gov/content/52223-15-energy-efficiency-energy-consuming-products#i1053246 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52223-16-acquisition-epeat%C2%AE-registered-personal-computer-products#i1053274 https://www.acquisition.gov/content/52223-16-acquisition-epeat%C2%AE-registered-personal-computer-products#i1053274 https://www.acquisition.gov/content/52223-18-encouraging-contractor-policies-ban-text-messaging-while-driving#i1053316 https://www.acquisition.gov/content/52223-20-aerosols#i52_223_20 https://www.acquisition.gov/content/52223-21-foams#id1668D08086F https://www.acquisition.gov/content/52224-3-privacy-training#i52_224_3 https://www.acquisition.gov/content/52224-3-privacy-training#i52_224_3 https://www.acquisition.gov/content/52225-1-buy-american-supplies#i1053372 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52225-3-buy-american-free-trade-agreements-israeli-trade-act#i1053446 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

21 Bureau of Engraving and Printing 2031ZA22Q00208

19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109- 283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

__ (iii) Alternate II (May 2014) of 52.225-3.

__ (iv) Alternate III (May 2014) of 52.225-3.

XX (50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX(51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurement (Jun 2020) __ (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C.4505, 10 U.S.C.2307(f)).

__ (57) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C.4505, 10 U.S.C.2307(f)).

XX (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C.3332).

__ (60) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C.3332).

__ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

__ (63)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

__ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

__ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52225-3-buy-american-free-trade-agreements-israeli-trade-act#i1053446 https://www.acquisition.gov/content/52225-3-buy-american-free-trade-agreements-israeli-trade-act#i1053446 https://www.acquisition.gov/content/52225-3-buy-american-free-trade-agreements-israeli-trade-act#i1053446 https://www.acquisition.gov/content/52225-5-trade-agreements#i1053648 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section2501&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://www.acquisition.gov/content/52225-13-restrictions-certain-foreign-purchases#i1054249 https://www.acquisition.gov/content/52225-26-contractors-performing-private-security-functions-outside-united-states#i1054921 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3…