Synopsis for TF 33 3rd and 4th Stage Turbine Blade Sets.pdf

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)

TINKER AIR FORCE BASE OKLAHOMA

Synopsis for FA8121-23-Q-0015

AFSC/PZAAA, 3001 STAFF DR, STE 1AF1/97E, TINKER AFB, OK 73145-3032

1. Estimated Solicitation issue date: 4 May 2023 Estimated Solicitation closing/response date: 5 June 2023

2. PR#: FD20302301202.

3. This acquisition will be one-time spares buy for the remanufacture of TF 33 3rd and 4th Stage Turbine Blade Sets.

4. RMC: R1/C

5. Item: Remanufacture of TF 33 3nd and 4th Stage Low Speed Turbine Blade Sets.

6. Part Number(s): P/N 781777, NSN: 2840010991805RV

P/N 476624, NSN: 2840009873757RV

7. Description:

NSN: 28400010991805

The 3nd Stage Turbine Blade is 7.5 inches long, 1.5 inches wide, 1.5 inches heigh, weighs 1 pound. Item material is PWA 655 (INCONEL 713) NICKEL ALLOY COATING IS PWA 694. The 3rd stage blades are installed on 3rd Stg. Turbine disk, as super headed air hits the blade along with the 2nd Stg. And 4th Stg.

Blades help in aiding power to the low-speed compressor. This is a critical safety item.

NSN: 2840009873757

The 4th Stage Turbine Blade is 10 inches long, 1.5 inches wide, 1 inch heigh, weighs 3 pounds. Item material is PWA 686. The 4th stage blade set consists of two equallymoment weighted blades made of PWA 686 (Was Poloy) machined forgings. The forgings are precision machined to critical limits. The blade is attached to the disk by serrations. This is a critical safety item.

8. Quantity/Delivery: CLIN 0001, NSN: 2840010991805, 1,827 units (SE), early delivery is acceptable.

CLIN 0002, NSN: 2840009873757, 1,554 units (SE), early delivery is acceptable.

9. Application: TF 33 Engine

10. Destination: Tinker Air Force Base (TAFB), OK

11. UID: If unit price exceeds $5,000 then UID requirements will apply

12. Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards

13. Additional Information:

Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION

REQUESTS.

The Government is using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov

14. This will be a Small Business Set-Aside Competitive Acquisition open only to Qualified Sources.

15. Buyer Name, Phone Number and E-mail Address: Kawika Ah Lo, (405) 734-6941, kawika.ah_lo@us.af.mil

Matt Simon Contracting Officer

AFSC/PZAAA

http://www.sam.gov/