Synopsis.pdf

B-1 YAW Stability Control Augmentation System (SCAS) NSNs1650-01-261-9975, 1650-01-224-8893, 1650-01-263-4504, 1650-01- 187-8287, 1650-01-263-4505, 1650-01-191-1601

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Re-manufacture of B-1 YAW Stability Control Augmentation System (SCAS). The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A firm fixed price Indefinite Delivery Indefinite Quantity (IDIQ) type of contract contemplated is a 5 Year Basic Ordering Period Contract.

The requirements set forth in this notice are defined per Purchase Request FD2030-21-00601 as follows:

Written response is required.

Item 0001: Remanufacture of Servo cylinder Assembly, 5 Year Basic Ordering Period; NSN: 1650-01-261-9975 P/N L5877400-071;

BEQ: 40 each, MIN: 5 each, MAX: 200 each

Item 0002: Remanufacture of Servo cylinder Assembly, 5 Year Basic Ordering Period; Input NSN: 1650-01-224-8893; Output 1650- 01-261-9975 P/N L5877400-061; BEQ: 5 each, MIN: 2 each, MAX: 10 each

Item 0003: Remanufacture of Servo cylinder, 5 Year Basic Ordering Period; NSN: 1650-01-263-4504 P/N L5877500-121; BEQ: 12 each, MIN: 4 each, MAX: 60 each

Item 0004: Remanufacture of Servo cylinder, 5 Year Basic Ordering Period; NSN: 1650-01-187-8287; Output 1650-01-263-4504 P/N L5877500-101; BEQ: 5 each, MIN: 2 each, MAX: 10 each

Item 0005: Remanufacture of Servo cylinder, 5 Year Basic Ordering Period; NSN: 1650-01-263-4505 P/N L5877500-131; BEQ: 12 each, MIN: 4 each, MAX: 60 each

Item 0006: Remanufacture of Servo cylinder, 5 Year Basic Ordering Period; NSN: 1650-01-191-1601; Output 1650-01-263-4505 P/N L5877500-111; BEQ: 5 each, MIN: 2 each, MAX: 10 each

Item 0007: Over and Above. To be negotiated.

Item 0008: Data (Not Separately Priced)

NSN: 1650-01-261-9975:

Function: Controls the pitch and roll function of the stability control augmentation system.

Dimensions: 9” h x 8.0” w x 33” l and weighs 34.0 lbs. Material: steel, aluminum, rubber and teflon seals, electrical wiring.

Delivery: 9 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

NSN: 1650-01-224-8893; Output 1650-01-261-9975:

Function: Controls the pitch and roll function of the stability control augmentation system

Dimensions: 9.0” h x 8” w x 33.0” l and weighs 34.0 lbs. Material: steel, aluminum, rubber and teflon seals, electrical wiring

Delivery: 1 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

NSN: 1650-01-263-4504:

Function: Controls the yaw function of the stability control augmentation system

Dimensions: 8.5” h x 6.0” w x 21.5” l and weighs 14.41 lbs. Material: steel, aluminum, rubber and teflon seals, electrical wiring

Delivery: 2 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

NSN: 1650-01-187-8287; Output 1650-01-263-4504:

Function: Controls the yaw function of the structural control system

Dimensions: 8.5” h x 6.0” w x 21.5” l and weighs 14.41 lbs. Material: Steel, aluminum, rubber and teflon seals, electrical wiring.

Delivery: 1 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

NSN: 1650-01-263-4505:

Function: Controls the yaw function of the stability control augmentation system

Dimensions: 8.5” h x 6.0” w x 21.5” l and weighs 14.41 lbs. Material: steel, aluminum, rubber and teflon seals, electrical wiring

Delivery: 2 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

NSN: 1650-01-191-1601; Output 1650-01-263-4505:

Function: Controls the yaw function of the structural control system

Dimensions: 8.5” h x 6.0” w x 21.5” l and weighs 14.41 lbs. Material: steel, aluminum, rubber and teflon seals, electrical wiring.

Delivery: 1 each every 30 days after receipt of order (ARO) or reparable units whichever is later; Early delivery is acceptable.

Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC

BLDG 506 DR 22

TINKER AFB OK 73145-8000

Duration of Contract Period: 5 Year IDIQ Contract

Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business

Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources.

In order to receive any technical data related to this acquisition, offerors must send an email request to Eric Romero at eric.romero.11@us.af.mil . Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at:

http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html .

The Government is not responsible for incomplete, misdirected, or untimely requests.**

DRAWINGS:

Contractors will need to request all needed drawings through the website JEDMICS.

JEDMICS homepage: https://jedmics.af.mil/webjedmics/index.jsp All off base contractors who need an account will need to complete the instructions at the following link:

https://jedmics.af.mil/webjedmics/splash/training/NEWCTR2875.pdf

Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production.

Export Control: N/A

This is a full and open competitive requirement to approved qualified sources.

The RMC is R1/C.

Set-aside: N/A.

The Government intends to issue solicitation FA8118-22-R-0026 on or about 28 February 2022 with a closing response date of 11 April 2022 and estimated award date of on or about 8 July 2022. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such.

Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business.

Also offerors must specify whether they are a U.S. or foreign-owned firm.

APPLICABLE TECHNICAL ORDERS

APPLICABLE TECHNICAL ORDERS

Specific Technical Orders mailto:eric.romero.11@us.af.mil http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html https://jedmics.af.mil/webjedmics/index.jsp https://jedmics.af.mil/webjedmics/splash/training/NEWCTR2875.pdf

PITCH/ROLL SCAS

YAW

SCAS

Part Number Noun Remanufacture Test Configuration L5877500-1XX Yaw SCAS

Servocylinder

TO 9H2-4-257-

2 1 Mar 2013

ATP

L5877500 (43999) Rev E

TO 9H2-4-257-

2 1 Mar 2013

A44969-1, A44969-002 Servovalve TO 9H8-30-195- 3 15 May 2013

TO 9H8-30-195-

3 15 May 2013

TO 9H8-30-195-

3 15 May 2013

3830053-102 Solenoid Valve TO 16C1-14-6-3 15 Oct 2014

TO 16C1-14-6-3

15 Oct 2014

TO 16C1-14-6-3

15 Oct 2014

General Technical Orders

TO NUMBER DATE TITLE

00-5-1 14 JUNE 2016 AF TECHNICAL ORDER SYSTEM

00-5-3 1 APRIL 2016 AF TECHNICAL ORDER LIFE CYCLE

MANAGEMENT

00-35D-54 1 SEPT 2015 USAF DEFICIENCY REPORTING,

INVESTIGATION AND RESOLUTION

OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY

NOTE: These publications are for information purposes only.

Air Force Manuals

Part Number Noun Remanufacture Test Configuration L5877400-XXX Pitch/Roll

SCAS

Servocylinder

TO 9H2-4-251-

3 15 May 2018

ATP

L5877400 (43999) Rev H

TO 9H2-4-251-

3 15 May 2018

A52703-1, A52704-1, A52703-002, A52704-002

Servovalve TO 9H8-30-191-3 15 Jul 2013

TO 9H8-30-191-3

15 Jul 2013

TO 9H8-30-191-3

15 Jul 2013

3830053-102 Solenoid Valve TO 16C1-14-6-3 15 Oct 2014

TO 16C1-14-6-3

15 Oct 2014

TO 16C1-14-6-3

15 Oct 2014

L5211050-011 Transducer Assembly

TO 9H2-4-251-3

15 May 2018

TO 9H2-4-251-3

15 May 2018

TO 9H2-4-251-3

15 May 2018

213C118-6B Differential Pressure Switch

TO 9H2-4-251-3

15 May 2018

TO 9H2-4-251-3

15 May 2018

TO 9H2-4-251-3

15 May 2018

DOCUMENT NUMBER DATE TITLE

AFI 23-101 12 DEC 2016 AIR FORCE MATERIAL

MANAGEMENT

AFJMAN 23-215 6 AUG 2001 REPORTING OF SUPPLY

DISCREPANCIES

DoD/Air Force Forms

FORM NUMBER TITLE

SF 364 REPORT OF DISCREPANCY

SF 368 QUALITY DEFICIENCY REPORT

DD1574

DD1574-1

SERVICEABLE TAG – MATERIEL

SERVICEABLE LABEL – MATERIEL

DD1577-2

DD1577-3

UNSERVICEABLE (REPAIRABLE) TAG –

MATERIEL

UNSERVICEABLE (REPAIRABLE) LABEL –

MATERIEL

DD1577

DD1577-1

UNSERVICEABLE (CONDEMNED) TAG –

MATERIEL

UNSERVICEABLE (CONDEMNED) LABEL –

MATERIEL

DD1575

DD1575-1

SUSPENDED TAG – MATERIEL

SUSPENDED LABEL – MATERIEL

AFMC FORM 158 PACKAGING REQUIREMENTS

CONTRACTOR DOCUMENTS

PART NUMBER DRAWING

NUMBER

TITLE AND DATE

N/A N/A N/A

OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL

THIS NUMBER FOR SOLICITATION REQUESTS.

Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.