SUPPLY AUTOMOTIVE SUPPLIES BENCH STOCK BID DOCS.pdf

KRISTIN E. FILERS

Clinton County Purchasing Agent Clinton County Government Center 137 Margaret Street, Suite 208 Plattsburgh, New York 12901 Phone: 518-565-4607 Fax: 518-565-4616 E-mail: kristin.eilers@clintoncountyny.gov

/s'^

® OTO& ^

B&OO , " .

®B£k&

DATE: October 8, 2025

To Whom It May Concern:

Notice is hereby given that sealed proposals are sought and requested for the following:

BID OPENING INFORMATION

NAME:

OPENING DATE:

TIME:

PLACE:

SUPPLY AUTOMOTIVE SUPPLIES - BENCH STOCK

ITEMS

Thursday, October 30, 2025

11:30 AM

Clinton County Purchasing Agent 137 Margaret Street, Suite 208 Plattsburgh, NY 12901

BID PROCEDURE INFORMATION

One copy of the complete bid shall be submitted in sealed envelopes addressed to

Clinton County Purchasing Agent County Government Center 137 Margaret Street, Suite 208 Plattsburgh, New York 12901

On the face of said envelope, the following information shall be included:

1. ) NAME AND ADDRESS OF BIDDER AND

"BID FOR SUPPLY AUTOMOTIVE SUPPLIES - BENCH STOCK ITEMS"

No contractor to whom this contract is let, granted or awarded, shall assign, transfer, convey, sublet, or otherwise dispose of same, or of his right, title, and interest herein, including the performance of this contract or the right to receive monies due or to become" due, or of his power to execute this without the prior written consent of the Clinton County Purchasing Agent. In the event that the contractor shall without prior written consent assign, transfer, convey, sublet or otherwise dispose of this contract or of his right, title and interest herein, including the performance of this contract or the right to receive monies due or to become due, or his power to execute such contract to any other person or corporations, or upon receipt by Clinton County of an attachment against the contractor, the County shall be relieved and discharged from any and all liability and obligation growing out of such contract to such contractor, and the person or corporation to which such contract shall have been assigned, his assignees, transferees or sublease shall forfeit and lose all monies theretofore earned under this contract, except so much as may be required to pay his employees.

It is the bidder's responsibility to read the attached GENERAL CONDITIONS which outline bidding rules of the Clinton County Purchasing Department.

Upon submission of bid, it is understood that the bidder has read, fully understands and will comply with said GENERAL CONDITIONS.

Bidders must complete attached Clinton County forms which include Non- Collusion Bidding Certification, Certificate of Compliance with the Iranian Divestment Act, Bidder's Statement on Sexual Harassment, Information Sheet, and Vendor Reference Sheet. If Bidder is a Corporation, an authorizing resolution of the Board of Directors must accompany the bidder's signature page. These forms must be ro erl executed and submitted with the ro osal.

Sincerely, ^Ff^Qt <Ti\<JP3.

^ristin E. Filers

Purchasing Agent

KEE

enc.

CLINTON COUNTY PURCHASING AGENT

County Government Center

137 Margaret Street, Suite 208 Plattsburgh, New York 12901

518-565-4609

GENERAL CONDITIONS

All proposals shall be made upon forms furnished by the Purchasing Agent for the County of Clinton and shall be contained in sealed envelopes and addressed to Clinton County Purchasing Agent, 137 Margaret Street, Suite 208, Plattsburgh, New York 12901.

BIDS

1. Form of proposal as issued by the County Purchasing Agent shall be completely filled in by ink or typing. No bid will be accepted which contains any changes, additions, omissions or erasures, unless otherwise stated.

2. Bidder must submit with bid detailed specifications, circulars and all necessary data on items he proposes to furnish. This information must show clearly that the item offered meets all detailed specifications herein. The Purchasing Agent reserves the right to reject any bid if its compliance with the specifications is not clearly evident. If item offered differs from the provisions contained in these specifications such differences must be explained in detail, and bid will receive careful consideration if such deviations do not depart from the intent of these specifications and are to the best interests of the County of Clinton as interpreted by the Purchasing Agent of the County of Clinton.

3. The Contractor shall pay all sales, use, excise, transportation and other taxes and fees for which he is liable under the Contract. The cost of such taxes and fees shall be included in the price, or total of several prices, given in the Bid on which the Agreement is based, and no separate payment will be made therefore.

4. All bids received after the time stated in the Notice to Bidder may not be considered and will be returned unopened to the bidder. The bidder assumes the risk of any delay in the mail or in the handling of the mail by employees of the County. Whether sent by mail or by means of personal delivery, the bidder assumes responsibility for having his bid deposited on time at the place specified.

If the bid opening location is closed on the scheduled date/time of the bid opening due to inclement weather or an emergency, the bid opening will occur on the next business day at the same time and location.

5. No interpretation of the meaning of the specifications or other contract document will be made to any bidder orally. Every request for such interpretation should be in writing, addressed to the Purchasing Agent, not later than five (5) days prior to the date fixed for the opening of bids. Notice of any and all such interpretations and any supplemental instructions will be sent to all bidders of record by the Purchasing Agent in the form of addenda to the specifications. All addenda so issued shall become a part of the contract documents.

6. The submission of a bid will be construed to mean that the bidder is fully informed as to the extent and character of the supplies, materials, or equipment required and a representation that the bidder can furnish the supplies, materials or equipment satisfactorily in complete compliance with the specifications.

Pursuant to General Municipal Law §102 and County Law §408-a, any political sub-division or fire company (as both are defined in Section 100 of the GML) or district authorized to make purchases of apparatus, materials, equipment or supplies, or to contract for services related to the installation, maintenance or repair of apparatus, materials, equipment and supplies may make said purchases by piggybacking on the award of this bid, provided that the awarded vendor agrees to do so under the same terms and conditions as stated herein.

All orders or request for services will be placed directly by the participating agency. The awarded vendor shall invoice and receive payment directly from said agency. Clinton County assumes no responsibility for purchases made by other entities.

7. If two or more bidders submit identical bids as to price, the decision of the Purchasing Agent to award a contract to one of such identical bidders shall be final. (General Municipal Law, Sec. 103, Sub. 1).

AWARD

8. The Purchasing Agent for the County of Clinton reserves the right to waive any informality or to reject any or all bids.

Clinton County reserves the right to:

. Reject any or all proposals, in whole or in part

. To make awards item by item, by category, by parts or in bulk

. To waive minor defects

. To cancel the award at any time the foregoing conditions are not complied with, or for any good and sufficient reason if deemed in the best interest of the County to do so

. To increase or decrease quantities of any/all items

. To purchase recycled goods, wherever practical, whenever it is deemed to be in the best interests of the County to do so

. To purchase items on State, County, Cooperative or other Governmental Agency contracts if such item(s) can be obtained on the same terms, conditions, specifications, and at a lower price, if applicable

. To eliminate any portion(s) of the bid in order to operate within its established budget

. To purchase the product at the quoted price during the contract period, however there are no guarantees that the County will purchase any/all items listed

9. Awards will be made to the lowest responsible bidder, as will best promote the public interest, taking into consideration the reliability of the bidder, the quality of the materials, equipment, oi- supplies to be furnished, their conformity with the specifications, the purpose for which required, and the terms of delivery.

Bids must conform to the terms set forth in the Bid Documents, as extraneous terms or material deviations (including additional, inconsistent, conflicting or alternative terms) may render the bid non-responsive and may result in rejection of the bid.

Extraneous terms submitted on standard, pre-printed forms (including but not limited to:

product literature, order forms, license agreements, contracts or other documents) which are attached or referenced with the submission shall not be considered part of the bid, but shall be deemed included for information or promotional purposes only.

10. No contract hereunder shall, either in whole or in part, be assigned, transferred, conveyed, sublet or otherwise disposed of to any other person, company or corporation unless approval is first obtained in writing from the County Purchasing Agent.

11. A contract may be canceled at the successful bidder's expense upon non-performance of contract.

DELIVERY

12. Delivery must be made in accordance with the instructions to bidders and specifications. If delivery instructions do not appear on order, it will be interpreted to mean prompt delivery. The decision of the Purchasing Agent as to reasonable compliance with delivery terms shall be final.

13. The Purchasing Agent will not accept any deliveries on Saturdays, Sundays, or legal holidays, except commodities required for daily consumption or where the delivery is for an emergency.

14. Items shall be securely and properly packed for shipment, storage, and stocking in shipping containers and according to accepted commercial practice, without extra charge for packing cases, baling, or sacks.

15. The successful bidder shall be responsible for delivery of items in good condition at point of destination. He shall file with the carrier all claims for breakage imperfections and other losses, which will be deducted from invoices. The receiving department will note for the benefit of successful bidder when packages are not received in good condition. Carton shall be labeled with purchase order or contract number, successful bidder's name and general statement of contents. Failure to comply with this condition shall be considered sufficient reason for refusal to accept the goods.

16. Unless otherwise stated in the specifications, all items must be delivered into and placed at a point within the building as directed by the shipping instructions or the Purchasing Agent. The successful bidder will be required to furnish proof of delivery in every instance.

17. Unloading and placing of the equipment and furniture is the responsibility of the successful bidder, and the County accepts no responsibility for unloading and placing of equipment. Any costs incurred due to the failure of the successful bidder to comply with this requirement will be charged to him. No help for unloading will be provided by the County, and suppliers should notify their truckers accordingly.

18. All deliveries shall be accompanied by delivery tickets or packing slips. Ticket shall contain the following information for each item delivered:

Contract Number and/or Purchase Order Number Name of Article

Item Number (if applicable) Quantity Name of the Successful Bidder

INSTALLATION OF EQUIPMENT

19. The successful bidder shall clean up and remove all debris and rubbish resulting from his work from time to time as required or directed. Upon completion of the work the premises shall be left in a neat, unobstructed condition, and the buildings broom cleaned, and everything in perfect repair and order. Old materials are the property of the successful bidder unless otherwise specified.

20. Equipment, supplies, and materials shall be stored at the site only on the approval of the Purchasing Agent and at the successful bidder's risk. In general, such on-site storage should be avoided to prevent possible damage or loss of the material.

21. Work shall be progressed so as to cause the least inconvenience to the County and with proper consideration for the rights of other successful bidders or workmen. The successful bidder shall keep in touch with the entire operation and install his work promptly.

22. Bidders shall acquaint themselves with conditions to be found at the site and shall assume all responsibility for placing and installing the equipment in the locations required.

23. Equipment for trade-in shall be dismantled by the successful bidder and removed at his expense. The condition of the trade-in equipment at the time it is turned over to the successful bidder shall be the same as covered in the specifications, except as affected by normal wear and tear from use up to the time of trade-in. All equipment is represented simply "as is". Equipment is available for inspection only at the delivery point listed for new equipment, unless otherwise specified.

GUARANTEES BY THE SUCCESSFUL BIDDER

24. The successful bidder guarantees:

(a) His products against defective material or workmanship and to repair or replace any damages or marring occasioned in transit.

(b) To furnish adequate protection from damage for all work and to repair damages of any kind for which he or his workmen are responsible, to the building or equipment, to his own work, or to the work of other successful bidders.

(c) To carry adequate insurance to protect the County from loss in case of accident, fire theft, etc.

(d) That all deliveries will be equal to the accepted bid sample.

(e) That the equipment delivered is standard, new, latest model of regular stock product or as required by the specifications; also that no attachment or part has been substituted or applied contrary to manufacturer's recommendations and standard practice. Every unit delivered must be guaranteed against faulty material and workmanship for a period of at least one year from date of delivery. If during this period such faults develop, the successful bidder agrees to replace the unit or the part affected without cost to the County. Any merchandise provided under the contract which is or becomes defective during the guarantee-period shall be replaced by the successful bidder free of charge with the specific understanding that all replacements shall carry the same guarantee as the original equipment. The successful bidder shall make any such replacement immediately upon receiving notice from the County

SAVING CLAUSE

25. The successful bidder shall not be held responsible for any losses resulting if the fulfillment of the terms of the contract shall be delayed or prevented by wars, acts of public enemies, strikes, fires, floods, acts of God, or for any other act not within the control of the successful bidder and which by the exercise of reasonable diligence he is unable to prevent.

GOVERNING LAWS & RULES

26. The Contractor shall comply with all the provisions of the laws of the County of Clinton, the State of New York and of the United States of America which affect municipalities and municipal contracts, and more particularly the Labor Law, the General Municipal Law, the Workmen's Compensation Law, the Lien Law, Personal Property Law^ State Unemployment Insurance Law, Federal Social Security Law, State, Local and

Municipal Health Law, Rules and Regulations, and any and all regulations promulgated by the State of New York and of amendments and additions thereto, insofar as the same shall be applicable to any contract awarded hereunder with the same force and effect as if set forth at length herein. The bidder's special attention is called to those laws which are set forth below:

27. Section 103-d of the General Municipal Law of the State of New York which reads as follows:

"1. Every bid or proposal hereafter made to a political subdivision of the state or any public department, agency or official thereof where competitive bidding is required by statute, rule, regulation or local law, for work or services performed or to be performed or goods sold or to be sold, shall contain the following statement subscribed by the bidder and affirmed by such bidder as true under the penalties of perjury"; Non-collusive bidding certification.

(a) By submission of this bid, each bidder and each person signing on behalf of any bidder certifies, and in the case of a joint bid each party thereto certifies as to its own organization, under penalty of perjury, that to the best of knowledge and belief:

(1) The prices in this bid have been arrived at independently without collusion, consultation, communication, or agreement, for the purpose of restricting competition, as to any matter relating to such prices with any other bidder with any competitor;

(2) Unless otherwise required by law, the prices which have been quoted in this bid have not been knowingly disclosed by the bidder and will not knowingly be disclosed by the bidder prior to opening, directly or indirectly, to any other bidder or to any competitor;

and

(3) No attempt has been made or will be made by the bidder to induce any other person, partnership or corporation to submit or not to submit a bid for the purpose of restricting competition.

(b) A bid shall not be considered for award nor shall any award be made where (a)

(1) (2) and (3) above have not been complied with; provided, however, that if in any case the 'bidder cannot make the foregoing certification, the bidder shall so state and shall furnish with the bid a signed statement which sets forth in detail the reasons therefor.

Where (a) (1) (2) and (3) above have not been complied with, the bid shall not be considered for award nor shall any award be made unless the head of the purchasing unit of the political subdivision, public department, agency or official thereof which the bid is made, or her designee, determines that such disclosure was not made for the purpose of restricting competition.

The fact that a bidder (a) has published price lists, rates or tariffs covering items being procured, (b) has informed prospective customers of proposed or pending publication of new or revised price lists for such items, or (c) has sold the same items to other customers at the same prices being bid, does not constitute, without more, a disclosure within the meaning ofsubparagraph one (a).

2. Any bid hereafter made to any political subdivision of the state or any public department, agency or official thereof by a corporate bidder for work or services performed or to be performed or goods sold or to be sold, where competitive bidding is required by statute, rule, regulation, or local law, and where such bid contains the certification referred to in subdivision one of this section, shall be deemed to have been authorized by the board of directors of the bidder, and such authorization shall be deemed to include the signing and submission of the bid and the inclusion therein of the certificate as to non-collusion as the act and deed of the corporation.'

28. NON-DISCRIMINATION AND LABOR PRACTICES

In accordance with Section 220-e of Article 8 of the State Labor Law, the Contractor agrees:

A. That in the hiring of employees for the work of this Contract or any Sub-Contract, neither he nor any Sub-Contractor, nor any person acting on behalf of the Contractor, or any Sub-Contractor, shall by reasons of race, creed, color, sex, national original, or disability discriminate against any citizen of the State of New York who is qualified and available to perform the work to which his employment relates; and

B. That neither the Contractor, nor any Sub-Contractor, nor any person on his behalf shall, in any manner, discriminate against or intimidate any employee hired for the performance of work under this Contract on account of race, creed, color, sex, national origin, or disability; and

C. That there may be deducted from the amount payable to the Contractor by the Owner, a penalty of Fifty Dollars for each person for each calendar day during which such person was discriminated against or intimidated in violation of the provisions of this Contract; and

D. That this Contract may be canceled or terminated by the Owner, and all monies due or to become due hereunder may be forfeited, for a second or any subsequent violation of the terms or conditions of this section of the Contract; and

E. That the aforesaid provisions of this section covering contracts for the manufacture, sale or distribution of materials, equipment or supplies shall be limited to operations performed within the territorial limits of the State of New York.

F. During the performance of this Contract, the Contractor agrees as follows:

1. The Contractor will not discriminate against any employee or applicant for employment because of race, creed, sex, color, national origin, or disability, and will take affirmative action to insure that they are afforded equal employment opportunities without discrimination because of race, creed, sex, color, national origin, or disability. Such action shall be taken with reference, but not be limited to: recruitment, employment, job assignment, promotion, upgrading, demotion, transfer, layoff or termination, rates of pay or other forms of compensation, and selection for training or retraining, including apprenticeship and on-thejob training.

2. The Contractor will send to each labor union or representative of workers with which he has or is bound by a collective bargaining or other agreement or understanding, a notice to be provided by the State Division of Human Rights, advising such labor union or representative of the "Contractor's agreement under subparagraphs (1) through (7) (hereinafter called "non-discrimination clauses"). If the Contractor was directed to do so by the contracting agency as part of the Bid or negotiation of this Contract, the Contractor shall request such labor union or representative to furnish him with a written statement that such labor union or representative either will affirmatively cooperate, within the limits of its legal and contractual authority, in the implementation of the policy and provisions of these non-discrimination clauses or that it consents and agrees that recruitment, employment and terms and conditions of employment under this Contract shall be in accordance with the purposes and provisions of these non-discrimination clauses. If such labor union or representative fails or refuses to comply with such a request that it furnish such a statement, the Contractor shall promptly notify the State Division of Human Rights of such failure or refusal.

3. The Contractor will post and keep posted in conspicuous places, available to employees and applicants for employment, notices to be provided by the State Division of Human Rights setting forth the substance of the provisions of subparagraphs (1 ̂ and

(2) and such provisions of the State's laws against discrimination as the State Commissioner of Human Rights shall determine.

4. The Contractor will state, in all solicitations, or advertisements for employees placed by or on behalf of the Contractor, that all qualified applicants will be afforded equal employment opportunities without discrimination because of race, creed, sex, color, national origin or disability.

5. The Contractor will comply with the provisions of Sections 291-299 of the Executive Law and the Civil Rights Law, will furnish all information and reports deemed necessary by the State Commissioner of Human Rights under these non-discrimination clauses and'such sections of the Executive Law, and will permit access to his books, records and accounts by the State Commissioner of Human Rights, the Attorney General and the Industrial Commissioner for purposes of investigation to ascertain compliance with these non-discrimination clauses and such sections of the Executive Law and Civil Rights Law.

6. This Contract may be forthwith canceled, terminated or suspended, in whole or in part, by the contracting agency upon the basis of a finding made by the State Commissioner of Human Rights that the Contractor has not complied with these non-discrimination clauses, and the Contractor may be declared ineligible for future contracts made by or on behalf of the State or a public authority or agency of the State, until he satisfies the State Commissioner of Human Rights that he has established and is carrying out a program in conformity with the provisions of these non-discrimination clauses. Such finding shall be made by the State Commissioner of Human Rights after conciliation efforts by the State Division of Human Rights have failed to achieve compliance with these non-discrimination clauses and after verified complaint has been filed with the State Division of Human Rights, notice thereof has been given to the Contractor and an opportunity has been afforded him to be heard publicly before the Commissioner of Human Rights or his designee. Such sanctions may be imposed and remedies otherwise provided by law.

7. The Contractor will include the provisions of sub-paragraph (1) through (7) of this paragraph A and in every Sub-contract or purchase order in such a manner that such provisions will be binding upon each Sub-contractor or vendor as to operations to be performed within the State of New York. The Contractor will take such action in enforcing such provisions of such Sub-contract or purchase order as the contracting agency may direct including sanctions or remedies for non-compliance. If the Contractor becomes involved in or is threatened with litigation with a Sub-contractor or vendor as a result of such direction by the Contracting Agency, the Contractor shall promptly so notify the Attorney General, requesting him to intervene and protect the interest of the State of New York.

G. It is hereby agreed that all applicable provisions of the Labor Law of the State of New York shall be carried out in the performance of this Contract.

H. This agreement shall be void and of no effect unless the Contractor shall secure compensation insurance for the benefit of, and keep insured during the life of this agreement, such employees engaged therein as are required to be insured by the provisions of the Worker's Compensation Law of the State of New York.

I. warrants that it is in compliance with the Americans with Disabilities Act (Public Law 101-336) and that it will, in carrying out the requirements of this contract, comply in all respects with the provisions of the Act and its implementing regulations.

J. Clinton County, in accordance with the provisions of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 USC subsections 2000d to 2000d-4, and Title 49^ Code of Federal Regulations, Department of Transportation, Subtitle A, Office ofjhe Secretary^ Part 21, N'ondiscrimination in Federally assisted programs of the Department of Transportation issued pursuant to such Act) hereby notifies all bidders that it will affirmatively ensure that any contract entered into pursuant to this advertisement disadvantaged business enterprises will be afforded full and fair opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, or national origin in consideration of award.

29. All vendors must comply with provisions of the Toxic Waste Right to Know Law and provide the County with any and all information as required by law (Materials Safety Data Sheets).

All regularly manufactured stock electrical items must bear the label of the Underwriter's Laboratories, Inc.

30. Bids on equipment must be on standard new equipment, of latest model and in current production, unless otherwise specified. All supplies, equipment, vehicles and materials must meet the provisions of the Occupational Safety and Health Act.

31. The form of non-collusion bidding certification following the form of proposal must be executed by the bidder and submitted with the proposal.

32. Bidders must complete attached Clinton County forms which include Information Sheet and Vendor Reference Sheet, Non-Collusion Form, Certification of Iranian Divestment Act, and Sexual Harassment Statement. If the Bidder is a corporation, an authorizing resolution passed by the Bidder's board of directors, and with the corporate seal affixed, must accompany the signature page of the bid documents. These forms must be submitted with the proposal.

END OF SECTION

CLINTON COUNTY HIGHWAY DEPARTMENT

736 STATE ROUTE 3

PLATTSBURGH, NY 12901

(518) 565-4040

BID PROPOSAL

SUPPLY AUTOMOTIVE SUPPLIES-BENCH STOCK ITEMS

Bids are being solicited to supply bench stock items such as automotive and other parts and inventory supplies as used by the Clinton County Highway Department to maintain its vehicle fleet and properly maintain County roadways.

1. BID AWARD:

Bids will be determined for each individual item; therefore, several vendors are expected to be awarded a portion of the bid.

Award shall be made to the lowest responsible bidder(s). The cost analysis shall be conducted by the "Clinton County Highway Department and the County Highway Superintendent shall make the final determination of lowest bid cost and recommendation for award.

The County reserves the right to make multiple awards, accept or reject any and all bids, or separable portions of offer for any and all items included in this proposal.

2. ORDERS:

The County does not make any claims as to minimum quantities to be^ purchased. Purchase Orders for'items in this bid will be placed on as as-needed basis, therefore; the County is not obligated to purchase a specific quantity of any item. All prices contained herein are inclusive of transportation and handling costs and invoices shall be based on the bid prices.

3. DELIVERY OF ITEMS:

Deliveries are to be made to the Clinton County Highway Department, Plattsburgh, Clinton County, New York, within two weeks of orders bein

4.

736 Route I d.

3, BID TERM:

The Bid Term for all items and sen/ices shall be from January 1, 2026 through December 31, 2026. Bidders will be expected to hold their bid pricing throughout the duration of the term.

5. PAYMENT METHOD:

The County agrees to pay the awarded Bidder as per Bidder's bid price sheet. Said prices shall remain fixed throughout the duration of this contract.

Any discounts must be specified on the bid form (e.g., early payment).

The awarded Bidder shall submit an itemized invoice to the Clinton County Highway Department. The County will pay the amount due within thirty (30) days after receipt of an itemized invoice.

6. QUESTIONS ON BID PROPOSAL:

Questions on this Bid Proposal may be directed to Kristin Filers, Clinton County Purchasing Agent, in writing only, to Kristin. Filers clintoncoun n . ov.

CCHD

Part #

CH535A

CH011D

CH774C

CH049C

CH075B

CH810C

CH181A

CH167A

CH362C

CH363C

CH361C

CH615B

CH278A

CH325A

CH478A

CH370A

CH015E

CH056D

CH861C

CH646A

CH998A

CH766A

CH768A

CH767A

CH910C

CH909C

CH874B

CH736C

CH908C

CH561A

ABSORBENT, OIL 40LB BAG

ADJUSTER, SLACK AUTOMATIC

ADJUSTER, SLACK AUTOMATIC

ALARM, ELECTRIC BACKUP PRE250

ALTERNATOR, VOHL SNOW BLOWER

ANTENNA

ANTI-FREEZE, AIR BRAKE 320Z

ANTt-FREEZE, GASOLINE 120Z

AUGER, HARDENED DRIVE-IN

AUGER, HARDENED DRIVE-IN

AUGER, HARDENED FISHTAIL POINT

BALLAST, FLUOR 4 LAMP 32 WATT

BALLAST, FLUOR 8G1004WF

BATTERY, 6 VOLT FLASHLIGHT SPCLE

BATTERY, CLEANER PROTECTOR

BATTERY, GROUP 31

BATTERY, GROUP 47

BATTERY, GROUP 49

BATTERY, GROUP 65

BEACON, AMBER MINI LIGHT BAR

BEARING, IDLER DRUM FRONT

BEARING, SANDER FRONT A/F

BEARING, SANDER FRONT H/L

BEARING, SANDER REAR A/F

BELT, ALTERNATOR/AC

BELT, ALTERNATOR/AC/WTR PUMP

BELT, CONDITIONER

BELT, FAN

BELT, FAN

BELT, FAN DRIVE

Clinton County Highway Department 736 State Route 3

Plattsburgh, NY 12901

Description

PN: R801073

PN:R803110

MUST BE 102 DB

PN:SE501357 OLDAR40420

PN: 349037 MOTOROLLA

FOR ETHANOL GAS

WISDOM TOOTH PN: 82-P2-12

CHISEL TOOTH PN: 82-P2-21

3 1/2" PN: 82-P2-13

4F32T8-120

2 LAMP FIXTURE FT96T12/F72T12

PN: 31-MHD 12 VOLT RUCK

810 CRANKING AMPS/650 COLD CRAt

PN:49H8 NEW CHEVY TAHOE

PN: 65-6 12 VOLT FORD

FEDERAL SIGNAL PN: 450142-02

SANDER-2BOLT FLANGE PN: UCFT207-20RM

AIR FLO SANDER PN F508

HIGHLANDER SANDER PN: AA3039

AIR FLO SANDER PN: T40166

GATES K080630HD

GATES K080855HD

CRC 05350 OR EQUAL

GATES: K120786HD

FREIGHTLINER 01-27116-012/GATES: K080660

GATES 9745HD

Bid Amount

Each Each

Each

Each

Each Each

Each

Each

Each

Each

Each Each

Each

Each

Each Each

Each Each

Each

Each

Each

Each

Each Each

Each

Each

Each

Each

Each

Each

CH024D

CH383A

CH500B

CH439B

CH015D

CH668C

CH669C

CH680C

CH808C

CH043E

CH492B

CH443B

CH069B

CH100B

CH030A

CH050D

CH047E

CH057D

CH902C

CH421B

CH220B

CH422B

CH974B

CH020A

CH024A

CH019A

CH152A

CH645C

CH657C

CH059E

CH045F

CH041D

CH841C

CH842C

BELT, V TAMPERS

BLADE, BAND SAW

BLADE, CHIPPER 4 PER SET

BLADE, CONCRETE/ASPHALT CUTTER

BLADE, CUTTING EDGE

BLADE, CUTTING EDGE

BLADE, CUTTING EDGE

BLADE, CUTTING EDGE WING

BLADE, CUTTING EDGE

BLADE, CUTTING EDGE

BLADE, DEMOLITION SAW CONCRETE

BLADE, DEMOLITION SAW STEEL

BLADE, ELECTRIC HACKSAW-STEEL

BLADE, GRADER 6"X72"

BLADE, HACKSAW 12 X 1/2 X 24 TEETH

BLADE, PLOW BUILT BLADE WEARPLATE

BLADE, PLOW BUILT BLADES SLUSHER

BLADE, PLOW BUILT BLADES WING

BLADE, PLOW FISHER X-TREME V

BLADE, SAWZALL METAL 6"-24TPI

BLADE, STEEL CUT 14"X1"X3/32"

BLADE, UTILITf KNIFE

BLADE, WIPER 13"

BLADE, WIPER 14"

BLADE, WIPER 15"

BLADE, WIPER 16"

BLADE, WIPER 18"

BLADE, WIPER 20"

BLADE, WIPER 22"

BLADE, WIPER 22"

BLADE, WIPER 24"

BLADE, WIPER 28"

BLOCK, ADAPTER

BLOCK, REAR WING

Description

NAPA 4L350W MUST BE GREEN/GATES:6835 $

89"X1/2"-.035-14 $

PN: 900-9900-02 $

DIAMOND BLADE 14" X.125 $

GRADALL: 80653027 3/4" X 8 X 61. 5" W/10-3/4" BOLT HOLES 3, 9 6>3 $

GRADALL: 8065-3025 $

GRADALL: 8095-1419 $

PN:S.75848-6CP $

T157492 & T146672 2 EA= 1 SET $

CASE PN: 8500177 1 & 8500178 2 3 TOTAL = SET $

SIZE 14" $

SIZE 14" 5,400 MAX RPM NORTON 37841 $

11'X6"X1".03510/14T $

T66702 2 EA= 1 SE TAYLOR PN: 5D9553 2 EA= 1 SET $

EBT-SAB-WP-24 H SABRE $

SET =(1) 24", (1) 36" & (2) 48" SABRE HEAW-DUTr BLADE $

SET = (1) SAB-WP-H-24, (1) SAB-36-HD, (1) SAB-48-HDMR, (1) SAB-48-HD $

5/8" X 9-1/2' $

FOR CHOP SAW $

IF BIDDING A PACK, PLEASE PROVIDE COUNT PER PACK $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

CONTOUR/CURVED ANCO $

MUST BE PN: 830322 RAIN-X LONGITUDE $

CONTOUR/CURVED ANCO $

REGULAR BOLT ON $

PN:11403021 $

PN: 11203002 $

Page2

Bid Amount

Each

Each

Each

Each Each

Each

Each

Each

Set

Set

Each

Each

Each

Set Each Each

Set Set

Set

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

Each

CH083A

CH084A

CH199B

CH501B

CH006F

CH613C

CH615C

CH614C

CH616C

CH488B

CH617C

CH618C

CH612C

CH112A

CH176B

CH588C

CH898A

CH590C

CH591C

CH894A

CH592C

CH589C

CH847B

CH778C

CH624C

CH625C

CH626C

CH627C

CH181B

CH182B

CH183B

CH601C

CH603C

CH602C

BOLT, CARRIAGE 5/8" X 4"

BOLT, CARRIAGE 5/8" X 5"

BOLT, CARRIAGE 5/8" X 6"

BOLT, CHIPPER BLADE

BOLT, HEX HEAD 1"X 3"

BOLT, HEX HEAD 1/2" X1"

BOLT, HEX HEAD 1/2" X 1-1/2"

BOLT, HEX HEAD 1/2" X 1-1/4"

BOLT, HEX HEAD 1/2" X 2"

BOLT, HEX HEAD 1/2" X 2-1/2"

BOLT, HEX HEAD 1/2" X 2-1/2"

BOLT, HEXHEAD1/2"X3"

BOLT, HEX HEAD 1/2" X 3/4"

BOLT, HEX HEAD 1/2" X 4-1/2"

BOLT, HEX HEAD 1/4"X1"

BOLT, HEX HEAD 1/4" X 1/2"

BOLT, HEX HEAD 1/4" X 1-1/2"

BOLT, HEX HEAD 1/4" X 1-1/4"

BOLT, HEX HEAD 1/4" X 2"

BOLT, HEX HEAD 1/4" X 2-1/2"

BOLT, HEXHEAD1/4"X3"

BOLT, HEX HEAD 1/4" X 3/4"

BOLT, HEX HEAD 1/4" X 3-1/2"

BOLT, HEX HEAD 1-1/2" X 5-1/2"

BOLT, HEX HEAD 3/4" X1"

BOLT, HEX HEAD 3/4" X 1-1/2"

BOLT, HEX HEAD 3/4" X 2"

BOLT, HEX HEAD 3/4" X 2-1/2"

BOLT, HEX HEAD 3/4" X 2-1/4"

BOLT, HEX HEAD 3/4" X 2-3/4"

BOLT, HEX HEAD 3/4" X 3"

BOLT, HEX HEAD 3/8" X1"

BOLT, HEX HEAD 3/8" X 1-1/2"

BOLT, HEX HEAD 3/8" X 1-1/4"

Description

GRADE 5

GRADE 5

GRADE 5

PN: 900-4900-53

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 8 FINE

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 8

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

P. g. 3

Bid Amount

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

CH604C

CH605C

CH606C

CH600C

CH595C

CH593C

CH597C

CH596C

CH598C

CH599C

CH901A

CH594C

CH619C

CH638C

CH620C

CH621C

CH622C

CH623C

CH540C

CH607C

CH608C

CH609C

CH610C

CH611C

CH489B

CH893A

CH681C

CH070A

CH071A

CH073A

CH074A

CH642C

CH656C

CH072A

BOLT, HEX HEAD 3/8" X 2"

BOLT, HEX HEAD 3/8" X 2-1/2"

BOLT, HEX HEAD 3/8" X 3"

BOLT, HEX HEAD 3/8" X 3/4"

BOLT, HEX HEAD 5/16" X1"

BOLT, HEX HEAD 5/16" X 1/2"

BOLT, HEX HEAD 5/16" X 1-1/2"

BOLT, HEX HEAD 5/16" X 1-1/4"

BOLT, HEX HEAD 5/16" X 2"

BOLT, HEX HEAD 5/16" X 2-1/2"

BOLT, HEX HEAD 5/16" X 3"

BOLT, HEX HEAD 5/16" X 3/4"

BOLT, HEX HEAD 5/8" X1"

BOLT, HEX HEAD 5/8" X 1-1/2"

BOLT, HEX HEAD 5/8" X 1-1/4"

BOLT, HEX HEAD 5/8" X 2"

BOLT, HEX HEAD 5/8" X 2-1/2"

BOLT, HEX HEAD 5/8" X 3"

BOLT, HEX HEAD 7/16 X 1-1/2

BOLT, HEX HEAD 7/16" X 1"

BOLT, HEX HEAD 7/16" X 1-1/4"

BOLT, HEX HEAD 7/16" X 2"

BOLT, HEX HEAD 7/16" X 2-1/2"

BOLT, HEX HEAD 7/16" X 3"

BOLT, HEX HEAD 9/16" X 2-1/4"

BOLT, HEX LAG 1/4" X 2-1/2"

BOLT, PLOW 1"X 3"

BOLT, PLOW 1/2" X 1-1/2"

BOLT, PLOW 1/2"X 2-1/4"

BOLT, PLOW1/2"X3"

BOLT, PLOW 1/2" X 3-1/2

BOLT, PLOW 1/2" X 4"

BOLT, PLOW 1/2" X 8"

BOLT, PLOW 1/2"X 2-1/2"

Description

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 8 FINE

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5

GRADE 5 SHAKER

GRADE 5

GRADE 5 GRADER

Bid Amount

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

CH536B

CH273A

CH075A

CH076A

CH996A

CH897C

CH057F

CH077A

CH855C

CH374A

CH902A

CH137A

CH376A

CH375A

CH957A

CH260A

CH123B

CH125B

CH679C

CH936C

CH937C

CH603A

CH733A

CH727A

CH055A

CH681A

CHOOSE

CH281A

CH605A

CH280A

CH892C

CH419C

CH183A

CH141C

BOLT, PLOW 3/4" X 2-1/2"

BOLT, PLOW 3/4" X 3"

BOLT, PLOW 5/8" X 1-1/2"

BOLT, PLOW 5/8" X 2"

BOLT, PLOW 5/8" X 2-1/2"

BOLT, PLOW 5/8" X 3"

BOLT, PLOW 5/8" X 3-1/2"

BOLT, PLOW 5/8" X 3-1/2"

BOLT, PLOW 5/8" X 5"

BOLT, PLOW 7/8" X 3-1/4"

BOLT, ROAD FLASHER 4-1/2"

BOLT, STARTER 5/8" X 1-1/2"

BRACKET, MIRROR 18 1/2"CLAMP

BRACKET, MIRROR 18" BOLT-THRU

BRACKET, YOKE DRIVE SHAFT

BRAKE, CHAMBER TfPE 30 WHOLE

BRAKE, CLEVIS ASSY 1/2" PIN

BRAKE, CLEVIS ASSY 5/8" PIN

BRAKE, CLEVIS ASSY DUAL PIN

BRAKE, CLEVIS GREASABLE 1/2"

BRAKE, CLEVIS GREASABLE 5/8"

BRAKE, CONTROLLER

BRAKE, DIAPHRAGM 8"

BRAKE, DUST SHIELD REAR

BRAKE, KIT EUC E2769S

BREAKER, CIRCUIT 10 AMP SPADE

BREAKER, CIRCUIT 20 AMP POST

BREAKER, CIRCUIT 20 AMP SPADE

BREAKER, CIRCUIT 30 AMP POST

BREAKER, CIRCUIT 30 AMP SPADE

BREAKER, CIRCUIT 50 AMP POST

BREATHER, DIFFERENTIAL

BROOM, 16" STIFF BRISTLE WITH HANDLE

BROOM, BAH BLACK

Description

GRADE 5 GRADER

GRADE 5

GRADE 5

GRADE 5 GRADER

GRADE 5

GRADE 5 GRADER

FLAT HEAD

GRADE 5 SHAKER

SHAKER UNPLATED

GRADE 5

PN:482198C2

NAPA: 97726

PN: 3030SCB20

PN:11MM018-1/2

PN: 11M018-5/8

R810019

PN: 80322

PN: 70341

DRAW-TITE 5100

PN:#871934R1

PN: A13236Q2123

"S" SERIES TRUCKS

P/N; CB6409

P/N:CB6411

P/N: CB6322

P/N: CB6413

INT'L: -91916R91

POLY STREET BROOM

PN: LB140 Ti^MCO 600 AIR SWEEPER

P. a. 5

Bid Amount

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

CH140C

CH949A

CH378A

CH521B

CH546C

CH713B

CH517B

CH503B

CH504B

CH505B

CH379A

CH066B

CH113A

CH888C

CH486C

CH564C

CH541C

CH499B

CH515A

CH654B

CH472A

CH640A

CH141B

CH648A

CH968A

CH647A

CH230A

CH073B

CH900C

CH440B

CH866C

CH702A

CH556A

CH700A

BROOM, GUTTER

BROOM, HYD CYLINDER-RAISE

BROOM, PUSH W/HANDLE 24"

BROOM, WAFERS 7'

BRUSH, 18" BLACK TOP WITH HANDLE

BRUSH, FLOOR INDOOR 36"

BRUSH, PAINT 1-1/2" #0602124 ALL PURPOSE

BRUSH, PAINT 2 1/2" #0602126 ALL PURPOSE

BRUSH, PAINT 3" #0602127 ALL PURPOSE

BRUSH, PAINT 4" #0602128 ALL PURPOSE

BRUSH, TRUCK WASH W/HANDLE

BRUSH, WIRE

BULB, DROPLIGHT AUTO SERVICE

BULB, HI INTENSIPi'24V AMBER

BULB, LIGHT P/N MH400/U

BULB, LIGHT MH250/U BT 28

BUMPER, HOOD REST PN:472697C1

BUZZER, LOW AIR WARNING

CABLE, FIBER CORE 1/2"

CABLE, TRAILER ELECT 6-WIRE

CALCIUM CHLORIDE FLAKE 50LB

CAP, OIL TANK W/SCREEN

CAP, RADIATOR INT# 387970C1

CHAIN, SAW 3/8 PITCH .050

CHAIN, SAW 3/8-73LC .058

CHAIN, SAW 35 PITCH . 063

CHAIN, SAW OREGON 33SL.325.050

CHAIN, TRANSPORTATION 1/4"

CHAIN, TRANSPORTATION 3/8

CHAIN, TRANSPORTATION 5/16"

CHAPS, SAFETY CHAINSAW

CLAMP, BAND EXHAUST 2-1/4"

CLAMP, BAND EXHAUST 3"

CLAMP, BAND EXHAUST 3-1/4"

Description

4 SECTIONS=SET LB700

SWEEPSTERPN: 03-1928

20 WIRE WAFERS & 21 POLY WAFER

FOR TACK COAT

POLY-BRISTLE BLEND WOODEN HANDLE PREMIER 1942

POLY-BRISTLE BLEND WOODEN HANDLE PREMIER 1944

POLY-BRISTLE BLEND WOODEN HANDLE PREMIER 1945

POLY-BRISTLE BLEND WOODEN HANDLE PREMIER 1947

MUST BE 10" WIDE

75 WATT ROUGH SURFACE

OTC 3642-10

ALL INT TRUCKS

PN:1688312C1

PN: TFA005715 HYDRAULIC TANKS/SANDERS

2500 SERIES

GRADE 70

GRADE 70

GRADE 70

FLAT

FLAT

FLAT

Bid Amount

Set Each

Each

Set

Each

Each Each

Each

Each

Each

Each

Each

Each

Each

Each Each

Each

Each Per Foot

Per Foot

Each Each

Each Per Foot

Per Foot

Per Foot

Per Foot

Per Foot

Per Foot

Per Foot Each

Each

Each

P. g.6

CH699A

CH698A

CH761A

CH819C

CH908A

CH909A

CH907A

CH910A

CH965B

CH966B

CH911A

CH967B

CH444B

CH905A

CH906A

CH686A

CH904A

CH026F

CH869B

CH870B

CH377A

CH727C

CH093A

CH323A

CH639C

CH648C

CH673C

CH705A

CH914A

CH915A

CH875B

CH654A

CH265A

CH266A

Description

CLAMP, BAND EXHAUST 4"

CLAMP, BAND EXHAUST 5"

CLAMP, CABLE 1/2" PLOW WING

CLAMP, CABLE 5/8"

CLAMP, HOSE LD-10

CLAMP, HOSE LD-12

CLAMP, HOSE LD-16

CLAMP, HOSE LD-20

CLAMP, HOSE LD-28

CLAMP, HOSE LD-32

CLAMP, HOSE LD-36

CLAMP, HOSE LD-40

CLAMP, HOSE LD-52

CLAMP, HOSE LD-6

CLAMP, HOSE LD-8

CLAMP, HOSE LM-4 7/32" - 5/8

CLAMP, HOSE LM-6 5/16" - 7/8"

CLEANER, AMMONIA

CLEANER, BRAKE

CLEANER, CARBURETOR SPRAY

CLEANER, DEGREASER SPRAY

CLEANER, FOAM SPRAY

CLEANER, GLASS & SURFACE

CLEANER, HAND - AWESOME ORANGE

CLEANER, HAND - MAGIC

CLEANER, HAND - SCRUBS/BUCKET

CLEANER, TRUCK WASH

CLEANER, VEHICLE INSIDE

CLEVIS SHACKLE 3/8" NR 8

CLEVIS SHACKLE 5/8" J7V

CONDITIONER, AIR TOOL OIL

CONNECTOR, BUTT ELEC 12-10

CONNECTOR, BUTT ELEC 16-14 GA

CONNECTOR, BUTT ELEC 22-18 GA

FLAT

FLAT

M250

PN:43429

GALLON

MUST BE CRC RED

MUST BE CRC FOR ETHANOL GAS

32 OZ SPRAY BOTTLE MUST BE AWESOME ORANGE

LYSOL

PROVIDE SIZE/OUNCES MUST BE IN A CAN

1 GALLON PUMP CONTAINER

120 OZ

WYPAL OR COMPARABLE PROVIDE COUNT

5-GALLON PAIL MUST BE ENVIORMENTAL GREEN

3M LEATHER AND VINYL CLEANER NAPA 39040

PROVIDE SIZE/OUNCES

NYLON

NYLON

NYLON

Bid Amount

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

CH542C

CH580C

CH190B

CH616B

CH529A

CH441B

CH442B

CH710C

CH709C

CH053E

CH053D

CH331A

CH064B

CH474B

CH243A

CH097B

CH098B

CH872B

CH873B

CH765B

CH532C

CH831C

CH833C

CH832C

CH830C

CH435A

CH873C

CH874C

CH321A

CH600A

CH133B

CH056F

CH617B

CH750A

CONNECTOR, BUTT HEAT/SEAL 14-16

CONNECTOR, BUTT HEAT/SEAL 18-22

CONNECTOR, ELECT SPADE 16-14

CONNECTOR, ELECT SPADE 16-14

CONNECTOR, HEADLAMP 3 PRONG

CONNECTOR, TRAILER 6-WAY FEMALE

CONNECTOR, TRAILER 6-WAY MALE

CONNECTOR, TRAILER 7-PIN FEMALE

CONNECTOR, TRAILER 7-PIN MALE

CONNECTOR, TRAILER RV FEMALE

CONNECTOR, TRAILER RV MALE

CONNECTOR, TRAILER WIRE 4-WAY M/F

CONNECTOR, TRAILER WIRE 6-WAY M/F

CORD, MASON'S LINE #18 NYLON 250' ROLL

COUPLER, AIR QUICK CONN FEMALE

COUPLER, QUICK HYD 1/2"

COUPLER, QUICK HYD 3/4"

COVER, DUST CAPS/PLUGS MALE

COVER, DUST/CAPS PLUGS FEMALE

COVERALLS, WHITE X-LARGE

COVERALLS, WHITE XXX-LARGE

CUTTER, PLASMA CAP

CUTTER, PLASMA ELECTRODE

CUTTER, PLASMA NOZZLE 60A

CUTTER, PLASMA SHIELD

DISC, GRINDING 7/8" X 7"

DISK, SPINNER HARDER

DISK, SPINNER TARCO

DROPCLOTH, PLASTIC 9'X12'

EARPLUG, PROTECTIVE

EMERYCLOTH, 1-1/2" X 180"

FABRIC, FILTER 15' X 360'

FENCE, SILT 3' X 54' W/POST

FILE, CHAIN SAW 3/16"

Description

PN:95365

PN: 95364

FEMALE INSULATED

MALE INSULATED

NAPA#6246

PN: 15-600

PN: 15-630 NOTECHTRON WITH SPRING

PN:1663570C1

PN:483509C1

NAPA 755-1526

NAPA 755-1527

PN: TC6568

PN: 755-1573

FLORESCENT YELLOW OR ORANGE

1/4" HOSE DYNAFLO 430101

PN: H4-62

PN: H6-62

PN: H8-65M

PN: H8-66M

T»VEK

TYVEK

HYP 120928

HYP 120926

HYP 120931

HYP 120929

36 GRIT NORTON #34020

PN: 1E00. 12. 00

PN: B-20774-1

MEDIUM

MUST BE ON NYS DOT APPROVED VENDOR LIST

MUST BE ON NYS DOT APPROVED VENDOR LIST

P. g. 8

Bid Amount

$ Each

$ Each

$ Each

$ Each $ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Pair $ Each

$ Each

CH749A

CH616A

CH007D

CHOOSE

CH009F

CH020E

CH021E

CH021F

CH023D

CH025F

CH029E

CH029F

CH032E

CH032F

CH035D

CH036F

CH037E

CH037F

CH038F

CH046E

CH048D

CH050E

CH052F

CH054D

CH055E

CH059E

CH060F

CH061E

CH061F

CH198B

CH226C

CH227C

CH238A

CH355A

FILE, CHAIN SAW 7/32"

FILE, FLAT 6" MILL BAST

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

Description

NAPA:9082/LB:CAF24016/BLD:PA5359/WIX:49082

BOBCAT:7008043/NAPA:500035/DON:P628328

BOBCAT:7008044/NAPA:500045/BLD:RS5748

NAPA:6935/PUROLATOR:A25699/BLD:PA4321

JD:AT178516 JOHN DEERE ONLY

JD:AT178517 JOHN DEERE ONLY

NAPA:550236/BLD:PA5710

NAPA:9084/BLD:PA4681

NAPA:9088/INTERNATIONAL: 3551814C1 /BLD: RS4862

INTERNATIONAL: 3551815C1 /NAPA:9089/BLD: RS4863

NAPA:200679/FORD:HC3Z-9601-A/BLD:PA10061

NAPA:200697/FORD: HC3Z-9601-B/BLD/PA10068

NAPA: 6438/DON:P821575-1

NAPA:2055/PA657

FLT:AF26120/NAPA:9035

FLT:AF26121/NAPA:9036

NAPA:4466/INT'L:3839141C1/BLD:PA5679

NAPA:2443/HONDA17210-ZE3-505/BLD:PA3957

NAPA:500925/DON:P634517/BLD:CA30132

NAPA:200906/BLD:PA10427

BLD: PA10103

NAPA:200942/BLD:PA10417/ACDELCO:A3244C

ALLIANCE: RD3 8821 0

JD:SU20768 JOHN DEERE ONLY

JD:RE195491 JOHN DEERE ONLY

JD:RE198488 JOHN DEERE ONLY

JD:RE253519 JOHN DEERE ONLY

LB:LAF1246/NAPA:2126/HST:AF132K/BLD:PA1681-FN

LB:LAF1793/NAPA:2769/DON:AF1966/BLD:PA2489

LB: LAF222/NAPA:2222/HST:AF129K/BLD: PA1667-FN

LB:LAF9545/NAPA:2253/HST:AF608/BLD:PA2521

LB:LAF1275/NAPA:6360/HST:AF133K/BLD:PA1690-FN

Bid Amount

$ Each

$ Each

$ Each

$ Each

$ Each $ Each $ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

CH369C

CH386C

CH420C

CH424B

CH433B

CH443C

CH471A

CH487C

CH494C

CH523B

CH537C

CH547C

CH559C

CH700C

CH715C

CH716C

CH720C

CH721C

CH724C

CH746C

CH747C

CH752C

CH776C

CH777C

CH785C

CH790C

CH791C

CH804C

CH840C

CH856C

CH864C

CH882C

CH883C

CH896C

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

FILTER, AIR

Description

NAPA:2323/HONDA:17210-ZE1-517/BLD:PA4820

CAT:1G-7197/NAPA:2233/BLD:PA4093

LB:LAF1820/NAPA:6232/HST:AF656/BLD:PA2575

LB:LAF1394/NAPA:6375/HST:AF556/BLD:PA2570

LB: LAF6300/NAPA:2776/HST:AF485

LB:LAF8552/NAPA:6530/HST:AF482/BLD:PA2431

LB:LAF9544/NAPA:2491/HST:AF594/BLD:PA2525

LB: LAF8434/TOYOTA: 17741 -U2100-71/NAPA:6489/BLD: RS3549

JD: MIU11376 OLD PN: M117254 JOHN DEERE ONLY

LB:AF1032A/NAPA:6134/HST:AF878/BLD:PA2152

JD:AT220822 JOHN DEERE ONLY

LB:LAF4501/NAPA:6479/HST:AF2200/RS3504

LB:LAF1878/NAPA:6433/HST:AF2093/BLD:RS2863

LB:LAF5871/NAPA:6458/HST:AF2294/BLD:RS3738

JD:AT300487 JOHN DEERE ONLY

JD:AT314583 JOHN DEERE ONLY

JD:T168220 JOHN DEERE ONLY

JD:T15647UOHN DEERE ONLY

LB:AF1615/NAPA:6418/HST:AF484/BLD:PA4075

NAPA:2209/HST:AF219/BLD:PA1893

NAPA:2208/HST:AF218/DON:AF424/BLD:PA1885

NAPA:6459/HST:AF2370/BLD:RS3739

NAPA:6770/HST:AF2361

NAPA:6771/HST:AF2362

NAPA:6531/HST:AF483/BLD:PA2432

NAPA:6562/FORD:47132343/HST:AF2270/BLD:RS3544

NAPA:6529/FORD:47132346/BLD: RS3545

NAPA:2047/HST:AF104/BLD:PA1615

LB: LAF9201/NAPA:9126/VOLVO 20882320/BLD: RS4642

LB: 2883/NAPA:9883/HST:AF1333/BLD: PA4323

LB:LAF6265/DON:P607965/NAPA:2812/BLD:CA5368

JD: AT307501 JOHN DEERE ONLY

JD:AT191102 JOHN DEERE ONLY

LB:AF1518/NAPA:2488/BLD:PA4113

Bid Amount

$ Each

$ Each

$ Each

$ Each $ Each

$ Each $ Each

$ Each $ Each

$ Each $ Each

$ Each $ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

CH934C

CH189B

CH009D

CH022E

CH024F

CH028F

CH029D

CH032D

CH035E

CH035F

CH037D

CH038D

CH038E

CH060D

CH136B

CH169A

CH229C

CH232C

CH301C

CH321C

CH384C

CH400A

CH411C

CH458C

CH468C

CH497A

CH536C

CH538C

CH547A

CH560C

CH696C

CH718C

CH719C

CH748C

FILTER, AIR

FILTER, COOLANT

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

FILTER, FUEL

Description

BLD:PA5404/CQ:93294

LB:LFW4071/NAPA:4071/HST:WC6/BLD:BW5071

NAPA:3192/BOBCAT:6667352/BLD:BF1257

JD:RE556406 KIT JOHN DEERE ONLY

MERC:A4720900451/NAPA:6000103/BLD:PF9908KIT

MUST BE INTERNATIONAL 3004473C93 OR NAPA:3991

INTERNATIONAL: 3004474C92/NAPA:3448/BLD:PF7939

FORD: HC3Z-9N184-C/NAPA:300458/BLD:PF46174 KIT

NAPA:3011/B1SB1358/BLD:BF7903

NAPA:4006/BLD:BF955

NAPA:600564/FLT:FF63009/BF63000

KOMATSU:600-311-2110/NAPA: 308218

FLT:FS1003-NAPA:3604/BLD:BF1293-SPS

JD: 115390 JOHN DEERE ONLY

LB:LFF8062/NAPA:3472/HST:FF898/BLD:BF1226

LB:LFP440F/NAPA:3352/HST:FF984BLD:BF970

JD:RE62418 JOHN DEERE ONLY

PN:20-6000 AMPER /TAYLOR:AP394358

LB: L3102F/NAPA: 3546/CAT: 1 59-6102

LB:LFF3417/NAPA:3357/HST:FF1014/BLD:BF1280

NAPA:3361/CAT:813242

LB:LFF8020/NAPA:3405/HST:FF863/BLD:BF1212

NAPA:4029/HST:FF1078/CIM-TEK:70015/BLD:BF7645

LB:LFF3521/NAPA:3358/HST:FF1008/BLD:BF988

LB: FP570F/NAPA-.3395/BLD: BF789

LB:P1130/NAPA:3370/HST:FF996/BLD:BF909

JD:AR86745 JOHN DEERE ONLY

JD:RE508633 OLD JD:RE65431 JOHN DEERE ONLY

LF:L296F/NAPA:3166/HST:FF963/BLD:BF825

LB:LFF3584/NAPA:3690/HST:FF1077/BLD:BF7644

LB:LFF8064/NAPA:3412/HST:FF1042

JD:RE509036 JOHN DEERE ONLY

JD:RE509032 JOHN DEERE ONLY

LB:L870F/NAPA:3634/HST:FF1144/WIX:33634/BLD:PF7735

P. g. 11

Bid Amount

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each

$ Each $…