Superior Exit Bar Kit.pdf

CHAIN LINK FENCES AND GATES 32 31 13

DAC Industries, Inc.

Spec-Data® is a registered trademark of Reed Elsevier Inc. The ten-part Spec-Data format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ©2016 CMD Group, LLC. All Rights Reserved.

1. Product Name ��6045 Superior Exit Bar Kit

2. Manufacturer DAC Industries, Inc.

600 11th St NW.

Grand Rapids, MI 49504

Phone: 616-235-0140 800-888-9768

Fax: 616-235-2901

3. Product Description Basic Use Used on gates where emergency egress is needed. Typically used on outdoor storage areas, schools, outdoor seating areas and dangerous work environments.

The 6045 Superior Exit Bar Kit consists of:

��DETEX® exit bar*

��Lock box

��Keyed cylinder w/two keys

��Adjustable receiver bracket

��Mounting plate

��All required fasteners/screws

*DETEX is a registered trademark of the Detex Corporation.

Composition and Materials Detex exit bar: � anodized aluminum, has an acrylonitrile butadiene styrene (ABS) housing with a stainless steel latching bolt. ABS is a thermoplastic polymer.

Lock box: fabricated from 16 gauge steel. Black or silver.

Guard: fabricated from 16 gauge steel. Black or silver.

Adjustable receiver bracket: � fabricated from A36 1⁄4 inch hot rolled, pickled and oiled (HRPO) steel. Black or silver.

Mounting plate: � fabricated from electro-galvanized, 16 gauge hot-dipped, cold rolled A40 steel. Black or silver.

Benefits Eliminates day-long fabrication. Provides a more finished appearance, and is both faster and simpler to install than a custom exit bar system fabrication.

Product Limitations Check with local building codes before installation on swimming pool enclosures. Recommended for secondary emergency exit gates in pool fencing. Can be used in double gate installation with use of a lockable drop rod or removable center post, but works best on single gate application.

mailto:info%40dacindustries.com?subject=Inquiry%20from%20CMD%27s%20SpecData http://www.dacindustries.com

Spec-Data® is a registered trademark of Reed Elsevier Inc. The ten-part Spec-Data format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ©2016 CMD Group, LLC. All Rights Reserved.

Grades Detex panic bar Grade 1, Type 1.

Dimensions (W × H × D)

Detex exit bar: 36 or 48 × 83⁄8 × 31⁄4 inches.

Lock box: � 2 × 2 × 2 inches; (will accept rim type cylinder): also, IC housings available.

Guard: � 24 × 4 inch plate; closes gap between gate post and gate frame.

Adjustable receiver bracket: � one-inch optimal; adjustable for gate gaps from 3⁄4–2 inches.

Mounting plates: � 16 gauge 32–54 × 12 or 24 inches (W × H) (extension plates for up to 72 inches available).

Finishes Silver or black powdercoat finish.

Special Features Provides an easy way for contractors to install exit devices on multiple types of gates.

Accessories/Options Additional guards, IC cylinder housing and keyed alike options available. Lever handles, mechanical combination locks and also electrified control trim lever handles available.

4. Technical Data Applicable Standards Americans with Disabilities Act (ADA) �� ADA 309.4 Operation

American National Standards Institute/Builders Hardware Manufacturers Association (ANSI/BHMA) �� ANSI 156.3 Grade 1 Type 1

ASTM International (ASTM) �� �ASTM A653 Standard Specification for Steel Sheet, Zinc- Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

National Fire Protection Association (NFPA) �� �NFPA 80 Standard for Fire Doors and Other Opening Protectives

�� NFPA 101 Life Safety Code®

Society of Automotive Engineers (SAE)

�� AISI/SAE J403 1008/1010

Underwriters Laboratories International (UL)

�� UL 305

�� UL Listed Panic Hardware �� �UL Listed Fire Exit Hardware for 3 hours, maximum 4 × 10 foot single doors and pairs of 4 × 8 feet with F90KR keyed removable Mullion

Spec-Data® is a registered trademark of Reed Elsevier Inc. The ten-part Spec-Data format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ©2016 CMD Group, LLC. All Rights Reserved.

Approvals �� �California State Fire Marshall 4140-0127:105 and 3725- 0127:108

�� State of Florida Approval FL90

5. Installation DAC Industries, Inc. provides complete installation instructions upon request.

6. Availability and Cost Availability Contact DAC Industries, Inc.: www.dacindustries.com.

Cost Contact DAC Industries, Inc. for pricing.

7. Warranty DAC Industries Inc. provides a one year warranty against any defects in material or workmanship for all kit components. Detex Corporation provides a limited ten year mechanical warranty on the exit device.

8. Maintenance Periodically inspect and lubricate the unit to extend its life.

Also, inspect to insure latch bolt is engaged properly.

9. Technical Services DAC Industries, Inc. provides phone support: 800-888-9768.

10. Filing Systems

��CMD

�� �Additional product information is available from the manufacturer upon request

Guards available for added security

6015 Gate Latch Protector

6017 Push Pad Protector