SUPER SKINNER specifications.docx
DOCX document 13 KB Posted
- Attached to
- 4 Machines for Skinning and Filleting Catfish
- Solicitation number
- 12405B22Q0277
About this file
This combined synopsis and solicitation requests quotes for the procurement of four machines for skinning and filleting catfish. The machines must meet detailed technical specifications including the ability to skin specified types of fish at rates of 15 whole fish or 25 fillets per minute. Quotes are due by July 29, 2022 at 4:00pm Central Standard Time and must include technical specifications and pricing including shipping costs. Award will be made to the lowest priced technically acceptable offer based on an evaluation of technical specifications and price under a firm fixed price contract. The soliciting agency is the United States Department of Agriculture Agricultural Research Service Field Research Implementation and Information Delivery.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| DE-HEADING MACHINE specifications.docx | DOCX document | |
| FILLETING AND SKINNING MACHINE specifications.docx | DOCX document | |
| KNIFE SHARPENING MACHINE specifications.docx | DOCX document | |
| Commercial Items Clauses.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SUPER SKINNER:
The machine must be the equivalent of Collum/Jet 870-SS SUPER SKINNER, a stand-alone heavy-duty, highly efficient skinning machine for fish. It should have the ability to skin the following kinds of fish: codfish, cod napes, dogfish backs and flaps, skate wings, dover sole, gray sole, pollack, yellow tail, dabs, rockfish, salmon, halibut, monkfish, pond-raised catfish, saltwater catfish, and eels.
The machine must remove the skin or scales from whole fish or fillets at a rate of 15 whole fish or 25 filets per minute. It should be constructed from stainless steel and aluminum parts. It will be approximately 23” wide (with 17 ½” working width), 36” high and 27” long and weigh approximately 375 pounds.
Mover: 110V/220V, single phase, 1.0 HP, 24 VAC control voltage.
It must contain a blade on a pivot assembly with an adjustable clearance between it and the toothroll. The adjustment is made by loosening the lock nut #110 and an adjustment screw. It must contain a stripper roll with an adjustable clearance over the toothroll. It should be equipped with three heavy duty needle bearings installed in their respective cartridges by the manufacturer only or pressed in and/or out using the equivalent of the Collum/Jet 870SS bearing press tool.
File details come from the government source that posted it. Updated .