STRATASYS SPECS SHEET.docx
DOCX document 28 KB Posted
- Attached to
- Statasys 450MC 3D Printer
- Solicitation number
- FA489726Q0030
About this file
Summary of Specification Sheet for Stratasys FORTUS 450MC GEN 3
This document is a specification sheet for the procurement of one Stratasys FORTUS 450MC GEN 3 Industrial Additive Manufacturing System by the 366th Maintenance Group at Mountain Home Air Force Base, Idaho. The system must meet specific technical requirements including achievable accuracy of ±0.127 mm (±0.005 inches) or ±0.0015 mm/mm, a build envelope of 406 x 355 x 406 mm, and power requirements of 208VAC 3-phase at 50/60 Hz consuming 18 Amps. The equipment must comply with regulatory standards including CE, cTUVus, RCM, EAC, and FCC Part B certification. The system includes a one-year warranty on both parts and labor.
The contractor shall be responsible for complete installation, setup, and configuration of the equipment in accordance with manufacturer specifications, ensuring proper operation, and conducting comprehensive training of Government personnel on all system functions. The contractor must provide ongoing technical support for one year following installation and shall diagnose and repair any equipment malfunctions within this period at no additional cost. Shipping is included in the quotation, with delivery to AFREP at Mountain Home AFB no later than 90 days after contract date. The contractor is accountable for maintaining facility cleanliness during installation, repairing any damage to Government property caused during the installation process, and ensuring the installation meets all applicable Air Force technical orders and specifications referenced in the document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA489726Q0030.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATION SHEET
Mountain Home AFB, ID Stratasys FORTUS 450MC GEN 3 11 Fed 2026
1. GENERAL: The 366th Maintanance Group located on Mountain Home AFB, ID requires One (1) Stratasys FORTUS 450MC GEN 3 Industrial Additive Manufacturing System to include installation, onsite training of Government personnel on all equipment and care program for future maintance of equipment.
2. FORTUS 450MC GEN 3 MINIMUM SPECIFICATIONS: The Industrial Additive Manufacturing System must (at a minimum) comply with the following salient characteristics:
2.1. Physical Characteristics
2.1.1. Achievable Accuracy: Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater). Z part accuracy includes an additional tolerance of -0.000/+ slice height.
2.1.2. 10/100 base T connection. Ethernet protocol. Wired: TCP/IPv6 protocols
2.1.3. Limited attendance for job start and stop required
2.1.4. Power Requirements: 208VAC 3 phase, 50/60 Hz, consumes 18 Amps
2.1.5. Build Envelope: (XYZ) 406 x 355 x 406 mm (16 x 14 x 16 in.)
2.1.6. Regulatory Compliance: CE, cTUVus, RCM, EAC, FCC Part B
2.2. Warranty
2.2.1. Parts: 1 year
2.2.2. Labor: 1 years
3. INSTALLATION: The Contractor shall provide all personnel, equipment, tools, materials, supervision, transportation, and other items needed to setup/install the requested FORTUS 450MC GEN 3.
3.1. The Contractor shall install all requested equipment in accordance with (IAW) manufacturer’s specifications.
3.2. The Contractor shall ensure proper operation of the installed FORTUS 450MC GEN 3.
3.3. Any equipment not functioning properly IAW manufacture’s specifications shall be diagnosed and repaired by the Contractor for 1 year.
3.4. The Contractor shall ensure cleanliness of Government facility is maintained at all times.
3.5. The Government will inspect facility for cleanliness prior to Contractor’s departure.
3.6. Any damage done to Government property by the Contractor shall be repaired by the Contractor at the Contractor’s expense.
4. TRAINING: The Contractor shall conduct training of entire system to Government personnel.
4.1. Following completion of installation by purchaser, the Contractor shall provide technical support if there are any issues either by telephone or in person for 1 year.
5. SPECIFICS:
3.1. Shipping must be included in the quotation.
3.1.1. Contractor shall deliver to AFREP – 230 Phantom Ave Bldg 920 Rm 113, Mountain Home AFB ID, 83648
3.1.2. Delivery will be no later than 90 days after date of contract (ADC).
6. References:
6.1. All Specifications IAW 34A series TOs, AC-18-04 and USAF Drawing 201879200.
File details come from the government source that posted it. Updated .