Statment of Work Amplifiers.pdf

Statement of Work/Specifications

BACKGROUND:

Spectrum measurement and analysis are core functions of the Institute for Telecommunication Sciences (ITS). The primary functions of several key programs at ITS, including Spectrum Monitoring, mm-wave, and the Radio Spectrum Measurement System (RSMS) programs, for example, are to measure and analyze different spectrum processes and parameters, e.g., usage, interference, signal and system characteristics, and propagation loss. ITS uses custom-built measurement systems to accomplish this.

ITS requires mm-wave components such as low-noise amplifiers, waveguide switches, noise diodes, coaxial cables, and antennas to be able to construct these custom-built measurement systems to support laboratory experiments and field measurements related to emerging fifth generation (5G) and sixth generation (6G) mobile wireless technology.

OBJECTIVE:

The objective of this procurement is to acquire five (5) low-noise amplifiers that operate at midband (3- 16 GHz) frequencies for development of ITS custom-built measurement systems.

Brand Name or equal:

L3 Narda-Miteq’s low noise amplifier model# LNA-40-00102600-30-10P:

At a minimum, the product shall include the following:

FUNCTIONAL SPECIFICATIONS:

FUNCTIONAL SPECIFICATIONS FOR THE LOW-NOISE AMPLIFIERS

1) Frequency Range (minimum span): 3GHz to 16 GHz

2) Gain: 40 dB Minimum

3) Noise Figure: 3 dB Maximum

4) Gain Flatness: ±2.5 dB Maximum

5) Output Power at 1 dB Compression: +10 dBm Minimum

6) Maximum RF Input Power: At least +10 dBm

7) Input VSWR: 2.7:1 Maximum

8) Output VSWR: 2.7:1 Maximum

9) Operating Temperature Range: At least -40°C to +75°C

10) Operating DC Voltage Range: Between, and including, +10VDC to +20VDC

11) Operating DC Current: 400 mA Maximum

12) Stability: Unconditionally Stable under any Load

13) Size: Less than 2.0” L x 1.5” W x 1.0” H (excluding connectors)

14) Input and Output Connectors: 2.92mm Female (also known as a “K(F)” connector)

FEATURES

• Unconditional Stability

• RF Ports Matched to 50 Ohms

• Internal DC Voltage Regulation

• Reverse Polarity Protection

• RoHS Compliant

TYPICAL APPLICATIONS

• Wireless Infrastructure

• RF Microwave and VSAT

• Military and Aerospace

• Test Instruments

• Fiber Optics

ELECTRICAL SPECIFICATIONS (@ 23°C)

Parameter Min Max Typ Units Frequency Range 0.1 26.0 - GHz Noise Figure - 3.0* 2.7 dB Gain (S21) 40 - 43 dB Gain Flatness - 2.5 2.2 ± dB Output Power @ 1dB Compression Point (P1dB) +10 - +13 dBm Input VSWR (S11) - 2.6 2.4 - Output VSWR (S22) - 2.5 2.0 - DC Supply Voltage +12 +18 +15 VDC DC Supply Current - 350 215 mA *Noise Figure May Exceed Limits Below 800 MHz

Absolute Maximum Ratings Mechanical Specifications

Parameter Ratings

DC Supply Voltage +20V RF Input Power +13 dBm Operating Temperature -40°C to +75°C

Parameter Value

Length 1.99 in [50.6 mm] Width 1.14 in [29.0 mm] Height 0.79 in [20.1 mm]

If proposing an equal product, the vendor shall include the name of the product ad the proposed specification sheet.

Delivery Schedule: Item requested by Nov 10, 2025 or 15 weeks ARO.