Statement of Work Wood Dust Collector.docx
DOCX document 17 KB Posted
- Attached to
- Dust Collector
- Solicitation number
- F2U3855153AG01
About this file
The document is a Statement of Work (SOW) for a wood dust collection system installation at Luke Air Force Base in Arizona. The project requires providing and installing a Nederman S-750 Dust Collector (7.5HP, 208V) with a 230-gallon dump bin, along with Nordfab galvanized-steel ducting to serve ten total drops for various woodworking machines including miter saws, table saws, bandsaws, and panel saws. The scope includes electrical services, two WEN ambient air filtration units, manual balancing gates, and dust collection hoses.
The related federal contract opportunity is a Firm-Fixed Price solicitation issued by the Department of the Air Force Air Education and Training Command, with solicitation number F2U3855153AG01. Key administrative notes include that funds are not currently available, questions are due by 20 August 2025, and the government reserves the right to cancel the solicitation. The installation requirements specify a minimum 12-month warranty, removal of the old system, shipping to the installation site, and all necessary equipment and vehicle rentals to complete the project.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QA Dust Collector.docx | DOCX document | |
| Anti-Terrorism Pamphlet.pdf | ||
| Salient Characteristics Dust Collector.pdf | ||
| Solicitation - FA488725Q0033.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Wood Dust Collection System for Bldg 948 Luke Air Force Base, Arizona
1. OVERVIEW:
This purpose of this project is to provide and install a new wood dust collection system for the Packing and Crating function of the Cargo Movement Section located at 6504 N. 142nd Ave Bldg 948. The wood dust collection system will serve the following machines: Miter saw (2 of 4", 1 of 1-3/4") Table saw (1 of 4") Bandsaw (2 of 4") Panel saw (1 of 8", 1 of 1-3/4") Two floor sweeps (4").
2. DESCRIPTION OF WORK:
2.1 Provide and install one (1) Nederman, S-750 Dust Collector, 7.5HP, 208V/60/3, with starter, for duct velocities between 3500-4000FPM. (Manual filter shaker included. Mechanical and automatic shakers are NOT NFPA compliant. 230-gal. dump bin included)
2.2 Collector to be located inside on the south side at the west end of the working space.
2.3 Collector will be anchored to the existing concrete floor via wedge-style concrete anchors.
2.4 Provide and install Nordfab, smooth bore, clamp-together, galvanized-steel dust collection duct and fittings.
2.5 Ducting to be supported from existing structure via 1/8", 7X7, stranded steel cable and Unistrut framing channel, as required.
2.6 New ducting to serve a total of ten (10) drops. Eight (8) active ports and two (2) floor sweeps.
2.7 Fabricate and install one (1) new capture plenum at panel saw.
2.8 Provide and install manual balancing gates at eight (8) drops serving active ports.
2.9 Provide and install Black, Thermoplastic Rubber, dust collection duct hose at eight (8) active ports.
2.10 Provide and install two (2) new, WEN, 3416T, 120V, 3-Speed Remote-Controlled (750/950/1270 CFM) ambient-air filtration units.
2.11 Ambient collector to be supported from existing structure via 1/8", 7X7, stranded steel cable and Unistrut framing channel, as required.
2.12 Provide one (1) set of two (2) extra inner air filters and one set of four (4) extra prefilters.
2.13 Provide professional electrical services as listed below:
- Install conduit, boxes, wire, from existing electrical panel to new 208V disconnect, continuing to new S-750 dust collector controls.
- Install push button star/stop on or near new S-750 dust collector.
| - Install one (1) new 120V outlet to serve air compressor auto-drain. |
| - Install two (2) new 120V outlets to serve ambient air cleaners. |
2.14 Bump collector fan motor to check rotation.
2.15 Install must include the cost of any equipment and rental vehicles needed to complete the installation.
2.16 Install must include the cost to ship the product to the installation site.
2.17 Install must include the removal of the old system and components and removal of all packaging for the new system.
2.18 Install must include a minimum of 12 months warranty for all parts and labor.
END STATEMENT OF WORK
File details come from the government source that posted it. Updated .