Statement of Work Phillips Federal.pdf

STATEMENT OF WORK

(SOW)

For 4th axis training and installation for

HAAS VF-4

PREPARATION DATE: (04/18/2022)

PREPARING ORGANIZATION: 552nd MXG/FAB TINKER AFB OK 73145

1. 552 MXS/MXMFM is requesting to pay for training and instillation for an 4th axis for our HAAS VF4 Mill to perform more complex machining operations. Currently our HAAS VF4 only has three axis. The 4th axis isn't only indexable but also capable of simultaneous motion making it to where we can significantly reduce our number of setups and work holding processes. There are certain parts that come up that cannot be performed with a 3rd axis. The 4th axis cuts cuts spiral and column shapes and complex curves that the 3 axis cannot cut. The 4th axis would be a plug and play because it is installed onto the VF4 that we have and it comes with the wiring harness that hooks up to the VF 4 itself. We would not require civil engineering to run a new power source from the Bus bar or panel box. Finally, HAAS CNC machines and 4th and 5th axis are what is used in all Metals Technology shops throughout the Air Force and in our tech school.

a. PURCHASE HAAS VF4 4th axis

b. PURCHASE TRAINING

c. PURCHASE INSTALLATION

d. DELIVERY TO TINKER AFB

2. The delivery personnel will be escorted on base and into the Metals Technology Shop and will need to be required to have the proper credentials to access a military instillation. this includes delivery personnel must be American citizen and have no criminal record.

3. Delivery personnel should coordinate special instructions (if any) with TSgt Carl Lindholm at (405)-736-7380 prior to delivery and on the day of delivery. Such as but not limited to when the technician will arrive.