STATEMENT OF WORK FOR DC SERVO MOTOR ASN R400-2A1A1B1.pdf

PDF 198 KB Posted

Attached to
Repair and recondition services for 25 each Motor
Solicitation number
1305M225Q0062
Issued by

About this file

This Statement of Work details the repair and reconditioning requirements for 25 NEXRAD Direct Current (DC) Servo Motors for the National Weather Service. The contract requires the contractor to repair and restore the motors to "Like New" operating condition according to specification drawing 2200220 Revision L, including replacing specified components like armature brushes, shaft bearings, and tachometer components. A first article process is mandated, where an initial batch of five motors will be shipped, with one motor repaired and submitted for quality inspection within 60 calendar days.

The contract includes specific inspection and replacement protocols, with the contractor responsible for comprehensive motor rehabilitation, cleaning, and painting. The vendor must provide a 1-year warranty against material workmanship and operational faults, and deliver a detailed repair report for each motor. Shipping will be to the National Reconditioning Center in Grandview, Missouri, with the vendor responsible for packaging that can withstand transportation by ship, rail, truck, and aircraft while preventing any damage to the motors' physical, electrical, mechanical, or cosmetic integrity.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Statement of Work Repair and Recondition: NEXRAD Direct Current (DC) Servo

Motor ASN: R400-2A1A1B1, NSN: 6105-01-394-5305

Description: The Contractor shall repair and recondition the DC Servo Motor to "Like New" operating condition, including cosmetic appearance in accordance with National Weather Service specification drawing no. 2200220 Revision L. The repair and reconditioning price shall include the parts, materials, labor, inspection and return shipping necessary to return the DC Servo Motor to operational specifications. Repair materials differing from the source specification must be approved by the National Weather Service prior to use.

Definition: “Like New” Condition means reconditioned to the listed specification to meet all applicable electrical, mechanical, and cosmetic specifications and Engineering documentation, including the replacement of damaged or missing non-functioning parts.

Government Furnished Equipment: 25 Servo motors, refer to solicitation line item #1.

Government Furnished Data: specification drawing no. 2200220 Revision L (when requested)

First Article: A first article will be required unless waived by the Government. Of the 25 Government Furnished Equipment (GFE) DC Servo Motors, an initial batch of five (5) motors will be shipped to the Contractor. The Contractor shall repair one (1) of these motors and return it to the National Reconditioning Center (NRC) Quality Control for inspection and evaluation.

The remaining four (4) motors shall be held by the Contractor and may not be repaired until written first article approval is issued by the Contracting Officer. Upon acceptance of the first article unit, the Government will ship the remaining twenty (20) motors within ten (10) business days, unless otherwise coordinated.

The Contractor shall complete the first article repair and return it within 60 calendar days after receipt. The Government will inspect the unit and notify the Contractor of approval, conditional approval, or disapproval within 14 calendar days of receipt. Upon written approval, the Contractor shall proceed with repair of the remaining 24 units (the four held units and the additional twenty) and deliver them within 60 calendar days from the date of first article acceptance.

Description of Work – Work Procedures:

The repair and reconditioning shall include the inspection, the replacement and warranty of all worn or damaged parts or components. Some parts and components are required to be replaced with every repaired and reconditioned unit. They are listed under “Replacement”. Other items may need repair or replacement on an individual basis dependent on the findings of the inspection and testing of the part. Items requiring inspection and test for each repaired motor are also listed below under “Inspection/Test”. All motors are to be cleaned and painted to like new condition before return to the NRC.

(Note: Refer to drawing 2200220 Rev L, item 2.9.3, when replacing the brushes holders and tachometer assemblies.)

Replacement:

1. Replacement of armature brushes, brush holders and caps.

2. Replacement of shaft bearings, oil seals and seal retaining springs.

3. Replacement of tachometer brushes.

Inspection

4. Inspection/ test/repair/replacement/cleaning of the tachometer. (As required)

5. Inspection/repair/replacement of tachometer brush holder assembly. (As required)

6. Inspection and replacement of housing magnets. (As required) 1

7. Inspection and rewinding/replacement of the armature. (As required)

8. Inspection/test/repair/replacement of internal wiring, external connectors, connector caps and chains. (As required)

9. Inspection/replacement of the motor housing (including magnets), front plate and motor end cap. (As required)

10. Ensure thermostat is disconnected (if installed) and pins J1C and D are attached to chassis/ ground).

11. Inspection/replacement/reattach identification and serial number plate. (As required)

12. Inspection/recondition/replacement of motor shaft to include key slot in accordance with dimensions listed in drawing 2200220 Revision L, Figure 1.

13. All Motors:

14. Cleaning and painting.

Warranty Terms: Vendor will provide a 1-year warranty against material workmanship and against faults occurring during operation. This 1-year warranty will begin after passing the final equipment inspection and acceptance for stock.

NRC Final Acceptance: All repaired and reconditioned DC Servo Motors are subjected to Quality assurance testing/inspection and will be returned for corrections if discrepancies are found in accordance with specification drawing no. 2200220 Revision L. The procuring activity and/or the government reserves the right to perform any of the inspections or witness tests set forth in this specification where such inspections/tests are deemed necessary to assure the motor conforms to the prescribed requirements. Any inspected item that does not meet the acceptance criteria will be returned to the vendor for rework at no additional cost to the government.

Deliverables: Each repaired and reconditioned DC Servo motor, by serial number, shall be supplied with a Repair Report documenting the repair, reconditioning and inspection to include results of all tests and failure analysis.

It is the contractor's responsibility to contact the Contracting Officer when a delay in delivery is anticipated. While we understand that occasional delays happen, especially in the existing supply chain issues, it's still important that we know in advance that a shipment will not arrive on time as stated in the order.

Shipping Address:

NATIONAL RECONDITIONING CENTER

(NRC) 14200 MERRITT RD.

GRANDVIEW, MO. 64030

Transportability: Vendor is responsible for returning repaired products in a shipping container designed to withstand the vibration and shock encountered during transportation by ship, rail, truck, and aircraft. The units shall be packaged to prevent damage to include:

physical, electrical, mechanical, cosmetic, and the units shall not be damaged or lose performance capability.

Final Note: When unforeseen problems arise that may need clarification, please contact the Contracting Officer who will notify the NRC. If the unit has any problem that prevents a quality repair, do not work on the item until the issue can be resolved.

File details come from the government source that posted it. Updated .