STATEMENT OF WORK Engraver.pdf
PDF 49 KB Posted
- Attached to
- Auto Body Laser Engraver
- Solicitation number
- JBSAF60447
About this file
Summary
This is a Statement of Work (SOW) for the 502d Contracting Squadron on behalf of Lackland Arts & Crafts (LAK Arts & Crafts) for the procurement, delivery, installation, configuration, and training of a complete desktop laser engraver system. The system must be equivalent to or branded as a VLS3.60DT and include a 50-watt laser platform with a minimum 24" x 12" working area, desktop footprint of approximately 34" x 14" x 25", and weight of approximately 170 lbs. The system requires 110V AC 10A or 220-240V 5A, 50/60Hz single-phase power. All equipment must be shipped FOB Destination to Lackland AFB, Texas.
The contractor must provide a heavy-use air filtration system (equivalent to BOFA Advantage Base 1 Oracle) capable of 250 CFM at 6 inches of static pressure, an ultra-quiet 1.0 HP oil-free tankless air compressor with desiccant dryer and oil remover, and essential accessories including air assist with 2.0" cone, downdraft cutting table, rotary attachment for cylindrical items, and lens and mirror replacement assemblies. A compatible laptop and graphic design software (equivalent to CorelDraw) are required, subject to 68d Communications Squadron (CIPS) approval prior to award. The contractor is responsible for full on-site installation, calibration, and configuration of all system components and on-site training for LAK Arts & Crafts personnel covering safe operation, basic maintenance, and software interface. The Government will provide the installation workspace and access to standard 110V AC electrical outlets.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Salient Characteristics Engraver.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK (SOW)
1. SCOPE OF WORK
The 502d Contracting Squadron, on behalf of Lackland Arts & Crafts (LAK Arts & Crafts), requires the procurement, delivery, installation, configuration, and training for a complete desktop Laser Engraver System. This system includes the laser platform, filtration system, necessary compressor and rotary accessories, and compatible IT hardware/software required for operation.
2. SALIENT CHARACTERISTICS / REQUIREMENTS
The Contractor shall provide a Laser Engraver System (Brand Name or Equal to VLS3.60DT) meeting the following minimum specifications:
2.1 Physical Characteristics:
• Platform/Working Area: Minimum of 24" x 12".
• Footprint: Base dimensions of approximately 34" x 14" x 25" (W x H x D), designed as a desktop unit requiring a sturdy work surface or air cleaner cart.
• Weight: Approximately 170 lbs.
2.2 Functional & Performance Characteristics:
• Power Output: 50-watt laser.
• Power Requirements: 110V AC 10A or 220-240V 5A, 50/60Hz Single-phase.
• Exhaust/Filtration System: Must include a heavy-use air filtration system (Brand Name or Equal to BOFA Advantage Base 1 Oracle) capable of moving 250 CFM at 6 inches of static pressure utilizing a 3-inch port, and a standard single hose connection kit.
• Essential Accessories:
• Air assist with 2.0" cone.
• Downdraft cutting table.
• Rotary attachment for cylindrical items.
• Laser Compressor: Ultra-quiet 1.0 Hp, oil-free, tankless air compressor with desiccant air dryer, oil remover, and required hoses/fittings (3/8" OD Black Air Compressor PU Line Hose).
• Lens replacement (2.0) and mirror assemblies (#2 and #3).
2.3 Information Technology (IT) Requirements:
• Computer & Software: Must include a compatible laptop to drive the laser system and graphic design software (Brand Name or Equal to CorelDraw). Note¿.All.IT.assets.
are.subject.to.68d.Communications.Squadron.(CIPS).approval.prior.to.award¡
3. SERVICES AND DELIVERY
3.1 Delivery:
All items shall be shipped FOB Destination to Lackland AFB, TX.
3.2 Installation and Setup:
The Contractor shall provide full on-site installation, calibration, and configuration of the laser engraver system, filtration system, and all provided accessories.
3.3 Training:
The Contractor shall conduct on-site training for LAK Arts & Crafts personnel on the safe operation, basic maintenance, and software interface of the provided laser engraver system.
4. GOVERNMENT FURNISHED PROPERTY/INFORMATION
The Government will provide the required installation workspace and access to standard electrical outlets (110V AC) necessary for the installation and operation of the equipment.
DRAFT.STATUS.‗.PENDING.FINAL.COMPLIANCE.CHECKS.AND.APPROVAL.BY.A.
WARRANTED.CONTRACTING.OFFICER¡
DRAFT STATEMENT OF WORK (SOW)
For.review.and.final.approval.by.a.warranted.Contracting.Officer.(CO)¡
1. SCOPE OF WORK
The 502d Contracting Squadron, on behalf of Lackland Arts & Crafts (LAK Arts & Crafts), requires the procurement, delivery, installation, configuration, and training for a complete desktop Laser Engraver System. This system includes the laser platform, filtration system, necessary compressor and rotary accessories, and compatible IT hardware/software required for operation.
2. SALIENT CHARACTERISTICS / REQUIREMENTS
The Contractor shall provide a Laser Engraver System (Brand Name or Equal to VLS3.60DT) meeting the following minimum specifications:
2.1 Physical Characteristics:
• Platform/Working Area: Minimum of 24" x 12".
• Footprint: Base dimensions of approximately 34" x 14" x 25" (W x H x D), designed as a desktop unit requiring a sturdy work surface or air cleaner cart.
• Weight: Approximately 170 lbs.
2.2 Functional & Performance Characteristics:
• Power Output: 50-watt laser.
• Power Requirements: 110V AC 10A or 220-240V 5A, 50/60Hz Single-phase.
• Exhaust/Filtration System: Must include a heavy-use air filtration system (Brand Name or Equal to BOFA Advantage Base 1 Oracle) capable of moving 250 CFM at 6 inches of static pressure utilizing a 3-inch port, and a standard single hose connection kit.
• Essential Accessories:
• Air assist with 2.0" cone.
• Downdraft cutting table.
• Rotary attachment for cylindrical items.
• Laser Compressor: Ultra-quiet 1.0 Hp, oil-free, tankless air compressor with desiccant air dryer, oil remover, and required hoses/fittings (3/8" OD Black Air Compressor PU Line Hose).
• Lens replacement (2.0) and mirror assemblies (#2 and #3).
2.3 Information Technology (IT) Requirements:
• Computer & Software: Must include a compatible laptop to drive the laser system and graphic design software (Brand Name or Equal to CorelDraw). Note¿.All.IT.assets.
are.subject.to.❶68d.Communications.Squadron.(CIPS).approval.prior.to.award¡
3. SERVICES AND DELIVERY
3.1 Delivery:
All items shall be shipped FOB Destination to Lackland AFB, TX.
3.2 Installation and Setup:
The Contractor shall provide full on-site installation, calibration, and configuration of the laser engraver system, filtration system, and all provided accessories.
3.3 Training:
The Contractor shall conduct on-site training for LAK Arts & Crafts personnel on the safe operation, basic maintenance, and software interface of the provided laser engraver system.
4. GOVERNMENT FURNISHED PROPERTY/INFORMATION
The Government will provide the required installation workspace and access to standard electrical outlets (110V AC) necessary for the installation and operation of the equipment.
File details come from the government source that posted it. Updated .