Statement of Work draft.pdf

20210913 Page 1

STATEMENT OF WORK

Measurement Science and Engineering Department

2x8 Fiber Optic Splitters

1. INTRODUCTION

The Naval Surface Warfare Center Corona (NSWCCO) Division, Measurement Science Department Precision Machining and Technology (PMT) Facility, Code MS24, fabricates components and systems in support of Fleet requirements as directed by United States Navy (USN) Program Offices in Washington.

2. BACKGROUND

Measurement Science and Engineering Department, Precision Machining and Technology Facility, Code MS24, fabricates hardware and components. MS24 uses outside manufacturing entities to synergize the capabilities of the PMT machine and established vendors sources to manufacture all the requisite components and coordinates the assembly, verification, inspection to support our Navy Fleet. Systems and Assemblies often can consist of hardware and components that is vendor manufactured to meet stringent design requirements for proper system performance as wells components that are manufactured in the PMT Facility.

3. SCOPE

Code MS24 has a requirement for the acquisition of 2x8 Fiber Optic Splitters that will be assembled into Fiber Optic Junctions Boxes. The 2x8 Fiber Optic Splitters shall be fabricated and tested by the vendor in accordance with drawing 7105556 Rev E and NOR 007.

4. APPLICABLE DOCUMENTS

DOCUMENT TYPE/NO. TITLE LINK DATE

DEPARTMENT OF

DEFENSE

SPECIFICATIONS

MIL-C-5541

Chemical Conversion Coating for Aluminum Alloys http://everyspec.com/MIL-SPECS/MIL-SPECS-

MIL-C/MIL-C-5541E_2379/

November

MIL-PRF-24792

Adhesive, Epoxy, Two Part, Fiber Optic http://everyspec.com/MIL-PRF/MIL-PRF-010000-

29999/MIL-PRF-24792A_41661/

November

MIL-A-46146

Adhesive-Sealants, Silicone, RTV, Non-corrosive http://everyspec.com/MIL-SPECS/MIL-SPECS-

MIL-A/MIL-A-46146A_31126/

March

ASTM-B209

Aluminum and Aluminum Alloy Sheet and Plate https://www.astm.org/Standards/B209.htm

ASTM-B221

Aluminum and Aluminum Alloy Extruded Bars, Rods, Wires, Profiles and Tubes https://www.astm.org/Standards/B221.htm

SAE-AMS-QQ-S-763

Steel, Corrosion Resistant, Bars, Wire Shapes, and Forgings https://www.sae.org/standards/content/amsqqs763c/

SAE-AMS-QQ-P-35

Passivated Treatments for Corrosion-Resistant Steel https://www.sae.org/standards/content/amsqqp35a/

ASTM-A967

Standard Specification for Chemical Passivation Treatments https://www.astm.org/Standards/A967.htm

20210913 Page 2 for Stainless Steel Parts

20210913 Page 3

DEFENSE STANDARDS

MIL-STD-130

Identification Marking of U.S Military Property http://everyspec.com/MIL-STD/MIL-STD-0100-

0299/MIL-STD-130N_5007/

November

MIL-STD-167-1

Mechanical Vibrations of Shipboard Equipment http://everyspec.com/MIL-STD/MIL-STD-0100-

0299/MIL-STD-167-1A_22418/

November

MIL-STD-810

Test Method Standard for Environment Engineering Considerations and Laboratory http://everyspec.com/MIL-STD/MIL-STD-0800-

0899/MIL-STD-810G_CHG-1_50560/

April

MIL-STD-2042

Fiber Optic Cable Topology Installation, Standard Methods for Naval Ships http://everyspec.com/MIL-STD/MIL-STD-2000-

2999/MIL-STD-2042_23630/

July 1993

DEFENSE HANDBOOKS

MIL-HDBK-217

Military Handbook Reliability Prediction of Electronic Equipment http://everyspec.com/MIL-HDBK/MIL-HDBK-

0200-0299/MIL-HDBK-217E_25657/

October

NAVSEA DRAWINGS

7105556, Rev. E Splitter, Fiber Optic, 2x8 See Attachment

7105556_NOR007

Splitter, Fiber Optic, 2x8 E/007

See Attachment

7104886, Rev. - Connector Plug, Fiber Optic, Single Terminus

See Attachment

7251717, Rev. B ST Coupler, SM See Attachment

7571682, Rev. - Adapter, Fiber Optic, Single Terminus

See Attachment

NON-GOVERNMENT

PUBLICATIONS

TIA/EIA-455-3A

FOTP-3 Procedure to Measure Temperature Cycling Effects on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components http://standards.globalspec.com/std/1182468/tia- 455-3

TIA-EIA-455-11C

FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables http://standards.globalspec.com/std/1747742/tia-eia- 455-11

TIA-EIA-455-32A

FOTP-32 Fiber Optic Circuit Discontinuities http://standards.globalspec.com/standards/detail?doc id=2030125

TIA/EIA 455-14-A

FOTP-14 Fiber Optic Shock Tests (Specified Pulse) id=1465897&familyid=VNTLHAAAAAAAAAAA

TIA/EIA-455-71A

FOTP-17 Procedure to Measure Temperature Shock Effects on Fiber Optic Components id=2030135

20210913 Page 4

5. REQUIREMENTS

The Offeror shall fabricate and manufacture up to 240 (Part Number 90-00000-00-70270) 2x8 Fiber Optic Splitters over a five-year ordering period in accordance to the drawings and NOR identified in Applicable Directives, Table A.