Statement of Work.pdf
PDF 100 KB Posted
- Attached to
- SETUP AND TRAINING FOR DREX STE
- Solicitation number
- N0016426Q0054
About this file
This is a Statement of Work (SOW) dated May 29, 2026, for General Dynamics Mission Systems (GDMS) to provide setup, configuration, training, and post-setup support services for one DREX Special Test Equipment (STE), Part Number 01-0057-4001-101, at Naval Surface Warfare Center (NSWC) Crane. The primary objective is to enhance testing capability for the AN/SPY-6(V) Organic DREX Depot through on-site equipment installation and personnel training.
GDMS is responsible for on-site setup, system configuration, training of up to 12 NSWC personnel, and post-setup technical support. NSWC Crane will provide one Condition "A" or "golden" Dual Channel Converter (DCC), Multi-Band Frequency Synthesizer (MBFS), and Auxiliary Power Controller Card (APCC) Lower Repairable Units (LRU) for verification and troubleshooting purposes, as well as a Clock Coding Module (CCM) or equivalent frequency time standard. GDMS will deliver software executables only; source code is excluded unless scoped as an additional effort. The system will operate on Red Hat Enterprise Linux (RHEL) 9, approved for use at the NSWC Crane facility. Work completion is defined as STE certification for operation at NSWC Crane, accomplished through completion of equipment setup and NSWC personnel training. The Period of Performance extends from the award effective date through January 2027. The technical point of contact is Jonathan Gregory at NSWC Crane (Phone: 812-854-5942; Email: jonathan.j.gregory.civ@us.navy.mil).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Dept of Labor Poster.pdf | ||
| N0016426Q0054.pdf | ||
| Wage Determination.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
GENERAL DYNAMICS MISSION SYSTEMS
5/29/2026
Scope/Background
This Statement of Work (SOW) outlines required tasks for General Dynamics Mission Systems (GDMS) to provide on-site setup, configuration, training, and post-setup support for quantity one (1) DREX Special Test Equipment (STE) (P/N: 01-0057-4001-101) to Naval Surface Warfare Center (NSWC) Crane. This will enhance testing capability for the AN/SPY-6(V) Organic DREX Depot.
1.0 Requirements
1.1 This work is based on the following:
NSWC Crane will provide quantity one (1) Condition “A” or "golden" Dual Channel Converter (DCC), Multi-Band Frequency Synthesizer (MBFS), and Auxiliary Power Controller Card (APCC) Lower Repairable Units (LRU) to verify STE operation and assist in troubleshooting.
NSWC Crane will provide a Clock Coding Module (CCM) or an equivalent frequency time standard.
Technical Interchange: NSWC Crane IT team will have a technical interchange with GDMS for secure enclaves to better understand the configuration effort to understand the effort prior to commencement of performance.
Operating System: Red Hat Enterprise Linux (RHEL) 9 is approved for operation at the NSWC Crane facility.
Deliverables: GDMS will provide Software (SW) executables only. Source code is not included but can be scoped as an additional effort.
1.2 Project Completion Criteria:
Work by GDMS will be considered complete when both of the following conditions are met:
The STE is certified for operation at NSWC Crane.
Certified is defined as completion of NSWC personnel training (expected up to 12 personnel) and equipment setup.
Period of Performance
The Period of Performance (PoP) for this effort is from effect date of award to January, 2027.
Technical Points of Contact
NSWC Crane
Jonathan Gregory Phone: 812-854-5942 Email: jonathan.j.gregory.civ@us.navy.mil
File details come from the government source that posted it. Updated .