Statement of Work.pdf

Statement of Work Code 139 Certification and Training Test Props

Section A: Scope

1. Objective:

Code 138.3 Test Examiners and code 139 training section need of updated training and certification test props to certify Code 139 nuclear non-destructive test inspectors.

2. Background/Introduction

Currently Code 138.3 utilizes bevel canopy type weld test props in the certification process of Code 139 nuclear inspectors. Bevel type canopies are rarely seen in production work. Code 139 typically encounters c-canopy type welds. Code 138.3 is trying to realign inspector certification testing with the inspectors’ actual deck plate work experiences. This requires changing out of bevel type weld canopies to c-canopy type welds.

3. Limitations of Work

N/A

Section B: Applicable Documents

4. Documentation:

Certification testing is required by NAVSEA 250-1500-1 Welding Standard and NSTR-99 Qualification Examination Requirements for Nondestructive Test Personnel.

Section C: Requirements

5. Scope of Work:

NNSY requires certification and training test props to support Code 139 nuclear production work. This will require the vendor to micro-drill holes in FIVE provided c-canopy test blanks. The holes shall be drilled in the corresponding locations shown on the drawings provided by NNSY for each canopy and they shall be drilled in the exact locations as shown on the drawings. The quantity and location of the holes will vary per test prop. The sizes of the holes will either be 1/64 inch or 1/32 inch as documented on the drawings. The 1/64 in hole shall be drilled to 0.003 inches in diameter by 0.009 inches deep.

The 1/32 inch hole shall be drilled to 0.0045 inches in diameter by 0.009 inches deep, as noted on the drawing.

6. Contractor Responsibilities: The Contractor shall drill the test props with micro-drilled holes based on the instructions provided in the drawings and create an AutoCAD or similar answer key and blank answer key that corresponds to the individual test props.

7. NNSY Responsibilities: NNSY will provide blank / not drilled test props and location, quantity, and size of holes to be drilled.

8. Government Furnished Property: Blank c-canopy weld props will be provided to the vendor.

9. Security Requirements: None.

10. Delivery Terms/Shipping/Transportation: Once complete, vendor will ship to Norfolk Naval

Shipyard, Bldg. 276 Beatty St. Portsmouth, VA 23709

11. Place of Performance/Delivery Location: The work will be performed at the contractor’s facilities.

12. Period of Performance (PoP)/ Completion Date/ Delivery Date: W Estimate: 6/30/2026 start, 12/31/2026 end (date of award plus 4 -6 weeks).

Section D: Contact Information

To Be Furnished Upon Contract Award.